• The Journal of Engineering Geology
• /
• v.23 no.1
• /
• pp.29-36
• /
• 2013

The application of appropriate rehabilitation methods can improve the efficiency of clogged wells and extend their life. In this paper, we study the feasibility of well cleaning using high-voltage pulsed discharge, in which electrical energy is used to produce impulsive pressure in water, in contrast to conventional methods that employ chemical or pneumatic energy sources. This technique utilizes the compressive shock wave generated by the expansive force of hot, dense plasma that is produced during a pulsed discharge in the gap between electrodes immersed in water. Compared with conventional techniques, this method is simple, and easy to handle and control. Using a capacitive pulsed power system with an electrical energy of 200 J, an impulsive pressure of 10.7 MPa is achieved at the position 6 cm away from the discharge gap. The amplitude of the impulsive pressure was easily controlled by adjusting the charging voltage of the capacitor and was almost linearly proportional to peak discharge current. The technique achieved good results in cleaning feasibility tests with mock-up specimens similar to clogged well screens.

• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.432-441
• /
• 2001

An automated on-line portable preconcentration-short column gas chromatograph was developed, which used preconcentrator using adsorption tube with Tenax-GR and Curie-point heating. The developed system operated with 3 steps of processing, preconcentration, thermal desorption, and analysis and cleaning, and could continued operating within 1~2 min cycle. The recoveries of preconcentrator for toluene was ranged between $94.7{\pm}6.6%$ and $103.8{\pm}3.1%$ with less than 7% of RSD. For benzene, toluene and xylene(BTX) standard gas test, IDL was 41, 49, $472ng/m^3$ benzene, toluene and o-xylene, respectively. The BTX mixture was analyzed within 30 sec with baseline separation by the system equipped with 4 m long capillary column. The deficiency of separation power caused by short column was solved by the control of sample injection volume and inlet/outlet pressure ratio. The automated portable preconcentration-short column gas chromatograph system was found to be useful for the continuous air monitoring of BTX at ppb levels in ambient air.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.2
• /
• pp.150-157
• /
• 2006

Spatially resolved remote identification and quantification of trace gases in the atmosphere is desirable in various fields of scientific research as well as in public security and industrial contexts. Environmental observations investigating causes, extent md consequences of air pollution are of fundamental interest. We present an Imaging-DOAS system, a ground based remote sensing instrument that allows spatially resolved mapping of atmospheric trace gases by a differential optical absorption spectroscopy(DOAS) with sun scattered light as the light source. A passive DOAS technique permits the identification and quantification of various gases, e.g., $NO_2,\;SO_2,\;and\;CH_2O$, from their differential absorption structures with high sensitivity. The Imaging-DOAS system consists of a scanning mirror, a focusing lens, a spectrometer, a 2-D CCD, ad the integral control software. An imaging spectrometer simultaneously acquires spectral information on the incident light in one spatial dimension(column) and sequentially scans the next spatial dimension with a motorized scanning mirror. The structure of the signal acquisition system is described in detail and the evaluation method is also briefly discussed. Applications of imaging of the $NO_2$ contents in the exhaust plumes from a power plant are presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.1
• /
• pp.68-78
• /
• 2013

In this paper, we propose an early spectrum sensing(ESS) as an advance preparation for radio-access trial, which enables multi-mode terminals to access the most appropriate radio-access system in a cloud-conceptual base station system where multiple radio access technologies(RATs) coexist. Prior to a random access to one of RATs, a multi-mode terminal conducts a spectrum sensing over entire frequency bands of whole RATs, then select the RAT with the lowest sensing power, that is likely to have the most available spectrum. Thus, an access failure caused by that the selected RAT has no available radio spectrum could be avoidable in advance. In computer simulation, we consider as various RATs as possible. First, circuit and packet systems are taken into consideration. In addition, the packet systems are classified according to the feasibility of carrier aggregation(CA). In case of terminal, three modes are considered with circuit-only, packet-only, and multi-mode. Subsequently, packet traffic is classified into real-time and non-real-time traffic with three different tolerable delay levels. The simulation includes a call process starting with a call generation and ending up with a resource allocation reflecting individual user's QoS requirements and evaluates the proposed scheme in terms of the successful access probability, system access time, system balancing factor and packet loss probability.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.35-39
• /
• 2003

