• Korean Journal of Heritage: History & Science
• /
• v.48 no.4
• /
• pp.110-125
• /
• 2015

This study is objected to investigate the repairing method and the modification period of rafters via the transformation traces left in the superciliums, where repair process takes places frequently. This is the basic research of analyzing the architectural features of Deokkeori, one of the additional-rafter methods. Deokkeori method can be described as using Deokdori in the top section of Hayeon, and placement of Sangyeon above it. This method was started to be used since middle of the Joseon dynasty period(middle 18th Century) and mainly used at 19th Century to resist the transformation caused by repairing. It had been gradually developed from non-application stage to application stage including additional usage of complement. The architectural features of Deokkeori can be categorized into four. First, the usage of Deokdori to connect Sangyeon to the top section of Hayeon. It reduct the direct connection between Sangyoen and Hayeon, therefore give constructive benefits and prevent the downfall of the eaves by increasing the power which pressing the top section of Hayeon. Second, it gives the autonomy to the inside structure of ceiling by comprising it. By using Deokdori, the limit of top section's longitude was eliminated while also simplify the upper section by blocking the inside structures with ceiling. In addition, the complements occasionally seen in several buildings increase the power which pressing Hayeon. Third, the ceiling's slope has been changed to be concerned with Sangyeon, instead of Hayeon which was highly related with it before. The last factor is the thickness of rafters which used in Deokkeori. The diameter is thiner in Sangyeon than Hayeon.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.53-62
• /
• 1987

High power lasers provide a controllable and precise energy source in surface transformation hardening. A careful control of the process is needed in order that the surface layer of the material reaches the austenizing temperature, but that it does not melt. In order to achieve this the results of theoretical and experimental studies on the laser surface hardening of a medium carbon steel are described. A two-dimensional computer program, which can be used generally for the determination of transient temperature distributions in welding and heat treatment, was established on the basis of the finite element method. For the confirmation of the accuracy of the numerical analysis, a medium carbon steel (SM 45C) of 5mm thickness was heat-treated with a 1kW CW CO$_{2}$ laser machine, while the traverse speed and the distance from the focal point (defocused distance) were varied. Experimental and numerical results showed a similar tendency in correlations between the hardened zone shape and the process parameters. With increasing beam spot diameter the width and depth of the hardened zone increased for relatively small beam spot diameters, but decreased rapidly after reaching the maximum value, while with increasing traverse speed the width and depth of the hardened zone decreased monotonously. Too small beam spot diameters are to be avoided, since the surface melting would lower the surface hardness and produce an uneven surface which may be unacceptable because of the possible requirement for subsequent machining. It could be observed that for a given traverse speed and laser power input there exists a optimal range of the beam spot diameter, which produce a large width of the hardened zone but no melting on the surface.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3587-3593
• /
• 2009

Nowadays, the PV systems have been focused on the interconnection between the power source and the grid. The PV inverter, either single-phase or three-phase, can be considered as the core of the whole system because of an important role in the grid-interconnecting operation. An important issue in the inverter control is the load current regulation. In the literature, the Proportional+Integral (PI) controller, normally used in the current-controlled Voltage Source Inverter (VSI), cannot be a satisfactory controller for an ac system because of the steady-sate error and the poor disturbance rejection, especially in high-frequency range. By comparison with the PI controller, the Proportional+Resonant (PR) controller can introduce an infinite gain at the fundamental ac frequency; hence can achieve the zero steady-state error without requiring the complex transformation and the dq-coupling technique. In this paper, a PR controller is designed and adopted for replacing the PI controller. Based on the theoretical analyses, the PR controller based control strategy is implemented in a 32-bit fixed-point TMS320F2812 DSP and evaluated in a 3kW experimental prototype Photovoltaic (PV) power conditioning system (PCS). Simulation and experimental results are shown to verify the performance of implemented control scheme in PV PCS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2968-2974
• /
• 2010

