• Journal of Welding and Joining
• /
• 제25권3호
• /
• pp.85-91
• /
• 2007

The conventional study on the laser surface transformation hardening has been carried out with a beam of the specified shape and uniform power-intensity distribution in order to ensure the uniformity of the hardening depth. Two types of beams - the circular gaussian beam and rectangular beam of the uniform power-intensity distribution were used in this study. we were supposed to optimize the process parameters and to compare the hardening results with two optics respectively. As a result, the hardness distribution of the hardened zone was similar in both cases and the hardened phase by the rectangular beam was denser than that by the circular gaussian beam.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.243-245
• /
• 2001

This paper presents a new classification method for high impedance faults in power systems. Results of phase plane trajectory with Clarke modal transformation using postfault current and voltage are utilized to classify types of arcing faults. The performance of the proposed method is tested on a typical 154 kV korean transmission system under various fault conditions using EMTP. As can be seen from results, phase plane trajectory of postfault current should be combined with that of o component from Clarke modal transformation to give reliability of clear fault classification. Thus the proposed method can classify arcing faults including LIFs and HIFs accurately in power systems.

• Journal of Power Electronics
• /
• 제19권4호
• /
• pp.1045-1053
• /
• 2019

A symmetrical component decomposition scheme utilizing the characteristics of the asynchronous rotational reference frame transformation is proposed in this paper for the extraction of the positive and negative sequence components of distorted three-phase grid voltages. The undesired frequency component can be removed using a specially designed series coordinate transformation and half-cycle delays, where the delay can be controlled by adjusting the frequency of the rotating reference frame. The extracted symmetrical component can then be compensated based on the applied coordinated transformation. The dynamic response of the proposed algorithm is improved when compared to that of conventional methods. The effectiveness of the proposed algorithm is verified by simulation and experimental results.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1347-1356
• /
• 2018

In a three-phase system, three-phase AC signals can be translated into two-phase DC signals through a coordinate transformation. Thus, the PI regulator can realize a zero steady-state error for the DC signals. In the control of a three-phase grid-connected inverter, the phase angle of grid is normally detected by a phase-locked loop (PLL) and takes part in a coordinate transformation. A novel control strategy for a three-phase grid-connected inverter with a frequency-locked loop (FLL) based on coordinate transformation is proposed in this paper. The inverter is controlled as a current supply. The grid angle, which takes part in the coordinate transformation, is replaced by a periodic linear changing angle from $-{\pi}$ to ${\pi}$. The changing angle has the same frequency but a different phase than the grid angle. The frequency of the changing angle tracks the grid frequency by the negative feedback of the reactive power, which forms a FLL. The control strategy applies to non-ideal grids and it is a lot simpler than the control strategies with a PLL that are applied to non-ideal grids. The structure of the FLL is established. The principle and advantages of the proposed control strategy are discussed. The theoretical analysis is confirmed by experimental results.

• 대한전자공학회논문지SD
• /
• 제40권9호
• /
• pp.692-701
• /
• 2003

본 논문에서는 저 전력소모와 높은 테스트용이성을 동시에 고려하기 위한 새로운 게이트 레벨 논리변환 방법을 제안한다. 주출력에서 관측될 확률이 낮은 CFF(Compact Fanout Free)를 찾아내고, 해당 CFF가 모든 주출력에서 관측불가능한 조건에서는 리던던트 연결을 첨가하여 내부에서 발생하는 스위칭 동작을 제거한다. 일반적으로 논리 변환된 회로의 테스트 용이성은 떨어지는 경향이 있다. 그러나 제안된 방법에서 첨가된 리던던트 연결은 테스트 모드에서 테스트 포인트로 동작하며 CFF의 제어도와 관측도를 동시에 향상시키게 된다. 따라서 논리 변환된 회로는 정상 모드에서는 전력 손실이 매우 낮으며, 테스트 모드에서는 높은 테스트용이성을 갖는다. 제안하는 논리 변환 방법의 효율성을 보이기 위하여 MCNC 벤치마크 테스트 회로에 대하여 실험을 수행하였다. 실험 결과로부터 변환된 회로의 전력소모는 최대 13%정도 감소하며, 고장 검출율은 오히려 증가함을 확인할 수 있다.

