• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전력기술부문
• /
• pp.62-64
• /
• 2008

본 연구에서는 펄스다중화 보조회로론 이용한 18-step Back-to-Back 전압원 컨버터를 제안한다. 제안하는 Back--Back 전압원 컨버터는 교류연계점에서 유 무효전력의 독립적인 제어가 가능하다. 펄스수를 증가시키는 방법은 이론적인 접근을 통해 분석하였으며, 제안하는 시스템의 동작은 PSCAD/EMTDC 소프트웨어로 시뮬레이션 모델을 개발하여 확인하였고 실질적인 성능검증은 하드웨어 축소모형을 제작하고 실험을 통해 실시 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.63-66
• /
• 2002

본 논문에서는 북한 및 남한의 수도권 지역을 중신으로 한 부하집중지역들의 전력 부족을 해결하기 위한 대안으로서 신포에 세워질 2000MW의 원자력을 이용할 수 있는 방안을 검토하고자 한다. 특히 남한은 향후 계측적인 전력 수요의 증가로 인한 발전력의 부족을 해결할 마땅한 대책이 없으리라 여겨진다. 이러한 문제에 있어 해결책은 첫째로 북한의 2000MW KEDO 원전에서 북한의 일부 부하집중지역 (특히 평양주변)에 공급하면서 남한의 수도권지역에 전력을 공급하는 것이 가능한 대안 중의 하나로 여겨진다. 본 논문에서는 KEDO 원전의 전력을 흘려보내기 위한 시나리오 작성 및 진력 조류흐름을 파라하는 것을 목적으로 한다. 시뮬레이션은 미국 PTI사의 PSS/E 패키지를 사용하였으며, 조류 계산을 하여 그 결과를 전력흐름도로 작성하고 비교 검토하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.409-411
• /
• 2004

The need for Fault Current Limiters (FCL) is associated with the continuous growth and interconnection of modem power systems and increase in dispersed generation facilities, which result in progressive increase in the short circuit capacity far beyond their original design capacity. Fault Current Limiters (FCL) clips the fault currents and reduces the electromechanical stresses on the network and the need to handle excessive fault currents. In addition, the reduction of the fault duration Provided by the limiter should increase the power transmission capability and improve the dynamic stability. This paper proposes the model of resistive type superconducting fault current limiter using EMTDC(Electromagnetic transients for DC analysis program). In order to verify the effectiveness of the SFCL, in this paper, the analysis of fault current in a transmission system through the EMTDC based simulation by using the modeled component of a resistive type SFCL is peformed and the detailed results are given.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.914-919
• /
• 1998

A Capacitor Commutated Converter (CCC) has less difficulty of commutation failure in comparison to the conventional line commutated converter. This paper proposes the Ar1R control of the CCC in the inverter operation, which deserves as the Ar1R of the conventional converter. The CCC can be operated in high power factor area by using the proposing Ar1R control. The voltage stability at an AC bus connected the CCC inverter is investigated and estimated its ability of preventing the AC voltage collapse. To estimate the voltage stability, this paper developed the simplified converter mathematical model and led the VSF index. The results shows that the AC voltage stability is guaranteed and enables the interconnection to an weak AC system, when compensation factor of the compensation capacitor is higher than 200%.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.717-719
• /
• 2005

This paper summarizes the results of these efforts by of offering the PV generation system with solar tracking. The status of PV generation system with solar tracking components and interconnection and effects are summarized. Hence this paper duscusses only points that might be useful for application.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 International Symposium
• /
• pp.93-100
• /
• 2003

The continuing scaling trend in microelectronic circuit technology has a significant impact on the different IC interconnection and packaging technologies. These latter technologies have not kept pace with the IC scaling trends, resulting in a so-called“interconnect technology gap”. Multilayer thin film technology is proposed as a“bridge”- technology between the very high density IC technology and the coarse standard PCB technology. It is also a key enabling technology for the realisation of true“System-in-a-Package”(SIP) solutions, combining multiple“System-on-a-Chip”(SOC) IC's with other components and also integrating passive components in its layers. A further step is to use this technology to realise new functionalities on top of active wafers. These additional“above-IC”processed layers may e.g. be used for low loss, high speed on chip interconnects, clock distribution circuits, efficient power/ground distribution and to realize high Q inductors on chip.

