• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.12
• /
• pp.51-59
• /
• 1993

A 4${\times}10^{19}cm^{3}$ carbon-doped base AlGaAs/GaAs HBY was grown using carbontetracholoride(CCl$_4$) by atmospheric pressure MOCVD. Abruptness of emitter-base junction was characterized by SIMS(secondary ion mass spectorscopy) and the doping concentration of base layer was confirmed by DXRD(double crystal X-ray diffractometry). Mesa-type HBTs were fabricated using wet etching and lift-off technique. The base sheet resistance of R$_{sheet}$=550${\Omega}$/square was measured using TLM(transmission line model) method. The fabricated transistor achieved a collector-base junction breakdown voltage of BV$_{CBO}$=25V and a critical collector current density of J$_{O}$=40kA/cm$^2$ at V$_{CE}$=2V. The 50$\times$100$\mu$$^2$ emitter transistor showed a common emitter DC current gain of h$_{FE}$=30 at a collector current density of JS1CT=5kA/cm$^2$ and a base current ideality factor of ηS1EBT=1.4. The high frequency characterization of 5$\times$50$\mu$m$^2$ emitter transistor was carried out by on-wafer S-parameter measurement at 0.1~18.1GHz. Current gain cutoff frequency of f$_{T}$=27GHz and maximum oscillation frequency of f$_{max}$=16GHz were obtained from the measured Sparameter and device parameters of small-signal lumped-element equivalent network were extracted using Libra software. The fabricated HBT was proved to be useful to high speed and power spplications.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.3
• /
• pp.279-287
• /
• 2010

Interior permanent magnet synchronous motor(IPMSM) adjustable speed drives offer significant advantages over induction motor drives in a wide variety of industrial applications such as high power density, high efficiency, improved dynamic performance and reliability. This paper proposes efficiency optimization control of IPMSM drive using adaptive fuzzy learning controller(AFLC). In order to optimize the efficiency the loss minimization algorithm is developed based on motor model and operating condition. The d-axis armature current is utilized to minimize the losses of the IPMSM in a closed loop vector control environment. The design of the current based on adaptive fuzzy control using model reference and the estimation of the speed based on neural network using ANN controller. The controllable electrical loss which consists of the copper loss and the iron loss can be minimized by the optimal control of the armature current. The minimization of loss is possible to realize efficiency optimization control for the proposed IPMSM. The optimal current can be decided according to the operating speed and the load conditions. This paper considers the design and implementation of novel technique of high performance speed control for IPMSM using AFLC. Also, this paper proposes speed control of IPMSM using AFLC1, current control of AFLC2 and AFLC3, and estimation of speed using ANN controller. The proposed control algorithm is applied to IPMSM drive system controlled AFLC, the operating characteristics controlled by efficiency optimization control are examined in detail.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.317-320
• /
• 2016

The NH-NongHyup network and servers were paralyzed in 2011, in the 2013 3.20 cyber attack happened and Classified documents of Korea Hydro & Nuclear Power Co. Ltd were leaked on December in 2015. All of them were conducted by a foreign country. These attacks were planned for a long time compared to the script kids attacks and the techniques used were very complex and sophisticated. However, no successful solution has been implemented to defend an APT attack thus far. Therefore, we will use big data analytics to analyze whether or not APT attack has occurred in order to defend against the manipulative attackers. This research is based on the data collected through ISAC monitoring among 3 hierarchical Korean defense system. First, we will introduce related research about big data analytics and machine learning. Then, we design two big data analytics models to detect an APT attack and evaluate the models' accuracy and other results. Lastly, we will present an effective response method to address a detected APT attack.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.5
• /
• pp.797-806
• /
• 1995

The Client-Server model is a computing technique that efficiently uses distributed resources via networks. But, generating an application using Client- Server model requires many different expertises to developers in comparison to that of using the centralized computing method. That is, and application developer must be familiar with network programming and GUI(Graphical User Interface) techniques in addition to conventional programming skills. Accordingly, the time and man power have been issued for building a Client-Server system. To alleviate these problem, the Client-Server applications development tools are needed To meet such a need, we developed a GUI based tool, called Hanuri/C, for generating Client-Server application programs. In comparison to existing Client-Server tools, Hanuri/C is reinforced Multimedia facilities, Hanuri/C is reinforced Multimedia facilities. Hanuri/C is considered as a front-end part of distributed system software. That is, Hanuri/C is a Client-Server tool similar to Forth Generation Language(4GL) supporting multimedia application on top of the Distributed Computing environment(DCE). In this paper, we present the design and implementation method of the middleware part of Hanuri/c.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.1900-1911
• /
• 2015

