• 한국정밀공학회지
• /
• 제33권7호
• /
• pp.535-540
• /
• 2016

The braking device in railway vehicles decelerates or stops the train by dissipating the thermal energy converted from kinetic energy into the air. Therefore, the brake system is crucial for safety. In this paper, we performed a study on an electromechanical brake actuator using an electrical motor as an alternative to pneumatic air cylinders to reduce the idle running time in braking, which subsequently increases braking distance, and to ensure reliable response characteristics. Especially, to analyze the response characteristics of the electromechanical brake actuator, we measure the delay time, response time and power consumption compared to the air cylinder. It is confirmed that the electromechanical brake actuator can reduce reaction time by 0.1 seconds (Braking Action) and 0.46 seconds (Brake Release) compared to the air cylinder.

• 에너지공학
• /
• 제23권3호
• /
• pp.132-145
• /
• 2014

수소연료전지자동차(FCV)의 냉온기동, 가속, 주행성능, 수소연료충전시간, 및 항속거리 등의 기술 항목들은 2015-2020년경의 수요자요구를 충족하는 것으로 보인다. 그러나 짧은 내구성, 높은 가격 및 부족한 수소공급인프라 등은 본격적인 FCV 상용화를 위하여 극복해야 할 과제이다. 가격저감 및 내구성 향상 등 연료전지자동차의 상용화를 위하여 개발되고 있는 기술과제들을 중심으로 수소연료전지자동차의 기술동향을 분석한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.173-176
• /
• 2003

TOA(Time of Arrival) 및 TDOA(Time Difference of Arrival)경우 무선국의 시간동기화를 위해서 고도의 기술을 요구하고 있으며, 시간동기오차에 따른 위치검지의 정밀도가 낮아지는 문제가 있어 이를 극복하기 위하여 위상차(PDOA)를 이용한 새로운 열차검지기법의 제안에 따른 구현을 위하여 H/W의 설계에 대하여 기술하고자 한다 본 시스템은 전과의 전달 속도($\lambda$)를 응용하여 기준 주파수인 1.5MHz를 송신 시스템과 수신 시스템의 기준 주파수와 비교하여 그 위상의 차이를 비교하여 지연된 시간을 구한 후 이를 거리로 환산하는 시스템으로서 H/W와 S/W로 구분하여 구현 $\cdot$ 설계되는데 본 논문에서는 H/W설계에 대하여 기숙하였다.

• 한국유체기계학회 논문집
• /
• 제16권3호
• /
• pp.32-38
• /
• 2013

This paper deals with the study on the rotordynamic and experimental analysis of turbine-generator system connected with a magnetic coupling. Although magnetic coupling has been used to torque transmission of chemical processing pump rotating at under 3,600rpm, magnetic coupling in this study is applied to high-speed turbine-generator system using a working fluid that is refrigerant such as ammonia or R-124a. Results of rotordynamic design analysis are as follows. The first, shaft diameter nearest to outer hub of magnetic coupling has a big effect on the $1^{st}$ critical speed of generator rotor. The second, if the $1^{st}$ critical speeds of turbine rotor and generator rotor have enough to separation margin in comparison to rated speed, the $1^{st}$ critical speed of turbine-magnetic coupling-generator rotor train has enough to separation margin regardless of connection stiffness of magnetic coupling. The analytical FE model is guaranteed by impact test on the prototype and condition monitoring such as measurements of vibration and bearing temperature is also performed.

• Journal of Mechanical Science and Technology
• /
• 제16권12호
• /
• pp.1604-1612
• /
• 2002

Rollers in the continuous process systems are ones of key components that determine the quality of web products. The condition of rollers (e.g. eccentricity, runout) should be consistently monitored in order to maintain the process conditions (e.g. tension, edge position) within a required specification. In this paper, a new diagnosis algorithm is suggested to detect the defective rollers based on the frequency analysis of web tension signals. The kernel of this technique is to use the characteristic features (RMS, Peak value, Power spectral density) of tension signals which allow the identification of the faulty rollers and the diagnosis of the degree of fault in the rollers. The characteristic features could be used to train an artificial neural network which could classify roller conditions into three groups (normal, warning, and faulty conditions) The simulation and experimental results showed that the suggested diagnosis algorithm can be successfully used to identify the defective rollers as well as to diagnose the degree of the defect of those rollers.

