DOI QR코드

DOI QR Code

Electric power system design and analysis for FLNG vessel

  • Lee, Geunbo (Mechanical & Electric R&D Institute, Daewoo Shipbuilding & Marine Engineering Co., Ltd.) ;
  • Jang, Jaehyeoung (Mechanical & Electric R&D Institute, DSME) ;
  • Lyu, Sungkak (Mechanical & Electric R&D Institute, DSME) ;
  • Yu, Jinyeol (Mechanical & Electric R&D Institute, DSME)
  • Received : 2014.05.23
  • Accepted : 2014.06.12
  • Published : 2014.06.30

Abstract

The electrical reliability of the power generation and distribution system of Floating Liquefied Natural Gas vessels has been analyzed according to the operating modes using Electrical Transient Analysis Program in this paper. Electricity is used for the topside processes, cargo pumps for off-loading, thrusters for heading control and marine equipment. It is very important to improve the safety, efficiency, and stability of the electrical power system for successful operation. The voltage variation of the high and the low voltage bus shall be within the primitive limitation range at normal operation loads both in steady state and in the transient state. The power system was simulated and compared with class rule for design verification.

Keywords

References

  1. Arthur R. Bergen and Vijay Vittal, Power Systems Analysis, 2nd edition, Prentice Hall, 1986.
  2. Cameron Craig, "Integrated power system design for offshore energy vessels and deep water drilling rigs", IEEE Transactions on Industry Applications, vol. 48, no. 4, pp. 1251-1257, 2012. https://doi.org/10.1109/TIA.2012.2200091
  3. Timothy J. Mc Coy, "Trend in ship electric propulsion", IEEE, vol. 1, pp. 343-346, 2002.
  4. J. V. Amy and Jr., "Considerations in the design of naval electric power systems", IEEE Power Engineering Society Summer Meeting, vol. 1, pp. 330-335, 2002.
  5. A. Frank and Woodbury, "Electrical design considerations for drilling rigs", IEEE Transactions on Industry Applications, vol. 1A-12, no. 4, pp. 421-431, 1976.
  6. R. M. Calfo, J. A. Fulmer, and J. E. Tessaro, "Generators for use in electric marine ship propulsion systems", Proceedings of the IEEE Power Engineering Society, vol. 1, pp. 254-259, 2002.
  7. P. Patil and K. Porate, "Starting analysis of induction motor: A computer simulation by ETAP Power station", Proceedings of the International Conference on Emerging Trends in Engineering and Technology, pp. 494-499.
  8. Alf Kare Adnanes "Status and inventions in electrical power and thruster systems for drillships and semi-submersible rigs", Proceedings of the Dynamic Positioning Conference, pp. 28-30, 2004
  9. Won Jeon, Yong-Peel Wang, and Sang-Yong Jung, "Dynamic characteristic analysis at each operating condition for electric ship propulsion system", Journal of the Korean Society of Marine Engineering, vol. 32, no. 1, pp. 1296-1302, 2008. https://doi.org/10.5916/jkosme.2008.32.8.1296
  10. Won Jeon, Yong-Peel Wang, Jong-Hwa Jeong, Sung-Kak Lyu, and Sang-Yong Jung, "Power characteristic analysis of assumed short circuit instance of electric ship propulsion system", Journal of the Korean Society of Marine Engineering, vol. 32, no. 2, pp. 323-329, 2009. https://doi.org/10.5916/jkosme.2008.32.2.323

Cited by

  1. Prediction of boil-off gas and boil-off rate in cargo tank of NGH carrier vol.39, pp.10, 2015, https://doi.org/10.5916/jkosme.2015.39.10.1002
  2. A study on the development of digital AVR for ship and offshore vol.40, pp.1, 2016, https://doi.org/10.5916/jkosme.2016.40.1.39