In this paper, we introduce backscatter communication for power-limited sensors to enable long-range transmission in wireless sensor networks, and envision a way to avoid doubly near-far problem in wireless-powered communication network (WPCN) with this technology. In backscatter based WPCN, users harvest energy from both the signal broadcasted by the hybrid access point and the carrier signal transmitted by the carrier emitter in the downlink, and then transmit their own information in a passive way via the reflection of the carrier signal using frequency-shift keying modulation in the uplink. We characterize the energy-free condition and the signal-to-noise ratio (SNR) outage zone in backscatter based WPCN. Further, we propose backscatter based harvest-then-transmit protocol to maximize the sum-throughput of the backscatter based WPCN by optimally allocating time for energy harvesting and information transmission. Numerical results demonstrate that the backscatter based WPCN increases significantly the transmission range and diminishes greatly the SNR outage zone.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4B
• /
• pp.200-207
• /
• 2007

Many P2P systems which are designed to implement large-scale data sharing have been introduced in internet recently. They exhibit interesting features like sell-configuration, sell-healing and complete decentralization, which make them appealing for deployment in ad hoc environments as well. This paper proposes an Gnutella-based P2P system that can operate efficiently in ad hoc networks. The objectives of this paper are to extend the overall system lifetime, to reduce overheads, and to provide enhanced performance. The proposed system uses an ultrapeer election scheme based on metric values and proactive distribution of ultrapeer information. According to the simulation results, the proposed system can provide better performance than Gnutella in terms of query success rate, query response time, overhead and residual battery power by utilizing network resources efficiently.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9C
• /
• pp.922-927
• /
• 2009

Utilization problem of the limited spectrum is the one of the most important issues in wireless communication systems. Cognitive radio technique which is finding and utilizing frequency holes is also one of those techniques. Specially, the spectrum sensing technique to detect the primary user signal is a core technology in cognitive radio area. In this paper, we propose the spectrum sensing algorithm using Bussgang theorem. The proposed algorithm calculates the statistical difference between the Gaussian noise and the primary user signal by applying Bussgang theorem to the received signal. The algorithm is not affected by noise uncertainty and can detect the primary user signal in the very low SNR environment. We evaluate the algorithm through computer simulations with 12 ATSC A/74 DTV signal captures based on IEEE 802.22 WRAN and formulate the sensing threshold for the proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.3
• /
• pp.275-281
• /
• 2014

Recently, the need for various underwater application systems targeting efficient resource exploration and aquatic ecosystem monitoring is rapidly increasing in littoral sea and inland waters. In this paper, we focus on the research and development of digital module of acoustic micro modem which can be used for underwater mobile communication systems and underwater sensor network systems. Specifically, a digital module of acoustic modem embedding digital signal processor is designed and implemented. On top of the developed hardware platform, physical layer frame generation and recovery and channel coding algorithms are mounted and tested in a water tank and a pond to verify its functionality and performance. According to experimental results, less than 1 percent of total computational power is consumed in the processing of frame control and convolutional code with the data rate of 1 kbps. Thus, the performance of micro modem could be improved by loading efficient baseband algorithms into the processor while maintaining the implemented hardware.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3B
• /
• pp.135-143
• /
• 2008

In this paper, we propose a QoS guaranteed and energy-efficient transmission scheme for Wireless Personal Area Networks (WPANs), which operate in conjunction with contention-based access protocols such as CSMA/CA. Energy consumption is one of the most important issues in WPAN systems, because WPAN devices are often required to operate under limited battery capacity. Furthermore, if the WPAN adopts a contention-based medium access protocol, the energy consumption problem becomes even more critical due to the collisions caused by independent channel access trials. Therefore, in this paper, we propose an algorithm that selects the optimum fragment size, modulation level, and transmission power, in order to minimize the energy consumption and guaranteethe QoS (Quality of Service) requirements, simultaneously. Our simulation results show that the proposed algorithm has better performance than the previous ones.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.4 s.36
• /
• pp.165-171
• /
• 2005

High speed computer, large scale storage device and high speed computer network are computing infrastructure which we can easily access to in these days. However, many computer simulations in natural or applied science such as molecular simulation require more computing power as well as larger scale of storage. Grid computing which is a next generation of distributed computing environment, is one of solution for the new requirements. Even though many researches have been going on Grid computing, those are oriented to communication interface and protocols, and middleware like globus tool kits[2, 3]. Therefore research on application level platform or application itself is yet premature and it makes real users be difficult to utilize Grid system for their research. In this paper, we suggest a new user environment and an abstract job model for simulation experiments on MGrid(Molecular Simulation Grid). It will make users be able to utilize Grid resources efficiently and reliably.