• 한국자동차공학회논문집
• /
• 제17권5호
• /
• pp.127-132
• /
• 2009

The transient performance of the passenger diesel engine equipped with the variable geometry turbocharger was simulated using HIL(hardware-in-the-loop) system. The system consists of engine model as software, and the turbocharger test bench as hardware. The engine model is mean value model which is programmed by the Simulink of the Mathworks. The turbocharger test bench is composed of a blower, some sensors, and DAQ boards. A real time simulation is possible since the operating system based on the real time is included. The results show the good response for the transient characteristics. Therefore this HIL system can be used for development of the new turbocharger effectively.

• 한국자동차공학회논문집
• /
• 제15권6호
• /
• pp.165-169
• /
• 2007

The purpose of this study is to investigate the effect of rotating unbalance mass on vibration characteristics of the front axle. The power-train systemof the vehicle is composed of several rotating parts. These component parts should be properly balanced by the balancing machine, however,sometimes these have the unbalance mass which causes the critical vibration in the vehicle. Therefore, this study suggests the vibration improvement method based on reducing the unbalance mass through changing the assembly type between the companion flange and the constant velocity joints. In addition, the way to increase the inertia moment of the companion flange was proposed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.621-624
• /
• 2005

Among many auditory feelings for the vehicle interior noise, booming is considered as the most important nuisance to the passenger and developer. Because the main source of booming noise is a power train system including engine, in general, it consists of tonal components related to fundamental engine rotation and its harmonics including the firing frequency. Therefore, it is demanded to extract the effective tonal components only by using pitch extraction algorithm based on the place theory enable to find aurally relevant tonal components. However, there is a difference between booming sensation and pitch perception according to frequency change of tonal component. In this study, subjective listening test using a tracking method was performed to find the difference limen for just noticeable change of booming sensation in frequency. 20 Koreans and 10 Japanese were participated in this test and the results obtained from Koreans and Japanese were compared with each other. Finally, 5Hz was determined as the difference limen for just noticeable change of booming sensation in frequency, and by applying this value to booming analysis using pitch concept, it was confirmed that the degree of prediction of booming sensation was improved.

• 비파괴검사학회지
• /
• 제31권2호
• /
• pp.118-126
• /
• 2011

초음파가진 열화상시험 중 가진 방법이 시편에 가진된 진동의 시스템 응답 특성에 미치는 영향에 대하여 연구하였다. 복잡한 현상을 가진 터빈 블레이드 시편에 가진된 진동의 특성을 분석하기 위하여 고출력 가진이 가능한 초음파 혼이 사용되었다. 초음파 혼에 입력되는 신호의 특성이 가진된 진동의 특성에 미치는 영향에 대하여 연구하였고 블레이드를 클램프에 고정한 후 가진기와 클램프를 연결하는 방법이 진동신호에 미치는 영향에 대해서도 연구하였다. 연구 결과를 통하여 첩(chirp) 입력선호와 볼트를 사용하여 클램프와 혼을 연결하는 방법을 가진 방법으로 제안하였다. 이러한 가진 방법은 다양한 종류의 터빈 블레이드 뿐만 아니라 다른 기계부품들의 시험에 적용될 수 있다.

• 한국CDE학회논문집
• /
• 제13권1호
• /
• pp.45-57
• /
• 2008

A submarine good military weapon because of its confidentiality and intimidating power. Therefore, training warfighters how to maneuver submarine is very important. Because submarine is very expensive and has regional and temporal limitations, M&S(Modeling and Simulation) can be a good alternative. However, as the existing M&S systems of submarine generally use expensive commercial software and dedicated hardware, which cause the warfighters to take troubles to visit the secured places, and then to train themselves during limited time slots. Also, many M&S systems have only one-channel display system which reduces the sense of immersiveness. Another problem is that many heterogeneous simulators can hardly be used as an integrated system. To solve these problems, X3D, a platform-independent and open standard graphic file format, is used with the general-purpose PCs. To increase immersiveness, multi-channel display system and a motion chair are used. Finally, HLA/RTI is used to integrate individual components of the simulator. All of these are verified through experiments.