• KEPCO Journal on Electric Power and Energy
• /
• 제5권4호
• /
• pp.311-321
• /
• 2019

정부의 재생e 3020 이행계획 및 제 8차 전력수급 기본계획과 함께 국내 분산 전원 연계 사업이 활발하게 진행되고 있다. 특히 2016년 10월 시행된 1 MW이하의 분산 전원 접속 보장 제도의 시행 이후, 배전 계통의 분산 전원 연계 신청이 급증함에 따라 송배전 설비부족으로 분산 전원 접속 지연이 일어나는 문제와, 이로 인해 국내 분산 전원의 70 %가 연계되어 있는 배전 계통의 신증설 투자비가 증가하는 문제가 이슈로 부각되고 있다. 현재 배전 계통의 분산 전원 수용력(hosting capacity) 확보 방법은 물리적인 배전 설비 추가 확충 이외에는 대안이 없는 것이 현실인데, 이러한 방식은 아래와 같은 어려움이 따른다. 첫째, 분산 전원의 대다수를 차지하는 태양광은 일조량이 풍부하고 지가가 저렴한 야외, 산악지역에 보급되므로 배전선로 경과지 확보가 점점 어려워지고 있다. 이로 인해 지중 구간이 증가하여 공사비가 증가하며, 태양광 야외 지역 위치로 공사 거리, 기간이 증가하게 된다. 둘째, 지자체의 공사 인허가 비협조 사례가 증가하여 이로 인해 공사가 지연되어 민원이 야기된다. 셋째, 배전선로 공사 자체에 1년 이상의 공사기간이 소요되므로 분산 전원을 적기에 접속시킬 수가 없으며, 넷째, 접속 신청은 지속 증가하므로 이에 따라 배전 설비 확충 비용 또한 지속 증가 할 수 밖에 없다. 이렇게 물리적 설비확충으로 발생하는 문제에 대응하여 접속 대기를 최소화하면서도 공사(투자비)를 최소화 할 수 있는 방안은 설비이용률을 극대화하는 것이며, 본 연구는 이러한 고민에서 시작되었다. 그러므로 본 논문에서는 현재 배전 계통의 분산 전원 연계 현황, 태양광 최대 출력 실적, 최소 부하, 선로 특성의 분석을 통해 배전선로의 분산 전원 상시연계용량 기준을 상향하기 위한 타당성을 검토하였으며, 배전선로의 분산 전원 상시연계용량 기준을 위한 상향(안)을 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전력기술부문
• /
• pp.339-341
• /
• 2006

Increasing interconnection of power plants in modern large electric power system has made power system dynamic studies much more complex. For effective analysis of the power system, model reduction and aggregation is required. In this paper, a new relation index is presented to identify the coherent generators in the large scale power system. In order to demonstrate the effects of this relation index, it is applied to a small scale power system of IEEE 39-bus test system and the simulation results are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.300-302
• /
• 2008

This paper will discuss the steps in building a wind farm and the modelling of AC power system for wind power generation. And take the JeJu island for an example, with its good wind power energy resource, the most important factor for a wind farm is a good power system interconnection to decrease the power loss including the transmission loss as less as possible. So in this paper, after the JEJU wind energy analysis, we will mainly discuss the development of the modelling on JEJU AC power system by using PSCAD. And also for using the real data of the wind power in the simulation, the modelling of the JeJu power system in 2011 will also be presented in this paper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.46_47
• /
• 2009

The West African Power Pool is currently developing the regional electricity market for its member states. As the basic design for the cross-border power trading system for the West African Power Pool, the step-by-step evolution, the Baseline System and the Fullscale System, is estimated. Along with the interconnection project between member countries, the various functions from the data acquisition and processing by the Baseline System to the interchange trading by the Fullscale System will be implemented gradually.

