• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.223-226
• /
• 2004

This paper describers the power demand and the voltage stability in power system. Especially the power demand on summer is more and more increase in korea. According to load quantity is increasing voltage is getting down. And power system becomes unstable. So this paper is prevent voltage down using to ULTC modeling which is a part in a transformer. Therefore our purpose is power system stability increasing as variable state like a load increasing or a fault. Then this paper is using IPLAN and PSS/E as analysis tool. PSS/E is very powerful engine on load flow analysis. And IPLAN is capable of using on variable program compiling with user.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권6호
• /
• pp.796-801
• /
• 2011

본 논문은 고도로 발전된 군사과학 기술의 영향과 급변하는 해양전장환경의 디지털화, 함정생존성 극대화를 위한 고출력 센서체계 등 고출력 에너지 사용 체계 플랫폼 실현을 위한 해군함정의 통합 동력 시스템 발전 경향을 분석하는데 초점을 두었다. 함정에서 전자기를 이용하는 항공기 출격 시스템, 200NM(370km) 이상 원거리에서 정밀타격이 가능한 전자기 포 등 고출력 에너지를 사용하는 각종 무기체계가 탑재되기 위해서는 추진동력을 포함한 함정에 공급되는 모든 동력이 단일화 되어야하는 통합 동력 시스템으로 변화하는 것이 가장 이상적이다. 선진국을 중심으로 통합 동력 시스템을 실현하기 위해서 기계식 추진시스템에서 하이브리드 및 완전전기추진시스템으로 변화하고 있는 추세이며 이러한 노력은 연료사용의 절감, 함정 탑재 장비의 고출력화, 함정 총 수명주기 비용 절감 등을 포함하고 있다.

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1289-1302
• /
• 2019

In this paper, an optimal allocation method of a hybrid active power filter in an active distribution network is designed based on the differential evolution algorithm to resolve the harmonic generation problem when a distributed generation system is connected to the grid. A distributed generation system model in the calculation of power flow is established. An improved back/forward sweep algorithm and a decoupling algorithm are proposed for fundamental power flow and harmonic power flow. On this basis, a multi-objective optimization allocation model of the location and capacity of a hybrid filter in an active distribution network is built, and an optimal allocation scheme of the hybrid active power filter based on the differential evolution algorithm is proposed. To verify the effect of the harmonic suppression of the designed scheme, simulation analysis in an IEEE-33 nodes model and an experimental analysis on a test platform of a microgrid are adopted.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.134-135
• /
• 2003

Abstract in case of the small scale power system separated from large scale power system N-2 contingency, the Over excitation, Under Frequency and Power swing Tripping Relay operate depending on unbalance Of Generation and Load. and then we studied and measured the angle and frequency deviation between generators. moreover, we compared real fault example with simulation results.

• 한국음향학회지
• /
• 제20권7호
• /
• pp.21-30
• /
• 2001

중고주파수 대역에서 구조물의 진동해석에 사용되는 새로운 기법인 파워흐름유한요소법과 음향방사문제를 해결하는데 사용되는 음향경계요소법을 이용하여 구조물의 진동해석에서 방사소음해석까지 일련의 과정이 순차적으로 이루어지는 해석시스템을 구축하였다. 평판으로 이루어진 임의의 형상 구조물의 진동해석을 수행하고, 이 때 얻어지는 표면에서의 에너지밀도를 음향해석을 위한 속도경계조건으로 활용하여 진동-소음해석을 수행하였다. 개발된 진동-소음해석 시스템의 검증을 위해 간단한 형상의 구조물을 모델링하여 상용화 패키지(SYSNOISE)의 해석결과와 비교하였으며 또한 여러 다양한 형상의 구조물에 대해서도 본 해석시스템을 적용하여 진동-소음해석을 수행하였다.