• 전자공학회논문지SC
• /
• 제44권5호
• /
• pp.11-17
• /
• 2007

각종 전자 제품 및 부품의 외관 검사는 사람의 시각에 의해 이루어졌다. 그러나 사람의 시각에 의한 외관 검사 결과는 검사자의 육체적, 정신적 상태에 따라 변하기 때문에, 일정한 검사 결과를 얻을 수 없다. 따라서 사람에 의한 검사 대신 머신 비전 검사 시스템이 많은 외관 검사 분야에 사용되고 있다. 그러나 머신 비전 시스템의 외관 검사 결과는 작업장의 조명에 의해 변하게 된다. 이에 본 논문에서 우리는 비전 검사 정확도의 개선을 위해 멱함수 변환과 히스토그램 지정 기법을 사용했다. 그리고 멱함수 변환과 히스토그램 지정 알고리즘을 통해서 비전 검사의 정확도를 향상시키고, 검사자의 육체적, 정신적 상태에 따른 검사 오류를 막을 수 있었다. 또한 이 시스템은 일반적인 검사 환경을 위해서 PC, CCD 카메라와 비주얼 C++ 만을 사용해서 개발됐다.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1796-1801
• /
• 2008

In this paper, a new current based maximum power point tracking (CMPPT) method is proposed for a single phase photovoltaic power conditioning system and the current based MPPT modifies incremental conductance method. The current based MPPT method makes the entire control structure of the power conditioning system simple and uses an inherent current source characteristic of solar cell array. In addition, digital phase locked loop using an all pass filter is introduced to detect phase of grid voltage as well as peak voltage. Controllers about dc/dc boost converter, dc-link voltage, dc/ac inverter is designed for a coordinated operation. Furthermore, PI current control using a pseudo synchronous d-q transformation is employed for grid current control with unity power factor. 3kW prototype photovoltaic power conditioning system is built and its experimental results are given to verify the effectiveness of the proposed control schemes.

• 전기학회논문지
• /
• 제56권3호
• /
• pp.524-530
• /
• 2007

This paper presents a new and simple method for sensorless operation of matrix converter drives using a constant air-gap flux and the imaginary power flowing to the motor. To improve low-speed sensorless performance, the non-linearities of a matrix converter drive such as commutation delays, turn-on and turn-off times of switching devices, and on-state switching device voltage drop are modelled using PQR transformation and compensated using a reference power control scheme. The proposed compensation method is applied for high performance induction motor drives using a 3 kW matrix converter system. Experimental results are shown to illustrate the feasibility of the proposed strategy.

• 한국정보통신학회논문지
• /
• 제6권3호
• /
• pp.421-426
• /
• 2002

Hybrid cascade multilevel PWM inverter has advantages of hybrid structure which enhances the better utilization of power semiconductor switches, that is, both hi호 power-low frequency switch, GTO and low power-high frequency switch, IGBT can be used in the same circuit. In this paper, a static var compensator using hybrid cascade 5-level PWM inverter is presented for high voltage/high power applications. The proposed system is modelled by circuit DQ transformation, and thus an equivalent circuit is obtained which reveals the important characteristics of the system and lead to the related equations. Finally, circuit structure and characteristics is presented and the validity of the characteristics analysis is shown through PSIM simulation.

• 대한전기학회논문지
• /
• 제35권4호
• /
• pp.148-155
• /
• 1986

This paper presents a new decoupled power system state estimation method. The decoupling is achieved via simple linear transformation on power measurements in contrast with the modified fast decoupled state estimation method which assumes decoupling by direct negligence of the off-diagonal blocks of the observation functions. The new estimation method is compared with the modified decoupled state estimation method against IEEE-14 bus model power system and 25 bus model power system in several system conditions. It is observed that the proposed method shows better convergence performance and filtering performance than a modified fast decoupled state estimation.