• Ocean Systems Engineering
• /
• 제3권3호
• /
• pp.203-217
• /
• 2013

A PTO (power-take-off) mechanism by using relative heave motions between a floating buoy and its inner mass (magnet or amateur) is suggested. The inner power take-off system is characterized by a mass with linear stiffness and damping. A vertical truncated cylinder is selected as a buoy and a special station-keeping system is proposed to minimize pitch motions while not affecting heave motions. By numerical examples, it is seen that the maximum power can actually be obtained at the optimal spring and damper condition, as predicted by the developed WEC(wave energy converter) theory. Then, based on the developed theory, several design strategies are proposed to further enhance the maximum PTO, which includes the intentional mismatching among heave natural frequency of the buoy, natural frequency of the inner dynamic system, and peak frequency of input wave spectrum. By using the intentional mismatching strategy, the generated power is actually increased and the required damping value is significantly reduced, which is a big advantage in designing the proposed WEC with practical inner LEG (linear electric generator) system.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1200-1208
• /
• 2016

Planar electromagnetic interference (EMI) filter has significant engineering significance to power electronic system integration and miniaturization. However, the value of differential mode capacitance cannot meet the demand of noise suppression because of the size limit of ceramics. In this case, the EMI filter of novel multilayers is recommended to address this issue. A novel integrated structure of EMI filter based on multilayer ceramic is proposed in this study. The inductance and capacitance of the new structure can be designed separately, which is an advantage in manufacturing. Insertion loss is measured more closely to the actual situation in this study, which is different from the condition where source and load impedances are both 50 Ω. In the process of designing a novel EMI filter, noise impedance is considered. Moreover, the prototype is created and applied to a small switching power supply, which verifies the effectiveness of the developed EMI filter.

• 한국전자파학회논문지
• /
• 제21권2호
• /
• pp.188-193
• /
• 2010

본 논문은 관통형 비아와 전송 선로 사이의 임피던스 불연속과 P/G(Power/Ground) 면 사이에서 발생되는 공진으로 인한 클록 신호 응답 성능 저하가 관통형 비아(through-hole via)가 있는 4층 PCB(Printed Circuit Boards)의 SI(Signal Integrity) 성능에 악영향을 미치는 것을 이론적으로 분석하였다. 비아 구조의 집중소자 모델링을 이용한 반사 전압 계산과 TDR(Time Domain Reflector) 시뮬레이션 결과 비교로 관통형 비아와 전송 선로 사이의 임피던스 불연속 최소화 시킬 수 있고, 관통형 비아 위치를 이용한 P/G면 공진 상쇄의 시뮬레이션 결과로 클록 신호 응답 성능을 향상시킬 수 있음을 확인하였다.

• 한국전자파학회논문지
• /
• 제22권11호
• /
• pp.1047-1053
• /
• 2011

본 논문에서는 근거리에서 효율 향상을 위해 적응 주파수 제어 회로를 갖는 HF-대역 무선 전력 전송 시스템을 제안하였다. 일반적으로 무선 전력 전송 시스템은 공진기 간의 이격 거리가 가까워짐에 따라 결합 계수가 변하게 되며, 이는 반사 임피던스에 의한 임피던스 부정합을 발생시킨다. 본 연구에서 제안한 방식은 전압제어 발진기의 공진 주파수를 이격 거리에 따라 자동으로 가변함으로써 공진기 간의 거리가 가까워 임피던스 부정합이 큰 경우에도 전송 효율의 저하를 막을 수 있다. 적응 주파수 제어 회로는 방향성 결합기, 검파기 및 루프 필터로 구성된다. 본 논문에서 제안한 방법의 유용성을 입증하기 위하여 HF-대역에서 동작하는 30${\times}$30 $cm^2$ 크기의 루프 안테나를 갖는 무선 전력 전송 시스템을 설계하여 측정한 결과 근거리에서 효율이 개선됨을 확인하였다.