• 전기학회논문지
• /
• 제57권2호
• /
• pp.155-163
• /
• 2008

This paper presents a novel framework for analysis of power system wide-area blackout based on so called fault cascading scenarios. For a given power system operating state, "triggering" faults or a "seed faults" are chosen based on the probabilities estimated from the hazard rates. The fault probabilities reflect both the load and the weather conditions. Effects of hidden failures in protection systems are also reflected in establishing the fault propagation scenarios since they are one of the major causes for the wide-area blackouts. A tree type data structure called a PS-BEST(Power System Blackout Event Scenario Tree) is proposed for construction of the fault cascading scenarios, in which nodes represent various power system operating states and the arcs are the events causing transitions between the states. Arcs can be either probabilistic or deterministic. For a given initial fault, the total probability of leading to wide-area blackout is estimated by aggregating the individual probability of each fault sequence route leading to wide-area blackout. A case study is performed on the IEEE RTS-79(24 bus) system based on the fault data presented by the North American Electrical Reliability Council(NERC). Test results demonstrate the potentials and the effectiveness of the proposed technique for the future wide-area blackout analysis.

• 전기학회논문지
• /
• 제58권5호
• /
• pp.873-878
• /
• 2009

When the transmission lines are initially energized for power system restoration, the power system suffers the various overvoltages that can be classified as steady-state, transient, and dynamic overvoltages. For the accurate analyses of these overvoltages, many researchers utilize different simulation tools such as Power System Simulator for Engineering(PSS/E). Although PSS/E provides good solutions in steady-state and dynamic overvoltages, it is not suitable for transient overvoltages. Therefore, transient overvoltages are simulated by using Electro-Magnetic Transients Program(EMTP) developed for the analysis of transients in the power system. Recently, EMTP can be also used to simulate dynamic behavior of the system. In order to analyze the transient overvoltages with steady-state and dynamic overvoltages, the authors adopt EMTP as the simulation tool for the analysis of overvoltages. This paper presents the simulation results for the analyses of various overvoltages, and the possibility of EMTP to be used for these types of analyses.

• 전기학회논문지
• /
• 제64권6호
• /
• pp.878-884
• /
• 2015

In this paper, Power Management System(PMS) simulator for Liquid Nature Gas Carrier(LNGC) is developed. Major components of power system for LNGC, such as generator, diesel engine and governor, transformer, circuit breaker, and 3 phase loads models are built based on MATLAB/SIMULINK. With these designed major parts, PMS simulator modeling is carried out. Based on MATLAB/Graphical User Interface, PMS simulator control for LNGC, and Human Machine Interface for monitoring is designed. PMS simulator for LNGC carries out simulation according to sequence of characteristics analysis. By comparing results of predicted simulation for each sequence to that of characteristics analysis, the reliability of PMS simulator for LNGC will be verified.

• 대한전기학회논문지
• /
• 제32권12호
• /
• pp.435-440
• /
• 1983

The methods of forming the bus impedance matrix, which is mainly employed in fault analysis of power system, can be generally classified in catagories, (1) the one being the inverse matrix of bus admittance matrix, and (2) the other the bus impedance matrix succesive formation method by particular algorithms. The former method is theouetically elegant, but the formation and inverse of complex bus admittance matrix for large power system requires too much amounts of computer memory space and computing time. The latter method also requires too much memory space. Therefore, in this paper, an algorithm and computer program is introduced for the formation of a sparse bus impedance matrix which generates only the matching terms of the admittance matrix. So, this method can reduce the computer memory and computing time, and can be applied to fault analysis of large power system by small digital computer.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권5호
• /
• pp.573-580
• /
• 2014

The electrical reliability of the power generation and distribution system of Floating Liquefied Natural Gas vessels has been analyzed according to the operating modes using Electrical Transient Analysis Program in this paper. Electricity is used for the topside processes, cargo pumps for off-loading, thrusters for heading control and marine equipment. It is very important to improve the safety, efficiency, and stability of the electrical power system for successful operation. The voltage variation of the high and the low voltage bus shall be within the primitive limitation range at normal operation loads both in steady state and in the transient state. The power system was simulated and compared with class rule for design verification.