The display technology on the retina is the key role in inspecting the condition of the patients. 2-dimensional retina image is widely used in the eye examination as of today. Recently, 3-dimensional retina image ones have been introduced to this area, but the quality of the image is not fully satisfied to the operator. For the purpose of developing 3-D retina imaging instrument, the optimization of a 3-D retina imaging system using Code-V tool was investigated in this thesis. He-Ne laser having the wavelength 632.8 nm was used to make a power source to detect the retina. Several lenses and mirrors installed on sledge which were developed to perform focus control on 3-D device were designed to make a beam focusing and direct line. Polygon scanner having 24 mirror facets and galvanometer making tilting movement were utilized to make a 2-D laser plane. Also, design of eye ball had been fulfilled to see the focus of the 2-D plane. Reflected ray from retina detected on the sensor array with the same path. All cognitive components were optimized for aberration correction in order to focus on retina. Results of optimization were compared to those of initial designed optics system. On the basis of above results, the result of third aberration has been corrected to stable values to the optical system. MTF evaluating the resolution of an image has been closely correlated to the diffraction limit and PSF indicating the strength distribution of an image has shown the SR value as 0.9998 having high performance. The possibility of new and powerful 3-D retina image instrument was verified by simulating each component of the instrument by Code-V.

• Journal of Distribution Science
• /
• v.13 no.6
• /
• pp.97-104
• /
• 2015

Purpose - The distribution of agricultural products is changing due to recent shifts in environmental free trade. Specifically, the competitiveness of domestic agricultural products has weakened as a result of the Korea-China Financial Trade Agreement. Agricultural producers are faced with increasing difficulties and organized production centers are growing in importance daily. To overcome this crisis, agricultural producer organizations are vying for environment-friendly agricultural certifications, Good Agriculture Practices (GAP) and Hazard Analysis and Critical Control Point (HACCP). In particular, as consumer demand for higher safety grows, farmers are increasing their certification rates. Therefore, this certification system is expected to help strengthen the competitiveness of agricultural producer organizations. Research design/data/methodology - Organized production centers are classified by certification. A survey was conducted with 91 organizations using factor analysis and logistic regression analysis for the examination. The factor analysis results are as follows. Raw material procurement, education·specialization, marketing, joint business, organizing ability, business management, effectiveness, certification, and larger organizations were classified as the nine types of factors. These factors affect the organized production centers and are used in the logistic regression analysis. The purpose of such research and analysis is to suggest a direction for future production center policies. Results - The basic statistical results are as follows: analysis of the producer organizations of 91 sites, average number of members per site of 1,624, and average sales of 25,961 million won. Additionally, the average income per farmer is 175 million won, and the pooling system rate is 53.5%. The factor analysis results are as follows. Factor 1 consists of contract cultivation, ongoing shipment, selection subdivision, traceability, and major retailer management. Factor 2 consists of manual cultivation, specialty selection, education program, and R&D. Factor 3 consists of advertising, various dealers, various sales strategies, and a unified sales counter. Factor 4 consists of agricultural materials co-purchase, policy support, co-shipment, and incentives. Factor 5 consists of the co-selection and pooling system. Factor 6 consists of co-branding and operating by the organization's article. Factor 7 consists of the buy-sell ratio and rate of operation of the agriculture promotion center. Factor 8 consists of bargaining power in volume and participation rate of farmer certification. Factor 9 consists of increasing new subscribers. The logistic regression analysis results are as follows. Considering the results by type of certification, the environment-friendly agricultural certification type and the GAP certification type have a (+) influence. GAP and HACCP certification types affecting the education·specialization factor have a (+) influence. Considering the results for each type of certification, the environment-friendly agricultural certification types on the effectiveness factor have (-) influence; the HACCP certification types on the organizing ability and effectiveness factor have a (-) influence. Conclusions - Agricultural producer organizations should develop plans as follows: The organizations need to secure education for agricultural production; increase the pooling system ratio for sustainable organizational development; and, finally, expand the number of agricultural producer organizations.

• Journal of radiological science and technology
• /
• v.18 no.2
• /
• pp.87-102
• /
• 1995

