• KIEE International Transactions on Power Engineering
• /
• 제5A권1호
• /
• pp.31-39
• /
• 2005

This paper illustrates a tie line constrained equivalent assisting generator (TEAG) model considering forced outage rates of transmission systems for reliability evaluation of interconnected power systems. Interconnections between power systems can provide improved levels of reliability. It is expected that the TEAG model developed in this paper will prove useful in the solution to problems related to the effect of transmission system uncertainties in the reliability evaluation of interconnected power systems. It is important that interconnection between power systems can provide the improved levels of reliability. Therefore, It is expected that the TEAG model developed in this study will provide some solution among many problems for interconnected power systems as an optimal tie line capacity and a connected point between assisting systems and assisted system. The characteristics and validity of this developed TEAG considering transmission systems are introduced by case study of three IEEE MRTS interconnected.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.1301-1304
• /
• 2005

본 논문에서는 전력선 통신 시스템에서 급격하게 변화는 임피던스 때문에 발생하는 에러율을 개선하기 위하여 제안한 D급 증폭 구동 회로를 적용하였다. 전력선 모뎀에, 일반적인 구동회로인 전압 구동 회로와 전류 구동 회로를 제작하여 실험을 하였다. 그리고 같은 전력선 모뎀에 본 논문에서 제안한 D급 증폭 회로를 이용한 구동 회로를 사용하여 실험을 하였다. 실험 결과 본 논문에서 설계한 구동 회로가 전력선 통신에서 임피던스 변화에 대하여 다른 구동 회로보다 성능이 우수함을 보였다.

• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1168-1177
• /
• 2015

This paper presents a scheme to improve the line current distortion of power factor corrector (PFC) topology at the zero crossing point using a predictive control algorithm in both the continuous conduction mode (CCM) and discontinuous conduction mode (DCM). The line current in single-phase PFC topology is distorted at the zero crossing point of the input AC voltage because of the characteristic of the general proportional integral (PI) current controller. This distortion degrades the line current quality, such as the total harmonic distortion (THD) and the power factor (PF). Given the optimal duty cycle calculated by estimating the next state current in both the CCM and DCM, the proposed predictive control algorithm has a fast dynamic response and accuracy unlike the conventional PI current control method. These advantages of the proposed algorithm lower the line current distortion of PFC topology. The proposed method is verified through PSIM simulations and experimental results with 1.5 kW bridgeless PFC (BLPFC) topology.

• 대한전자공학회논문지TC
• /
• 제41권11호
• /
• pp.25-32
• /
• 2004

본 논문에서는 전력선통신에서 발생하는 잡음에 대해서 DSSS을 적용할 수 있는 가능성을 분석했다. 이 잡음은 4가지가 있는데, 이들 잡음을 분석하기 위해서 특성에 따라서 실제로 전력선에서 발생하는 잡음원을 만들었다. 이들 잡음모델을 대상으로 DSSS을 적용한 BPSK의 BER 성능을 DSSS을 적용하지 않는 BPSK의 경우와 비교해서 모의실험하고 분석했다. 그 결과, DSSS을 적용한 BPSK의 경우가 DSSS을 적용하지 않는 BPSK의 경우에 비해서 8 dB 개선되었음을 알 수 있었다.

• 한국안전학회지
• /
• 제33권5호
• /
• pp.164-169
• /
• 2018

A detailed fatigue evaluation procedure was developed to mitigate the excessive conservativeness of the conventional environmental fatigue evaluation method for the pressurizer spray line elbow of domestic new nuclear power plants. The pressurizer spray line is made of austenitic stainless steel, which is relatively sensitive to the environmentally assisted fatigue, and has a low degree of design margin in terms of environmentally assisted fatigue due to the thermal stratification phenomenon on the pipe cross section as a whole or locally. In this study, to meet the environmental fatigue design requirements of the pressurizer spray line elbow, the new environmental fatigue evaluation has been performed, which used the ASME Code NB-3200-based detailed fatigue analysis and the environmental fatigue correction factor instead of the existing NB-3600 evaluation method. As a result, the design requirements for environmentally assisted fatigue were met in all parts of the pressurizer spray line elbow including the fatigue weakened zones by thermal stratification.

