• 전기전자학회논문지
• /
• 제15권4호
• /
• pp.324-329
• /
• 2011

휴대 기기가 고기능화, 다기능화 됨에 따라 다양한 멀티미디어 기능이 요구되면서 배터리를 보다 장시간 이용하면서 더 높은 전력과 에너지가 요구되고 있다. 이에 따라 여러 개의 리튬이온 cell을 연결한 배터리팩이 많이 사용되고 있다. 2개 이상의 cell로 구성된 리튬이온 배터리를 안전하게 사용하기 위해서는 과전압 및 과전류, 고온으로 부터 보호해야 됨은 물론, 수명을 연장하기 위해서 각 cell의 전압을 같게 유지시켜주는 balancing 기능이 반드시 요구된다. 본 논문에서 제안한 IC는 모바일 기기뿐만 아니라 E-bike, 하이브리드 자동차, 전기 자동차 분야에도 적용 가능할 것으로 예상되며, 국내 PMIC 발전에 기여할 것으로 기대된다.

• 한국표면공학회지
• /
• 제49권2호
• /
• pp.211-217
• /
• 2016

Boride coating applied on steam turbine parts of power plants has provided good particle erosion resistance under temperature of $550^{\circ}C$, but it isn't able to protect the parts effectively any more in ultra super critical (USC) steam turbine which is being operated up to temperature of $650^{\circ}C$. To ensure stable durability for USC steam turbine parts, an alternative coating replacing boride coating should be developed. In this study, multi-component boride coatings containing elements such as chromium (Cr) and vanadium (V) were formed on base metal (B50A365B) using thermochemical treatment method called by pack cementation. The thermochemical treatments involve consecutive diffusion of boron(B) and Cr or/and V using pack powders containing diffusion element sources, activators and diluents. The top layer of Cr-boride coating is primarily consisted of $Cr_2B_3$ and $Cr_5B_3$, while that of V-boride coating is mostly consisted of $VB_2$ and $V_2B_3$. The (Cr,V)-boride coating is consisted of $Cr_2B_3$, $Cr_5B_3$ and $V_2B_3$ mostly. The top surfaces of 3 multi-component boride coatings show hardness of $3200-3400H_v$, which is much higher than that of boride, about $1600-2000H_v$. In 5 wt.% NaCl solution immersion tests, the multi-component boride coatings show much better corrosion resistance than boride coating.

• 전기학회논문지
• /
• 제66권12호
• /
• pp.1889-1894
• /
• 2017

Global automobile manufacturers are developing electric vehicles (EVs) to eliminate the pollutant emissions from internal combustion vehicles and to minimize fossil fuel consumptions for the future generations. However, EVs have a disadvantage of shorter traveling distance than that of conventional vehicles. To answer this shortfall, more batteries are installed in the EV to satisfy the consumer expectation for the driving range. However, as the energy capacity of the battery mounted in the EV increases, the amount of heat generated by each cell also increases. Naturally, a better battery thermal management system (BTMS) is required to control the temperature of the cells efficiently because the appropriate thermal environment of the cells greatly affects the power output from the battery pack. Typically, the BTMS is divided into an active and a passive system depending on the energy usage of the thermal management system. Heat exchange materials usually include gas and liquid, semiconductor devices and phase change material (PCM). In this study, an application of PCM for a BTMS was investigated to maintain an optimal battery operating temperature range by utilizing characteristics of a PCM, which can accumulate large amounts of latent heat. The system was modeled using Dymola from Dassault Systems, a multi-physics simulation tool. In order to compare the relative performance, the BTMS with the PCM and without the PCM were modeled and the same battery charge/discharge scenarios were simulated. Number of analysis were conducted to compare the battery cooling performance between the model with the aluminum case and PCM and the model with the aluminum case only.