• Nuclear Engineering and Technology
• /
• 제27권3호
• /
• pp.358-373
• /
• 1995

중수로용 개량핵 연료집합체인 CANFLEX 핵연료다발의 CANDU-6 원자로 장전시 열수송계통에 대한 유동안정성이 분석되었다. CANFLEX 핵연료다발은 기존의 37개봉 핵연료다발과 원자로출력 및 압력강하 측면에서 거의 일치되며, 이로인해 수력적 거동이 양립하는 반면, CANFLEX핵연료다발은 기존의 37개봉 핵연료다발 보다 임계채널 출력이 증가하며, 반경방향 출력분포의 평탄화로 인해 균일한 엔탈피 분포를 확보할 수 있게 된다. CANFLEX 핵연료다발 및 출구모관들의 상호연결관에 대한 SOPHT 모델을 개발하였으며, 이 모델을 이용하여 CANFLEX 핵연료다발이 장전된 월성 1호기의 유동 안정성 거동이 해석되었다. 해석결과, 열수송계통의 출구모관들의 상호연결관이 없을 경우에는 기존의 37개봉 핵연료다발과 같이 유동이 불안정함을 보였으며, 출구모관들의 상호연결관이 있을 경우에는 정격출력의 $\pm$1% 내에서 안정함을 보였다. 따라서 CANFLEX 핵연료다발의 월성 1호기 장전시 열수송계통의 유동안정성 측면에서는 건전할 것으로 판단되었다.

• 한국유체기계학회 논문집
• /
• 제12권5호
• /
• pp.7-12
• /
• 2009

A nuclear fuel test loop(after below, FTL) is installed in the IRI of an irradiation hole in HANARO for testing the neutron irradiation characteristics and thermo hydraulic characteristics of a fuel loaded in a light water power reactor or a heavy water power reactor. There is an in-pile section(IPS) and an out-pile section(OPS) in this test loop. When HANARO is operated normally, the fuel loaded into the IPS has a nuclear reaction heat generated by a neutron irradiation. To remove the generated heat and to maintain the operation conditions of the test fuel, a main cooling water system(MCWS) is installed in the OPS of the FTL. The MCWS is composed of a main cooler, a pressurizer, two circulation pumps, a main heater, an interconnection pipe line and instruments. The interconnection pipeline is a closed loop which is connected to an inlet and an outlet of the IPS respectively. The MCWS is under a cold function test during a start-up period. This paper describes the system flow network analysis results of the flow control of a main cooling water system in the HANARO fuel test loop. It was confirmed through the results that the flow was met the system design requirements.

• 전기학회논문지
• /
• 제58권8호
• /
• pp.1551-1558
• /
• 2009

This paper proposes a new power conditioning system for the fuel cell power generation, which consists of a LLC resonant DC-DC converter and 3-phase inverter. The LLC resonant converter boosts the fuel cell voltage of 26-48V up to 400V, using the hard-switching boost converter and the high-frequency ZVS half-bridge converter. The operation of proposed power conditioning system was verified through simulations with PSCAD/EMTDC software. The feasibility of hardware implementation was verified through experimental works with a laboratory prototype, which was built with 1.2kW PEM fuel-cell stack, 1kW LLC resonant converter, and 3kW PWM inverter. The proposed system can be utilized to commercialize a real interconnection system for the fuel-cell power generation.

• KIEE International Transactions on Power Engineering
• /
• 제12A권2호
• /
• pp.39-44
• /
• 2002

This paper proposes some alternatives fur the power system linkage between South and North Korea, under the current situation. Since little information and data on the North-Korean power system are available so far, many efforts have been made to collect the required data for the North system as much as possible if available, and suppose, estimate and/or conjecture many things otherwise. Using these collected or assumed data, the characteristics of bus voltage and power flow are being studied to estimate the feasibility of the proposed linkage alternatives. To this end, many case studies have been made to examine the performance of acceptable interconnection alternatives.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2196-2201
• /
• 2011

According to the 5th national plan for electric power demand and supply, the 3rd HVDC link will be installed between KEPCO and Jeju Island system and go into operation in June, 2016. However, if it adopt LCC HVDC, Jeju power system could be in voltage instable condition. In order to solve the problem, we propose the application of VSC HVDC to the 3rd HVDC project. In the past, VSC HVDC has many disadvantages such as, inefficiency in conversion, size limit, and expensiveness, compared to LCC HVDC. Recently, the new technologies and the demand for renewable energy interconnection are leading a large growth in VSC HVDC market. In this paper, we will introduce the technical and market trends of VSC HVDC and power system stability analysis results for Jeju power system having LCC and VSC HVDCs.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.944-950
• /
• 2008

When small cogenerators are operated in connected with power system, there are many positive aspects such as the reduction of power plant construction, making a improvement of power security etc. At the same time, there are some negative effects or difficulties such as we should make sure of protective coordination, especially, Actually these are not fault, but it is likely to consider the current as the fault. This is one of major causes of malfunctions for protective relays in power distribution system which is including interconnection point. Thus, in this paper, We showed that the directional protection is necessary to the dispersed generation system which is including connection point. We also executed contingency analysis to find out the magnitude of fault current and direction which are classified by fault points, length of line and kinds of faults using ETAP power system analysis program.