Nowadays, the PV systems have been focused on the grid connection between the power source and the grid. The PV inverter can be considered as the core of the whole system because of an important role in the grid-interfacing operation. An important issue in the inverter control is the load current regulation. In the literature, Proportional Integral (PI) controller, which is normally used in the current-controlled Voltage Source Inverter (VSI), cannot be a satisfactory controller for an AC system because of the steady-sate error and the poor disturbance rejection, especially in high-frequency range. Compared with conventional PI controller, Proportional Resonant (PR) controller can introduce an infinite gain at the fundamental frequency of the AC source; hence it can achieve the zero steady-state error without requiring the complex transformation and the de-coupling technique. Theoretical analyses of both PI and PR controller are presented and verified by simulation and experiment. Both controller are implemented in a 32-bit fixed-point TMS320F2812 DSP processor and evaluated on a 3kW experimental prototype PV Power Conditioning System (PCS). Simulation and experimental results are shown to verify the controller performances.

• Sleep Medicine and Psychophysiology
• /
• v.19 no.1
• /
• pp.11-17
• /
• 2012

Objective: Among various methods developed to quantitatively explore electroencephalograms (EEG), we focused on a wavelet method that was known to yield robust results under nonstationary conditions. The aim of this study was thus to introduce the wavelet method and demonstrate its potential use in clinical sleep studies. Method: This study involved artificial EEG specifically designed to validate the wavelet method. The method was performed to obtain time-dependent spectral power and phase angles of the signal. Synchrony of multichannel EEG was analyzed by an order parameter of the instantaneous phase. The standard methods, such as Fourier transformation and coherence, were also performed and compared with the wavelet method. The method was further validated with clinical EEG and ERP samples available as pilot studies at academic sleep centers. Result: The time-frequency plot and phase synchrony level obtained by the wavelet method clearly showed dynamic changes in the EEG waveforms artificially fabricated. When applied to clinical samples, the method successfully detected changes in spectral power across the sleep onset period and identified differences between the target and background ERP. Conclusion: Our results suggest that the wavelet method could be an alternative and/or complementary tool to the conventional Fourier method in quantifying and identifying EEG and ERP biomarkers robustly, especially when the signals were nonstationary in a short time scale (1-100 seconds).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.473-479
• /
• 2004

In this paper, power density in near field is calculated about analytic object which has comparatively large volume in considering used wavelength such as cellular base station antenna. Panel sector antenna which is used widespreadly in domestic cellular wireless communication system is modeled and electromagnetic field distribution in reactive near field region is calculated by FDTD (Finite Difference Time Domain) method. After that, antenna gain in far field region is obtain by near to far transformation. Power spectral density in radiated near field is calculated in applying to gain-based model with antenna gain in far field. Finally, compliance distance is obtained in considering the result from radiated near field calculation and basic restrictions on occupational and general public exposure limits in ICNIRP guideline. In the center of main radiating position, the result from gain-based model is -14.55 ㏈m and the result from surface scanning method is -15.75 ㏈m. When the losses from cables and connectors used in measurement are considered, the results from gain-based model and surface scanning method are nearly coincident.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.13-20
• /
• 2020

One of the major issues surrounding big data is the availability of massive time-based or telemetry data. Now, the appearance of low cost capture and storage devices has become possible to get very detailed time data to be used for further analysis. Thus, we can use these time data to get more knowledge about the underlying system or to predict future events with higher accuracy. In particular, it is very important to define custom tailored contract offers for many households and businesses having smart meter records and predict the future electricity usage to protect the electricity companies from power shortage or power surplus. It is required to identify a few groups with common electricity behavior to make it worth the creation of customized contract offers. This study suggests big data transformation as a side effect and clustering technique to understand the electricity usage pattern by using the open data related to smart meter and KNIME which is an open source platform for data analytics, providing a user-friendly graphical workbench for the entire analysis process. While the big data components are not open source, they are also available for a trial if required. After importing, cleaning and transforming the smart meter big data, it is possible to interpret each meter data in terms of electricity usage behavior through a dynamic time warping method.