• 대한한방종양학회지
• /
• 제4권1호
• /
• pp.89-110
• /
• 1998

Yookmijihwangtang has been widely used oriental herb prescriptions, which is healing some discuss that come from insufficiency of innate essence and deficiency of kidney Ki. The meaning of healing discusses tonification of insufficient innate essence and insufficient kidney Ki can be regarded as reinforcement of wholely power of keeping homeostasis, that is correlated with immuno-responsibility which protects subject from outer antigen to keep normal vital condition. This study was aimed to investigate correlative effects of Yookmijihwangtang water abstract on the RBC, WBC, blood CD4+ T helper cell count, blood testosterone, blood cAMP and blood cortisol. 40 Sprague-Dawley male rats were divided into 5 groups(Normal, Control, Sample I, Sample II, Sample III), 6 animals in every group. Normal group was not treated anything, control group was administrated normal saline in the same dosage of Sample I. 3 Sample groups were received some of Yookmijihwangtang water abstract at one time per 24 hours during 5 days in different dosage. Sample I(1/310pack/ml), Sample II(1/62pack/ml), Sample III(1/2.4pack/ml). After finishing treatment, all experimental subjects were killed for blood sample on RBC, WBC, blood CD4+ T helper cell count, spleen CD4+ T helper cell count, axillary lymph node CD4+ T helper cell count. blood cAMP, blood testosterone and blood cortisol. The results were as follows; RBC and WBC were increased in all sample groups. Blood CD4+ T helper cell count(CD4+ T cell count in the blood/whole lymphocyte count in the blood ${\times}100%$) was Normal $46.17{\pm}5.88$, Control $44.50{\pm}4.37$, Sample I $53.00{\pm}2.28$, Sample II $53.83{\pm}3.87$, Sample III $52.17{\pm}2.93$. By the 95% Duncan ANOVA all experimental groups(sample I, Sample II, Sample III) showed slight significant difference from Normal and Control. Blood cAMP(nmol/l) were Normal $1.12{\pm}0.17$, Control $1.16{\pm}0.32$, Sample I $0.46{\pm}0.07$, Sample II $0.44{\pm}0.04$, Sample III $0.54{\pm}0.04$. All experimental groups were singificantly different from both Normal and Control groups(p<0.05). Blood cortisol(nl/ml) were Normal $100.00{\pm}2.00$ Control $90.00{\pm}4.00$, Sample I $440.00{\pm}5.00$, Sample II $520.00{\pm}40.00$, Sample III $470.00{\pm}7.00$. Blood cortisol of all experimental groups were significantly increased(p<0.05). The results suggest that Yookmijihwangtang water abstract could be administrated to patients who have some diseases insufficient essence.

• 전력전자학회논문지
• /
• 제22권4호
• /
• pp.360-368
• /
• 2017

This paper proposes the 80-kW high-efficiency bidirectional hybrid SiC boost/buck converter using droop control for DC nano-grid. The proposed converter consists of four 20-kW modules to achieve fault tolerance, ease of thermal management, and reduced component stress. Each module is constructed as a cascaded structure of the two basic bi-directional converters, namely, interleaved boost and buck converters. A six-pack hybrid SiC intelligent power module (IPM) suitable for the proposed cascaded structure is adopted for high-efficiency and compactness. The proposed converter with hybrid switching method reduces the switching loss by minimizing switching of insulated gate bipolar transistor (IGBT). Each module control achieves smooth transfer from buck to boost operation and vice versa, since current controller switchover is not necessary. Furthermore, the proposed parallel control using DC droop with secondary control, enhances the current sharing accuracy while well regulating the DC bus voltage. A 20-kW prototype of the proposed converter has been developed and verified with experiments and indicates a 99.3% maximum efficiency and 98.8% rated efficiency.

• 한국전기전자재료학회논문지
• /
• 제18권8호
• /
• pp.772-778
• /
• 2005

In this paper, we designed the cylindrical type light source that had a electromagnetic principle of inductively coupled plasma, and measured its electrical-optical properties. Using the principle of transformer, electrically equivalent circuit of cylindrical type light source was analyzed. According to the parameters of electromagnetic induction which were diameter of coil with $0.3\~1.2\;mm{\Phi}$, number of turns with $4\~12$ turns, distance with $40\~120$ mm and RF power with $10\~150$ W, the electrical and optical properties were measured. When diameter of coil was $0.3\;mm{\Phi}$, number of turns was 8 turns and distance was 40 mm, the highest brightness of 29,730 $cd/m^2$ was shown with RF power 150 W. The relationship between electromagnetic induction and plasma discharges was shown by mode transition from E-mode to H-mode.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.640-643
• /
• 2004

