• 대한임상검사과학회지
• /
• 제55권2호
• /
• pp.82-92
• /
• 2023

소변 침전물은 일반적으로 검사자가 원심분리한 소변을 현미경으로 검사한다. 따라서 소변 침전물 표본제작 과정의 차이가 검사 결과에 영향을 미치는지 확인했다. 요시험지 검사와 cobas u 701 analyzer에서 각각 백혈구 및 적혈구가 양성 반응으로 나온 107개의 신선한 검체를 수동 현미경검사를 위해 선택했다. 연구에서는 백혈구와 적혈구에 대해 자동분석기와 세 가지 수동 현미경검사법을 각각의 검사지침에 따라 평가하였다. 백혈구와 적혈구에 대한 cobas u 701 analyzer와 대한임상검사정도관리협회 간의 결정계수는 각각 r²=0.977과 r²=0.970이었다. 백혈구와 적혈구에 대한 cobas u 701 analyzer와 대한 임상검사정도관리협회 간의 일치도는 각각 74.8%, 77.6%였다. 대한임상검사정도관리협회 방법으로 표본을 제작하여 검사한 결과에서 자동분석기와 가장 좋은 상관성 및 일치도를 보였다. 결과적으로 소변 침전물 표본제작 방법의 차이는 침전물 농도에 영향을 미쳤으며 이는 HPF당 세포 등급과 수에 영향을 미쳤다. 따라서 보다 일관되고 정확한 검사 결과를 위해 소변 침전물 표본제작 과정을 표준화하는 것이 좋을 것으로 사료된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.463-464
• /
• 2011

Currently, different kinds of diagnosis and inspection technologies are applied to prevent the internal mechanical transformation of transformers. For example, examination of internal Partial Discharge of transformer, analysis of transformer oil gas, and measurement Frequency Response Analyzer(FRA) are used to diagnose defect. Especially, diagnosis technique through Frequency Response Analyzer(FRA) has been used and developed from 1960, when it was first introduced, till now to become an important tool to examine presence of defect and to prove quality of machines for the most electric machine producers electric power company in the world. However, diagnosis through FRA is still in introduction level in Korea and the application method for FRA is not established yet. For that reason, study about the application of domestic electric installation according to the FRA is needed. It is expected that the study play an important part in the prevention of defect due to the internal transformation of transformer by introducing measurement theory, providing measurement method, and analyzing application cases.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.270-272
• /
• 2004

At the water supply field, high voltage induction motor is main facility of a load equipment. The motor is often out of order and its noise, generated heat, loss etc occurred occasionally. especially, transmission motor for flux control generates an amount of the harmonics then have a bad influence upon the electric power system. In this study, to analyze the total harmonics distortion of the water supply field receiving high voltage, the harmonics measured and analyzed using the PQA(Power quality Analyzer) according to the electric power system and electrical load and the reduction method presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.296-298
• /
• 2003

At the water supply field, high voltage induction motor is main facility of a load equipment. The motor is often out of order and its noise, generated heat, loss etc occured occasionally. especially, transmission motor for flux control generates an amount of the harmonics then have a bad influence upon the electric power system. In this study, to analyze the total harmonics distortion of the water supply field receiving high voltage, the harmonics measured and analyzed using the PQA(Power Quality Analyzer) according to the electric power system and electrical load and the reduction method presented.

• 한국전자통신학회논문지
• /
• 제11권4호
• /
• pp.403-410
• /
• 2016

금속으로 이루어진 물질의 경우에는 고유하며 명백한 공진 주파수를 가지고 있다. 이러한 성질을 이용하여, 공장에서 만들어진 제품의 품질 테스트를 실행할 수 있다. 해당 제품에 충격을 가하고 이로부터 발생되는 소리나 진동의 주파수를 고성능의 장비를 이용하여 측정하게 된다. 범용 컴퓨터나 DSP 기반의 단독 시스템들이 이를 위해서 사용되며 이러한 장비들은 들고 다니기에 크기가 너무 크고 구축비용이 많이 든다. 본 논문에서는 TI의 MSP430 계열의 MCU를 이용하여 개발된 시스템에 대하여 소개하고자 한다. 초저전력의 MSP430 MCU들은 큰 용량의 배터리가 필요 없으므로 매우 작은 크기의 주파수 분석기를 제작하는 것이 가능하게 한다. 제안된 시스템은 검사원이 쉽게 장비를 가지고 다닐 수 있어야 하고 정확도를 다소 희생하더라도 작은 개발비용이 요구되는 환경에 사용될 수 있을 것이다. 제안된 시스템은 론치패드를 이용하여 개발되었으며, 인위적이거나 자연스런 소리의 주파수를 매우 높은 정확도로 판별 할 수 있음을 확인할 수 있었다.

