• 한국자동차공학회논문집
• /
• 제16권4호
• /
• pp.135-142
• /
• 2008

Hydraulic power steering system has been adopted in seniority passenger and commercial vehicle system for an easy maneuverability and a smoother ride. In this study, hydraulic power steering system analysis model which includes hydraulics and mechanical sub-systems was developed using commercial software, AMESim in order to predict characteristics for various steering components. Each component which constructs system was modeled and verified by experimentally obtained characteristics curves of each components. The parameter sensitivity analysis such as valve opening area, torsional stiffness of torsion bar for system design are carried out by the analysis and experimental method. The predicted results by the development model were a good agreement with experimentally obtained results. The sensitivity investigation results rotary torque when changing an input shaft edge width, was most sensitive, to change in angle and slot width and supply flow of input shaft edge is not a lot sensitively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권4호
• /
• pp.484-496
• /
• 2009

The strengthened regulations for atmospheric emissions from ships like MARPOL Annex VI have caused a necessity of new, alternative power system in ships for the low pollutant emissions and the high energy efficiency. This paper attempts to investigate the configuration of SOFC/GT hybrid power system for LNG tanker taking into account the safety and to analyze the influence of design parameters on the system performance. The simulation results provide the basic data for the design and efficiency improvement of SOFC/GT hybrid system and indicate the guidelines for the safe system operation.

• 한국정보통신학회논문지
• /
• 제10권1호
• /
• pp.148-155
• /
• 2006

멀티미디어를 주요 처리 대상으로 하는 포터블 임베디드 시스템은 데이터에 대한 빈번한 메모리 접근으로 인하여 처리 속도가 저하되는 문제점에 직면하고 있으며, 이를 해결하기 위하여 임베디드 프로세서 설계 과정에서 데이터 선인출 기법을 채택하고 있다. 이 논문에서는 임베디드 시스템의 주요 성능 척도인 전력 소모 측면에서 데이터선인출이 시스템의 성능에 미치는 영향을 분석하였다. 이를 위하여 데이터 선인출 기법이 추가된 메모리 시스템의 전력 분석 모델을 제안하고, 응용 프로그램 수행에 소모되는 전력을 모의 측정하였다. 실험 결과, 데이터 선인출은 응용 프로그램의 처리 시간을 단축하는 반면 전력 소모를 크게 증가시키는 것을 확인하였다. 더불어 데이터 선인출을 채용한 임베디드 시스템에 대하여 처리 속도와 전력 소모를 함께 고려하는 성능 분석 모델을 제안하였다.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.232-241
• /
• 2010

This paper describes the development of robust contingency analysis program for Korean Energy Management System. The important function of contingency analysis is to determine the bus/branch model for contingency, and to calculate the state of the power network based on the network model and topology output. In the proposed method, the bus/branch models for contingencies are determined exactly using a fast linked-list method based on the application common model database. To calculate the state of the power system included contingency, the full-decoupled powerflow approach, the partial powerflow method for contingencies and the proposed contingency screening algorithm are also used to contingency analysis. To verify the performance of the developed processor, we performed a file-based test using several structured input data and online test using the database which resides on memory. The results of these comprehensive tests showed that the developed processors can accurately calculate the power system contingency state from online data and can be applied to Korea Power Exchange system.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1501-1510
• /
• 2014

Low voltage direct current (LVDC) distribution system is a suitable techno-economic candidate which can create an innovative solution for distribution network development with respect to rural electrification. This research focuses on the use of LVDC distribution system to replace some of KEPCO's existing traditional medium voltage alternating current (MVAC) distribution network for rural electrification in South Korea. Considering the technical and economic risks and benefits involved in such project, a comparative techno-economic analysis on the LVDC and the MVAC distribution networks is conducted using economic assessment method such as the net present value (NPV) on a discounted cash flow (DCF) basis as well as the sensitivity analysis technique. Each would play a role in an economic performance indicator and a measure of uncertainty and risk involved in the project. In this work, a simulation model and a computational tool are concurrently developed and employed to aid the techno-economic analysis, evaluation, and estimation of the various systems efficiency and/or performance.