The education of radiologic technology began in the regular institute of higher education in Korea in 1963. Up to now from then, our education to bring up the radiologic technologists has developed greatly in quality and quantity, and now departments of radio-technology are founded in the 16 junior colleges in March, 1995. This study was done to verify the necessity and propriety to reform the education system of radiologic technology which was run as two or three year system of college curriculum for 32 years since 1963, and to search for the method to reform in the future. We got the following results from this research. 1. In the survey, on the desirable education year for radiologic technologists, 63.9 % of professors of department of radio-technology and 63.0 % of radiologic technologists chose the 4 year system, 27.9 % of professors and 34.6 % of radiologic technologists chose the 4 year system added to graduate school. 2. In the survey, on the future development of radiologic equipments and technique, 67.2 % of professors of department of radiologic technology and 86.4 % of radiologic technologists have a view of "revolutional development". Also, on the future tasks or roles of radiologic technologists 95.1% of professors and 94.9% of radiologic technologists have a view that "They will increase". 3. On the necessity of extension of education year to 4 years from 3 years, the factor is that development of medical technique and machinery and tools, advance of qualification of radiologic technologists, enlargement and specialization of the business of the radiologic technologists, ballance of education year with other medical sciences, international competitive power and cooperation of radiologic technology, and education continuation of the graduates of department of radiologic technology. 4. They suggested that in the 4 year curriculum of department of radiologic technology, clinical medicine, quality control of radiation and radiologic equipment, related subjects to the radiologic application and computer application should be enforced and clinical practice should be extended more. 5. On the device to found the 4 year college curriculum of radiologic technology, they suggested that first, 4 year curriculum should be founded through the variety of educational year, secondly, department of radiologic technology should be founded in the 4 year health sciences college, thirdly, educational continuation of the radiologic technologists should be systematized on the basis of life-long education.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.3
• /
• pp.51-61
• /
• 1989

Recently, the growth in the propulsion power and propeller size of typical energy saving ships has resulted in severe damages of the oil-lubricated stern tube bearing. Consequently, a more rational analytical method for the design of the shafting system is required. In this paper an analytical method applicable to the design of the oil-lubricated stern tube bearing and shafting system is presented. The method consists of the finite element analysis of the shafting system and the oil film hydrodynamics. The shafting system is modeled as a three-dimensional problem using beam elements taking account for the steady components of thrust, lateral forces and moments of the propeller as well as the elastic foundation effects. The oil film hydrodynamics is modeled as a two-dimensional problem. Equal and retangular elements employing hourglass control method are used for the construction of the oil film fluidity matrix. To search the quasi-static equilibrium position between the propeller shaft and the oil film, an optimization technique is employed. Some numerical results based on the proposed method are compared with some measured and numerical data available. They show acceptable agreements with the data.

• Science of Emotion and Sensibility
• /
• v.13 no.4
• /
• pp.703-710
• /
• 2010

In this study, a tactile stimulator was developed to resolve some problems from the previous version of the system such as system configuration, inappropriate stimulation control and additional problems. The developed tactile stimulator consists of control unit, drive unit and vibrator unit. The control unit was controlled by E-Prime software to generate appropriate vibration pulses. The drive unit supplies enough energy to the vibrator to generate effective stimulation pulses. The vibrator unit consists of small coin type vibrator and velcro, and was made to be attached at the hand easily. The developed tactile stimulator was designed by small-size, light-weight, low-power, simple-fabrication, max 35 channels and little delay time from instruction signal of E-Prime software to vibrator. The duration and magnitude of stimulation was controlled by 10 grades and the problems concerning stimulation control were compensated by wideband frequency ranges. Additionally, the electrical safety was ensured by low voltage operation. Vibrator was made to be attached on finger as well as on any part of the subject. Since this tactile stimulator is developed based on E-Prime software which is widely used in cognitive science, it is believed that this stimulator be suitable for the wide application of cognitive science study.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.318-330
• /
• 2009

A high heat flux test facility using a graphite heating panel was constructed and is presently in operation at Korea Atomic Energy Research Institute, which is called KoHLT-1. Its major purpose is to carry out a thermal cycle test to verify the integrity of a HIP (hot isostatic pressing) bonded Be mockups which were fabricated for developing HIP joining technology to bond different metals, i.e., Be-to-CuCrZr and CuCrZr-to-SS316L, for the ITER (International Thermonuclear Experimental Reactor) first wall. The KoHLT-1 consists of a graphite heating panel, a box-type test chamber with water-cooling jackets, an electrical DC power supply, a water-cooling system, an evacuation system, an He gas system, and some diagnostics, which are equipped in an authorized laboratory with a special ventilation system for the Be treatment. The graphite heater is placed between two mockups, and the gap distance between the heater and the mockup is adjusted to $2{\sim}3\;mm$. We designed and fabricated several graphite heating panels to have various heating areas depending on the tested mockups, and to have the electrical resistances of $0.2{\sim}0.5$ ohms during high temperature operation. The heater is connected to an electrical DC power supply of 100 V/400 A. The heat flux is easily controlled by the pre-programmed control system which consists of a personal computer and a multi function module. The heat fluxes on the two mockups are deduced from the flow rate and the coolant inlet/out temperatures by a calorimetric method. We have carried out the thermal cycle tests of various Be mockups, and the reliability of the KoHLT-1 for long time operation at a high heat flux was verified, and its broad applicability is promising.