• 한국해양환경ㆍ에너지학회지
• /
• 제17권2호
• /
• pp.146-152
• /
• 2014

선형발전기와 연성된 원통형 부이의 수직운동으로부터 파랑에너지를 추출하는 파력발전장치의 설계과정을 소개하였다. 최대 파워는 최적조건($c_{PTO}=b_T$, ${\omega}={\omega}_N$)에서 발생하며, 공진조건시 부이의 수직운동 고유주파수와 속도스펙트럼의 피크 주파수를 일치시키지 않고 의도적으로 고유주파수를 15% 크게 설정하면 추출파워의 최대값을 더욱 높일 수 있다. 이러한 방법을 통하여 추출 파워의 증가와 함께 부이의 흘수를 낮추고 동시에 PTO 감쇠력을 줄일 수 있기 때문에 발전장치 제작 비용을 낮출 수 있는 부수적인 효과를 얻을 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2986-2988
• /
• 2005

To improve the reliability of power-line communication systems, the measurement and analysis has been proceeded in many power-line channel environments. In spite of the wired channel, power line channel has many multi-paths that are changing with load-variation, line-interconnection, impedance mismatching and so on. We accordingly need an analysis method based on the multi-path channel impulse response. Recently, a method to describe the homogeneous Power-line network has been published[1]. In this paper the modified method that can describe both the homogeneous and non -homogeneous power-line network has presented.

• 전자공학회논문지A
• /
• 제31A권5호
• /
• pp.50-57
• /
• 1994

The analysis of the two-tone intermodulation distortion of multistage two-ports with gain and mismatching losses is presented with simplified two-port analyses and statistical viewpoint. The uncertainty obtained from unknown phase angles of the intermodulation distortion signals to the system designer is reduced using stochastic process, hence improving the accuracy of the solution. Based on the dc power dependance of third-order intercept point of each stage, the new efficient method for improving the total intercept point is also suggested with only the relation of dc power and available power gain criteria. Experimental verification on specific amplifiers used for cellular mobile communication comparing predicted and measured intercept points for various power conditions is presented.

• 전기학회논문지P
• /
• 제54권3호
• /
• pp.134-140
• /
• 2005

Most of the loads in industrial power distribution systems are usually balanced and connected to three power systems. However, in the user power distribution systems, partial loads are single & three phase and unbalanced, generating voltage unbalance by the impedance mismatching. Voltage unbalance has detrimental effects on three-phase induction motors, including over heating, line-current unbalance, derating, torque pulsation, low efficiency, etc. This paper presents a scheme on operation states of a three-phase induction motor under the unbalanced voltages with harmonics components. Three-phase voltages applied to the stator winding of the studied induction motor are controlled by respectively adjusting not only fundamental but also harmonics components. Harmonic components at the voltage unbalanced factor(VUF) of the three-phase source voltages can then be examined the different values of VUF on machine's operation characteristics.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권1호
• /
• pp.56-60
• /
• 2005

In the power-line communication(PLC) systems, the power line is a wired medium. However, the power line channel has the multi-path fading characteristics like the wireless channel in the wireless communication systems because it has the signal reflection and divergence by the impedance mismatching between many branch lines and loads. So the analysis of the multi-path characteristics is very important, and it has been doing by the several measurement methods for the impulse response between the transmitter and the receiver. PN sequence method has originally been used as a wideband impulse response measurement mettled for wireless channel, but it is recently being applied to not only the wireless channel but also the wired channel like the power line channel. This method is more useful and effective for the long distance communication channel like the medium voltage power distribution line with the multi-paths[1]. In this thesis, we have measured impulse response for the medium voltage power distribution line channel by the wideband measurement method using PN sequence, analytically studied the measured data and presented the results.

• 대한전자공학회논문지TC
• /
• 제47권2호
• /
• pp.80-85
• /
• 2010

본 논문에서는 EER(Envelope Elimination and Restoration)구조를 응용하여 전력 증폭기의 효율을 극대화 하였으며, EER 구조의 취약점인 선형성을 메타구조를 이용하여 개선하였다. 고효율을 얻기 위해 class-F급 전력 증폭기를 설계하였으며 포락선 검파기를 이용하여 전력 증폭기의 구동 전력을 조절하였다. 또한, 정합 회로의 비정합에 의한 고조파 성분들을 대역통과 필터의 특성을 갖는 CRLH 메타구조를 이용하여 제거함으로써 높은 선형성을 얻었다. 본 논문에서 제안한 EER 구조를 응용한 전력 증폭기 구조는 일반 전력 증폭기에 비해 PAE(Power Added Efficiency)가 5.93 % 개선되었고, 3차 IMD가 12.83 dB 이상 개선되었다.