• International journal of advanced smart convergence
• /
• 제10권3호
• /
• pp.17-25
• /
• 2021

As a new paradigm in non-orthogonal multiple access (NOMA), correlated superposition coding (CSC) has gained an attention in the literature of NOMA, in contrast to standard independent superposition coding (ISC). In the conventional 3-user CSC scheme, it has been reported that the average allocated power can be reduced, owing to an introduced correlation between transmitted signals. Thus, this paper proposes a 3-user cross CSC scheme with purely-imaginary correlation coefficients. First, we derive the achievable data rates of the proposed 3-user cross CSC scheme, for each of the three users. Then, simulations demonstrate that for the proposed 3-user cross CSC scheme, the achievable data rates of the first and second users increase greatly and slightly, respectively, whereas the achievable data rate of the third user decreases little, compared to those of the conventional 3-user CSC scheme. In addition, we also show that the sum rate of the three users of the proposed 3-user cross CSC scheme is much larger than that of the three users of the conventional 3-user CSC scheme. As a result, the proposed 3-user cross CSC scheme could be a solution to the problem of the reduction of the average allocated total power in the conventional 3-user CSC scheme toward the fifth-generation (5G) NOMA mobile networks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권8호
• /
• pp.2783-2795
• /
• 2014

Orthogonal frequency division multiplexing with offset quadrature amplitude modulation (OFDM-OQAM) technique has drawn significant interests in recent years. However, most of the existing OFDM peak-to-average ratio (PAPR) reduction schemes cannot be used in the OFDM-OQAM system directly. In this paper, a modified scheme called overlapped segmental clipping (OS-clipping) is proposed to deal with the high PAPR problem specifically in the OFDM-OQAM system. For the proposed OS-clipping scheme, the input signals are divided into a number of overlapped segments and then the clipping operation is processed on each segment. Simulation results show that the modified scheme used in the OFDM-OQAM system can provide better performance than conventional clipping scheme directly used in the OFDM-OQAM system, and even outperforms conventional clipping scheme applied in the OFDM system.

• 한국통신학회논문지
• /
• 제29권5A호
• /
• pp.521-526
• /
• 2004

OFDM(Orthogonal Frequency Division Multiplexing)은 주파수 이용 효율을 높이고 고속의 데이터 전송이 가능하며 주파수 선택적 페이딩에 강한 전송 방식이지만, 다수 부반송파(sub-carrier)들의 중첩현상으로 인해 전송 신호의 PAPR(Peak to Average Power Ratio)이 크다는 문제점이 있다. 본 논문에서는 PAPR의 감소와 PAPR의 연산량 감소를 위해, PAPR간 분석을 통하여 상관기를 도입하는 사전-스크램블링 기법을 제안한다. 모의실험을 통해 제안한 기법과 기존의 PTS(Partial Transmit Sequence) 기법의 CCDF(Complementary Cumulative Distribution Function)간을 비교하여 복잡도를 크게 줄이면서도 PAPR를 낮출 수 있음을 보여준다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.15-16
• /
• 2006

In this paper, we propose an adaptive SLM scheme based on peak observation for PAPR reduction of OFDM signals. The proposed scheme is composed of three steps: peak scaling, sequence selection, and SLM procedures. In the first step, the peak signal samples in the IFFT outputs of the original input sequence are scaled down. In the second step, the sub-carrier positions where power difference between the original input sequence and the FFT outputs of the scaled signal is large, are identified. Then, the phase sequences which have the maximum number of phase-reversed sequence words only for these positions, are selected. Finally, only using the selected phase sequences, the generic SLM procedure is performed for the original input sequence. Simulation results reveal that the proposed adaptive SLM remarkably reduces the complexity in terms of IFFT and PAPR calculations than the conventional SLM, while maintaining the PAPR reduction performance.

• 한국통신학회논문지
• /
• 제32권12C호
• /
• pp.1142-1148
• /
• 2007

본 논문에서는 OFDM (Orthogonal Frequency Division Multiplexing) 시스템에서 전송 신호의 PAPR(Peak-to-Average Power Ratio)을 효과적으로 감소시키기 위한 피크 신호 관찰 기반의 적응적 SLM (Adaptive Selective Mapping; ASLM) 기법을 제안한다. 제안 기법은 기존 SLM 방법에서의 복잡도 문제를 개선하기 위해, 매 OFDM 심벌마다 IFFT (Inverse Fast Fourier Transform) 결과에 대한 피크 신호 조정, 피크 조정된 신호의 FFT 결과와 원래 OFDM 심벌간의 부반송파별 전력차 비교를 통한 직교 부호 선택, 선택된 직교 부호만을 이용한 전형적인 SLM 과정의 3단계로 구성된다. 모의실험 결과, 제안된 ASLM 기법은 우수한 PAPR 감소 성능을 유지하면서도 기존 SLM 방법에 비해 훨씬 적은 IFFT 연산 및 PAPR 계산 횟수를 요구함을 확인하였다.