• Journal of Welding and Joining
• /
• 제15권6호
• /
• pp.85-95
• /
• 1997

This study is to investigate the optimum conditions of Nd:YAG laser beam welding for Zircaloy-4 end cap closure by optical fiber transmission. Laser welding parameters which affect the penetration depth and bead width were experimentally examined using the various beam radius by the beam quality analyzer, joint geometries of end cap and the laser parameters which mean pulse width, repetition rate and pulse energy. Also, an optimum welding speed and the effect of assistant gas with varying the flow rate of He were investigated. We found that the laser average power for the end cap welding will be 230W and rotation speed must not exceed 8 RPM, the best position of focus using optical fiber with 600.mu.m will be 2 to 3mm below the surface of the material.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.263-266
• /
• 2001

본 연구는 전력품질을 평가할 수 있는 DSP기반 3상 전력품질 분석장치의 국산화 개발을 목표로 하고 있다. 전력분석 알고리즘은 시간영역의 간단한 평균전력이론을 사용하였고, 독립형 TMS320C31 DSP 보드에 의해 전력을 실시간으로 분석하여 LCD와 D/A 변환기로 출력하였다. 2PH의 모터와 그 구동장치 (인버터)의 전력품질을 분석함으로서 외국산 제품과 비교하여 그 성능과 정밀도 등을 검토하였다.

• 전자공학회지
• /
• 제30권9호
• /
• pp.1002-1011
• /
• 2003

In this paper, we introduce an integrated SoC front-end design & verification environment which can be practically used in the embedded 32-bit processor-core SoC VLSI design. Our introduced SoC design & verification environment integrates two most important flows, such as the RTL power estimation and code coverage analysis, with the functional verification (chip validation) flow which is used in the conventional simulation-based design. For this, we developed two simulation-based inhouse tools, RTL power estimator and code coverage analyzer, and used them to adopt them to our RTL design and to increase the design quality of that. Our integrated design environment also includes basic design and verification flows such as the gate-level functional verification with back annotation information and test vector capture & replay environment.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1621-1625
• /
• 2015

Power quality has always been a concern of power engineers. Certainly an argument can be successfully made that most parts of power engineering have the ultimate objective to improve power quality. AC motors were widely used in industrial and domestic applications. Generally, AC motors were of two types: Induction and Synchronous motors. In motor many parameters like different load cycling, switching, working in hot weather and unbalances creates harmonics which creates major reasons for temperature rise of the motors. Due to high peak value of voltage, harmonics can weaken insulation in cables, windings and capacitors and different electronic components. Higher value of harmonics increase the motor current and decrease the power factor which will reduce the life time of the motor and increase the overall rating of all electrical equipments. Harmonics reduction of all the motors in India will save more power. Coating of windings of the motor with nano fillers will reduce the amount of harmonics in the motor. Based on the previous project works, actions were taken to use the enamel filled with various nano fillers for the coating of the windings of the different AC motors. Ball mill method was used to convert the micro particles of Al₂O₃, SiO₂, TiO₂, ZrO₂ and ZnO into nano particles. SEM, TEM and XRD were used to augment the particle size of the powder. The synthesized nano powders were mixed with the enamel by using ultrasonic vibrator. Then the enamel mixed with the nano fillers was coated to the windings of the several AC motors. Harmonics were measured in terms of various indices like THD, VHD, CHD and DIN by using Harmonic analyzer. There are many other measures and indices to describe power quality, but none is applicable in all cases and in many instances, these indices may hide more than they show. Sometimes power quality indices were used as a basis of comparison and standardization. The efficiency of the motors was increased by 5 – 10 %. The thermal withstanding capacity of the motor was increased by 5º to 15º C. The harmonics of the motors were reduced by 10 – 50%.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권8호
• /
• pp.412-417
• /
• 2000

TV ghost interference can be described as passive interference by the conducting part of transmission lines. In order to survey this interference from large-sized overhead EHV (extra high voltage) transmission line, TV reception quality was measured in the vicinity of that before and after construction. Instrumentation system was composed of ghost analyzer, TV received field intensity meter, VHF/UHF antennas, TV monitor and so on. The system is installed inside the vehicle. TV field intensity and PDUR (Perceived Desired wave to Undersired wave Ratio) are measured to evaluate TV ghost by using the system and vehicle. As the results, the useful data, which can be used to evaluate the effect of TV ghost interference from transmission lines could be obtained. In this paper, it is shown that the range of TV ghost interference from transmission lines can vary according to the frequency of TV electromagnetic wave, an incidence angle to the line and the other conditiions. At present, we are making efforts to establish a PDUR guideline for transmission lines.