• 한국인터넷방송통신학회논문지
• /
• 제12권1호
• /
• pp.217-223
• /
• 2012

다양한 산업 분야와 일상생활에서 시각동기 문제는 매우 중요하다. 일상생활에서 사용하는 전자제품 중에서 보다 정확한 시각정보를 활용 한다면 좀 더 정확한 동작을 수행하게 할 수 있다. 전력선을 통해 전원을 공급받아 동작하는 제품의 경우, 전력선을 통해 정확한 시각 정보를 전송 받을 수 있다면 시각동기 문제를 좀더 쉽게 해결할 수 있다. 본 논문에서는 GPS위성으로부터 수신한 시각정보를 전력선을 통해서 각 단말에 전송하는 전력선 방송 시스템을 개발하였다. 또한 시각 소스를 GPS에 동기된 스마트폰을 이용할 수 있도록 하였으며, 전력선 모뎀 기술이 갖는 장거리 전송의 어려움을 해결하기 위한 중계 방식을 제안하고 중계 시스템을 구현하였다. 본 논문에서 개발된 시스템은 시각 정보의 전송 거리를 확장하여 광역 PLB(Power Line Broadcasting) 시각방송을 구현하였다. 또한 본 논문에서는 중계 시스템의 성능을 평가하여 그 유용성을 확인하였다.

• 전기학회논문지
• /
• 제57권12호
• /
• pp.2263-2268
• /
• 2008

We investigated the malfunction and destruction characteristics of microcontroller devices under high power electromagnetic(HPEM) wave by magnetron. HPEM was rated at a microwave output of 0 to 1,000 W, at a frequency of 2,450${\pm}$50 MHz and was radiated from the open-ended standard rectangular waveguide(WR-340) to free space. The influence of different reset-, clock-, data-, and power supply-line lengths has been tested. The variation of the line length was done with flat cables. The susceptibility of the tested microcontroller devices was in general much influenced by clock-, reset-, and power supply-line length, little influenced by data-line length. Further the line length was increased, the malfunction threshold was decreased as expected, because more energy couples to the devices. The surfaces of the destroyed microcontroller devices were removed and the chip conditions were investigated with microscope. The microscopic analysis of the damaged devices showed component and bondwire destructions such as breakthroughs and melting due to thermal effects. The obtained results are expected to provide fundamental data for interpreting the combined mechanism of microcontroller devices in an intentional microwave environment.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권6호
• /
• pp.409-416
• /
• 2005

For broadband high-data-rate power line communication with the allocated frequency bandwidth from 2 to 30 MHz on medium voltage (MV) distribution power lines, a signal coupling unit is developed. The coupling unit is composed of a coupling capacitor for coupling communication signal, a drain coil, and an impedance matching part. The coupling capacitor made of ceramic capacitor is designed for transmission property of better than 1 dB in the frequency range. The drain coil is used for preventing low frequency high voltage from junction of medium voltage power line in case that a coupling capacitor is not working properly any more. Also, using ferrite core, a novel broadband impedance matching transformer is developed. A complete coupling unit with a coupling capacitor, a drain coil, and a matching transformer is housed by polymer for good isolation and distinguishing from high voltage electric facilities. Each is fabricated and its frequency behavior is tested. Finally, complete signal couplers are equipped in a MV PLC test bed and their performance are measured. The measurement shows that the coupling capacitor works excellently.

• 한국전자통신학회논문지
• /
• 제14권1호
• /
• pp.127-136
• /
• 2019

전관방송 시스템은 위급상황 및 비상상황에서도 누구나 손쉬운 조작과 운영, 그리고 장비의 안정적 동작이 우선시되어야 한다. 본 논문에서는 전력선 통신 기반 전관방송 시스템 사용자에게 편리성과 효율성을 제공하기 위해, 전관방송 시스템의 PLC(Power Line Communication) 제어기와 UI(User Interface) 그리고 PLC 제어기와 PLC 스피커 간의 통신을 제어하기 위한 펌웨어를 구현하였고, 사용자가 컴퓨터 화면에서 손쉽게 사용할 수 있도록 UI 소프트웨어를 개발하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1569-1571
• /
• 1999

In this work, we have performed the application experiment for real distribution line to diagnose the underground power cables using DC voltage decay measurement system. We have also performed the Isothermal Relaxation Current test for the same distribution line using KDA-l. We could confirmed possibility of grading the insulation aging state of underground power cables. Therefore, we conclude that it is possible to apply DC voltage decay method to the real distribution line.