• ETRI Journal
• /
• 제40권6호
• /
• pp.699-713
• /
• 2018

Orthogonal frequency division multiplexing (OFDM) has been the overwhelmingly prevalent choice for high-data-rate systems due to its superior advantages compared with other modulation techniques. In contrast, a high peak-to-average-power ratio (PAPR) is considered the fundamental obstacle in OFDM systems since it drives the system to suffer from in-band distortion and out-of-band radiation. The partial transmit sequence (PTS) technique is viewed as one of several strategies that have been suggested to diminish the high PAPR trend. The PTS relies upon dividing an input data sequence into a number of subblocks. Hence, three common types of the subblock segmentation methods have been adopted - interleaving (IL-PTS), adjacent (Ad-PTS), and pseudorandom (PR-PTS). In this study, a new type of subblock division scheme is proposed to improve the PAPR reduction capacity with a low computational complexity. The results indicate that the proposed scheme can enhance the PAPR reduction performance better than the IL-PTS and Ad-PTS schemes. Additionally, the computational complexity of the proposed scheme is lower than that of the PR-PTS and Ad-PTS schemes.

• 한국전자파학회논문지
• /
• 제13권9호
• /
• pp.889-897
• /
• 2002

본 논문에서는 OFDM(Orthogonal Frequency Division Multiplexing) 통신 시스템에서 발생하는 중요한 문제점인 PAPR(Peak to Average Power Ratio)을 저감하기 위하여 개선된 블록 코딩 방식을 제안하고 코딩 이득을 분석한다. 부반송파수가 N인 경우, 기존 블록 코딩 방식에서는 블록 인코더 1 개를 이용하지만, 제안된 블록 코딩 방식은 블록 인코더 2개를 이용한다. 이 방식은 기존 블록 코딩과 비교하여 동일한 PAPR 저감 능력을 가지면서도 코드율을 2배로 증가시켜서 스펙트럼 효율을 2배로 개선시킨다. 또한 코드 블록당 1 개의 오류가 정정된다는 가정 하에서 BER 성능 평가를 수행하였다.

• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1145-1153
• /
• 2014

It is well known that line switching operations like reclosing are able to cause transient power oscillations which can stress or damage turbine generators. This paper presents a reclosing scheme to reduce the shaft torsional torques of turbine generators by inserting an additional reactor. A novel method to determine optimal reactor capacity to minimize the torsional torque generated in a turbine generator is also proposed. In this paper, the turbine generator shaft is represented by a multi-mass model to measure torsional torques generated in the shaft between the turbine and the generator. Transmission systems based on actual data from Korea are modeled to verify the proposed scheme using ElectroMagnetic Transient Program (EMTP) software. The simulation results clearly show the effectiveness of the proposed scheme and torsional torque can be minimized by applying the proposed scheme.

• 한국생산제조학회지
• /
• 제5권2호
• /
• pp.29-37
• /
• 1996

High speed engines with high power are increasingly on demands and almost engines employ crankshafts Such problems as bending and torsional vibrations become the point at issue in crankshaft analysis and design. In this study to overcome the diffiiculty with the large amount of computation in finite element vibration analysis of a crankshaft, a reduction method based on influence coefficient and lumped parameter is presented. which reduces the computation amount effectively and can be used in vibrational analysis and design of any types of crankshafts Crank journal and pinparts are meodelled as elements with 6degrees of freedom per node. Crank web part is modelled using equivalent mass and stiffness matices . based up on lumped parameter and influence coefficient respectively to reduce total degrees of freedom considerablely. To confirm the scheme of the study the results are compared with the known data and they are coincident. Also a simple crankshaft is designed and manufactured for experiments. The calculated results using reduction method and the experimental results agree well The scheme of this study can be utilized in evaluation results agree well. The calculated result are compared with the known data and they are coincident. Also a simple crankshaft is designed and manufactured for experiments. The calculated results using reduction method and the experimental results agree well. The scheme of this study can be utilized in evaluation and development of high speed engine.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.230-233
• /
• 2003

Simulation model of induction type fixed speed wind power generator is developed. It is shown that the peak value of inrush current during start up changes according to the firing angle control strategy of soft starter. New proposed firing angle control scheme showed $25\%$ of reduction of peak current which results in smaller drop of gird voltage at the point of common coupling during start up.