• KEPCO Journal on Electric Power and Energy
• /
• 제5권4호
• /
• pp.275-286
• /
• 2019

본 논문은 DC (Direct Current) 배전망 혹은 DC 마이크로그리드 운영을 위한 실시간 DC 계통해석 응용프로그램의 개발에 대한 내용을 다룬다. 응용프로그램은 중앙 에너지 관리시스템(EMS: Energy Management System)에 탑재되어 운영자에게 실시간으로 운영 솔루션을 제공한다. DC 배전계통을 해석하기 위한 프로그램의 구성 및 시퀀스를 제안한다. 각 프로그램의 알고리즘과 AC 계통 프로세스와의 차이점을 분석한다. 한국전력공사 고창전력시험센터 내 DC 배전망 실증사이트를 소개하고, EMS 구축 내용을 기술한다. 개발된 DC 계통해석 응용프로그램을 실증 사이트 EMS에 탑재하여, 검증 시험을 수행한다. DC 배전망 전압 제어를 위한 시험 시나리오를 구성에 대해 논한다. 마지막으로 실증시험 결과 측정 데이터, 응용프로그램 결과 데이터를 PSCAD/EMTDC를 이용한 오프라인 시뮬레이션 결과값과 비교 분석하여 정합성을 검증한다.

• 전기학회논문지
• /
• 제62권10호
• /
• pp.1349-1353
• /
• 2013

The optimal analysis has objective functions, equality constraint functions and inequality functions. Objective functions may be used with inequality function, because occasionally variables are moved to non-analytic condition with calculating objective functions. But inequality constraint functions are very complicated problem in a optimal analysis. this paper suggest a method to solve inequality constraint functions.

• Journal of Power Electronics
• /
• 제11권5호
• /
• pp.734-742
• /
• 2011

In this paper a robust method is presented for the combined design of STATCOM and Power System Stabilizer (PSS) controllers in order to enhance the damping of the low frequency oscillations in power systems. The combined design problems among PSS and STATCOM internal ac and dc voltage controllers has been taken into consideration. The equations that describe the proposed system have been linearized and a Fuzzy Logic Controller (FLC) has been designed for the PSS. Then, the Particle Swarm Optimization technique (PSO) which has a strong ability to find the most optimistic results is employed to search for the optimal STATCOM controller parameters. The proposed controllers are evaluated on a single machine infinite bus power system with the STATCOM installed in the midpoint of the transmission line. The results analysis reveals that the combined design has an excellent capability in damping a power system's low frequency oscillations, and that it greatly enhances the dynamic stability of power systems. Moreover, a system performance analysis under different operating conditions and some performance indices studies show the effectiveness of the combined design.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.702-705
• /
• 2005

The wind power is known as the most promising future energy source to obtain the electricity. Induction generator is a simple energy conversion wit in the wind power generation system but it consumes the reactive power from the interconnected power system. Switched capacitor banks are normally used to compensate the reactive power, which bring about the transient overvoltage. This paper proposes a method for compensating the reactive power with STATCOM. A detail simulation model for analyzing the interaction between the wind power system and the commercial power system was developed using EMTDC software. The developed simulation model can be effectively utilized to plan the reactive power compensation for newly designed wind power system.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권6호
• /
• pp.309-315
• /
• 2004

The wind power is known as the most promising future energy source to obtain the electricity Induction generator is a simple energy conversion unit in the wind power generation system but it consumes the reactive power from the interconnected power system. Switched capacitor banks are normally used to compensate the reactive power, which bring about the transient overvoltage. This paper proposes a method for compensating the reactive power with STATCOM. A detail simulation model for analyzing the interaction between the wind power system and the commercial power system was developed using EMTDC software. The developed simulation model can be effectively utilized to plan the reactive power compensation for newly designed wind power system.