• Journal of IKEEE
• /
• v.14 no.2
• /
• pp.16-23
• /
• 2010

Since the interest of a brain science research is increased recently, various devices using brain waves have been developed in the field of brain training game, education application and brain computer interface. In this paper, we have developed a portable EEG measurement and a bluetooth based wireless transmission device measuring brain waves from the frontal lob simply and conveniently. The low brain signals about 10~100${\mu}V$ was amplified into several volts and low pass, high pass and notch filter were designed for eliminating unwanted noise and 60Hz power noise. Also, PIC24F192 microcontroller has been used to convert analog brain signal into digital signal and transmit the signal into personal computer wirelessly. The sampling rate of 1KHz and bluetooth based wireless transmission with 38,400bps were used. The LabVIEW programing was used to receive and monitor the brain signals. The power spectrum of commercial biopac MP100 and that of a developed EEG system was compared for performance verification after the simulation signals of sine waves of $1{\mu}V$, 0~200Hz was inputed and processed by FFT transformation. As a result of comparison, the developed system showed good performance because frequency response of a developed system was similar to that of a commercial biopac MP100 inside the range of 30Hz specially.

• Asia pacific journal of information systems
• /
• v.20 no.1
• /
• pp.33-56
• /
• 2010

The current business environment has been characterized as less munificent, highly uncertain and constantly evolving. In this environment, the company with dynamic capability is reported to be more successful than others in building competitive advantage. Dynamic capability focuses on the link between a dynamically changing environment, strategic agility, architectural reconfiguration, and value creation. Being characterized to be flexible and adaptive to market circumstance changes, an organization with dynamic capability is described to have high resource fluidity, which represents business process, resource allocation, human resource management and incentives that make business transformation faster and easier. Successful redeployment of the resources for dynamic adaptation requires organizational forms and reward systems to be well aligned with firm's technological infrastructures and business process. The alignment is considered to be an executive level commitment. Building dynamic capability is knowledge driven; relying on new knowledge to reconfigure firm's resources. Past studies established the link between the effective execution of a knowledge-focused strategy and relevant setting of architectural elements such as human resources, structure, process and information systems. They do not, however, describe in detail the underlying processes by which architectural elements are adjusted in coordinated manners to build knowledge-driven dynamic capability. In fact, understandings of these processes are one of the top issues in IT management. This study analyzed how a Korean corporation with a knowledge-focused strategy aligned its architectural elements to develop the dynamic capability and thus create value in the dynamically changing markets. When the Korean economy was in crisis, the company implemented a knowledge-focused strategy, restructured the organization's architecture by which human and knowledge resources are identified, structured, integrated and coordinated to identify and seize market opportunity. Specifically, the following architectural elements were reconfigured: human resource, decision rights, reward and evaluation systems, process, and IT infrastructure. As indicated by sales growth, the reconfiguration helped the company create value under an extremely turbulent environment. According to Ancona et al. (2001), depending on the types of lenses the organization uses, different types of architecture will emerge. For example, if an organization uses political lenses focusing on power, influence, and conflict. the architecture that leverage power and negotiate across multiple interest groups would emerge. Similarly, if an organization uses economic lenses focusing on the rational behavior of organizational actors making choices based on the costs and benefits of action, organizational architecture should be designed to motivate and provide incentives for the actors (Smith, 2001). Compared to this view, information processing perspectives consider architecture to be designed to maximize the capacity of information processing by the actors. Using knowledge lenses, the company studied in this research established architectural elements in a manner that allows the firm to effectively structure knowledge resources to form dynamic capability. This study is revelatory single case with a historic perspective. As a result of this study, a set of propositions and a framework are derived, which can be used for architectural alignment.

• Journal of the Korea Convergence Society
• /
• v.12 no.1
• /
• pp.243-250
• /
• 2021

In the medical field, applications of plasma are applied sterilize instruments mainly but with the advent of bio-plasma technology, the scope of application is expanding. Recently, In addition, high-density miniaturization with handheld is required for sophisticated procedures when irradiated directly or treated with non-standard conditions. Rosen-type PZT is a device with a structure that generates high voltage plasma by achieving voltage transformation through electro-mechanical coupling using piezoelectric effect.and is used in portable plasma generating devices as an advantage to increase energy density relatively. In this paper, Rosen-type PZT was modeled using equivalent circuits and was carried out and a plasma generating device for medical application was designed and prototype tested. Prototype plasma generating device generates an output voltage of 5.8 kV with 12V input power and is designed to operate at high voltage by applying the half-bridge topology power converter. The results of the study confirmed the availability of various medical devices, such as plasma jets or direct exposure equipment.