• 전자공학회논문지B
• /
• 제33B권1호
• /
• pp.38-48
• /
• 1996

본 논문에서는 컴퓨터 비젼응용을 위한 태스크레벨 파이프라인 멀티컴퓨터인 "RV860-PIPE(Realtime Vision i860 system using PIPEline)"를 구현하고 성능평가 하였다. RV860-PIPE는 MIMD형태의 아키텍쳐를 가지며, 시각처리에 적합한 ring 형태의 상호연결망(interconnection network)을 갖는 매시지 패싱타입의 컴퓨터로 구현되었다. RV860-PIPE의 단위 노드 컴퓨터는 일반적인 시각알고리즘의 수행을 위하여 법용성과 강력한 처리능력을 갖도록 64-bit 프로세서를 사용하여 설계하였다. 또한 단위 노드간 양방향 통신 및 영상 입출력기와의 통신 부담을 덜기 위한 전용화된 고속 통신 채널을 설계하였다. 구현된 시스템은 edge 검출, 실시간 이동물체 추적, 실시간 얼굴인식과 같은 시각 처리 응용프로그램들을 성능평가함으로써 컴퓨터 비젼응용에 실용적으로 적용가능함을 보였다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2012년도 춘계학술논문집 2부
• /
• pp.512-516
• /
• 2012

Recently the Korean government's green energy growth policy has been taken at the national level due to the sufficient supply of renewable energy. Some specific technique should be taken in consideration for the operation of the grid voltage and power quality management. In this case, there may have some chance of operational problems. Typical problems arise when grid-connected solar power produced by Pacific sunshine. The power flow in the reverse direction can create overvoltage on the distribution line and gives value of malfunction on the system. Line voltage and overvoltage adjustment practice can stop these symptoms occurred. Under these circumstances, this paper presents an interconnection test devices for photovoltaic(PV) systems composed of distribution system simulator, PV system simulator and control and monitoring systems using the LabVIEW S/W, and simulates the customer voltage characteristics considering the 3 parameters on the introduction capacity for PV systems, system configuration and Power factor. This paper also proposes a new calculation algorithm for voltage profile to make comparison between calculation values and test device values. The results show that the simulation results for the normal operation characteristics of PV systems which are very practical and effective.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.393-396
• /
• 1989

This paper deals with the design of the adaptive controller using a decentralized control for Large-Scale system formed of an arbitrary interconnection of subsystem with unknown parameters, non linearity and bounded disturbance. In order to reduce the load and frequency deviations, now decentralized adaptive controllers are developed for stabilization and tracking the parameters. In the simulation studies of the decentralized adaptive control of a two-area interconnected power system, the effectiveness of the proposed adaptive is demonstrated.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.103-105
• /
• 2008

In grid-interconnection system, a fast, robust and precise phase angle detector is most important to grid synchronization and the active power control. The phase angle can be easily estimated by synchronous dq PLL system. On the other hand under unbalanced voltage condition, synchronous dq PLL system has problem that harmonics occur to phase angle or magnitude of grid voltage because of the effect of the negative sequence components. So, To eliminate the negative sequence components, the PLL method using APF (All Pass Filter) in a stationery reference frame to extract positive sequence components under unbalanced voltage condition is researched. In this paper, we propose a new PLL method with decoupling network using APF in a synchronous reference frame to extract the positive sequence components of the grid voltage under unbalanced grid. The cut-off frequency of APF in a synchronous reference frame can be set to twice of the fundamental frequency comparing with that of APF in a stationery reference frame which is the fundamental frequency. The proposed PLL strategy can detect the phase angle quickly and accurately under unbalanced gird voltages. Simulation and experimental results are presented to verify the proposed strategy under different kind of voltage dips.