유도결합형 플라즈마는 낮은 가스 압력에서도 고밀도의 플라즈마를 발생시키기 때문에 무전극 램프에 많이 적용되고 있다. 그리고 무전극 램프는 장 수명을 실현하고 고품질의 빛을 발생하기 때문에 앞으로 광범위하고 다양한 장소에 사용이 예상된다. 본 논문에서는 유도결합형 플라즈마를 이용한 아르곤 가스의 방전 특성 중에서 색 좌표 특성을 살펴보았다. 즉, 외부 안테나에 의해 발생된 13.56[MHz]의 RF Power를 방전관 내부로 전달하고, 아르곤 가스 압력과 RF Power 변화에 따른 아르곤 가스의 방전 특성을 측정하였다. 또한, 유도결합형 플라즈마를 방전시키기 위한 아르곤 가스의 압력은 1[mTorr]에서 100[mTorr], RF 전력은 10[W]에서 120[W]이며 이의 색 좌표 특성과 스펙트럼을 살펴보았다. 측정 결과 RF 출력이 증가하면 색 좌표의 x, y 값이 동시에 감소하였다. 아르곤 가스 압력이 증가하면 농도의 증가로 인해 발광이 어려웠으며, 색 좌표 특성은 압력이 증가하면서 y 값은 변화가 적었으나 x 값이 100[mTorr]일 크게 증가하는 현상이 나타났다.

• 한국자동차공학회논문집
• /
• 제22권3호
• /
• pp.60-67
• /
• 2014

The battery cells in lithium-ion battery pack assembled with high-capacity and high-power pouch cells, are commonly cooled with thin aluminum cooling plates in contact with the cells. For HEV/EV lithium-ion battery systems assembled with high-capacity, high-power pouch cells, the cells are commonly cooled with thin aluminum cooling plates in contact with the cells. Thin aluminum cooling plates are cooled by cold plate with coolant flow paths. In this study, the effect of the battery cooling system design including aluminum cooling plate thickness and various position of cold plate on the cooling performance are investigated by using finite element methods (FEM). Optimal cooling plate and cold plate design are proposed for improving the uniformity in temperature distributions as well as lowering average temperature for the cells with large capacities based on the simulation results.

• Journal of Power Electronics
• /
• 제19권4호
• /
• pp.858-868
• /
• 2019

With the widespread use of modern clean energy, lithium-ion batteries have become essential as a more reliable energy storage component in the energy Internet. However, due to the difference in monomers, some of the battery over-charge or over-discharge in battery packs restrict their use. Therefore, a novel multiphase interleaved converter for reducing the inconsistencies of the individual cells in a battery pack is proposed in this paper. Based on the multiphase converter branches connected to each lithium battery, this circuit realizes energy transferred from any cell(s) to any other cell(s) complementarily. This flexible interlaced converter is composed of an improved bi-directional Buck-Boost circuit that is presented with its own available control method. A simulation model based on the PNGV model of fundamental equalization is built with four cells in PSIM. Simulation and experimental results demonstrate that converter and its control achieve simple and fast equalization. Furthermore, a comparison of traditional methods and the HNFABC equalization is provided to show the performance of the converter and the control of lithium-based battery stacks.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.138.1-138.1
• /
• 2010

직접메탄올 연료전지는 액체 메탄올 저장의 이점을 가지고 있어 이동형 전원 등의 응용에 적합하며, 최근 군사용 통신 전원이나 노트북용 전원으로 사용하기 위한 연구가 활발히 진행 중이다. 그러나 연료전지 스스로는 초기 기동을 할 수 없고 부하의 응답 특성에 빠르게 대응하기 어렵다. 따라서 연료전지와 배터리를 하이브리드로 구성하면 이러한 문제를 해결할 수 있을 뿐만 아니라 연료전지에 대한 부하가 안정되어 수명 연장에도 긍정적인 효과를 얻을 수 있다. 본 연구에서는 직접메탄올 연료전지와 리튬 이차전지를 연계하여 하이브리드 시스템을 구성하고자한다. 시뮬레이션을 통해 채널 형상에 따른 유동 및 차압을 해석하였으며, Single Cell, Short Stack 및 Stack의 특성을 평가하였다. 또한 하이브리드 시스템은 연료전지 스택, 연료전지 운전 장치, 리튬 이차전지, BMS, PCM, DC/DC Converter 등을 구성하여 시스템의 특성 등을 관찰하고자한다.