• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.274-274
• /
• 2016

일반적으로 수공구조물의 설계지점은 홍수량 자료가 없는 경우가 대부분이다. 이러한 미계측유역의 홍수빈도를 추정하기 위한 여러방법들 중 지수홍수법을 이용한 지역홍수빈도분석을 본 연구에서 수행하였다. 특히, 지수홍수법의 주요인자 중 하나인 평균홍수량의 지역화를 위한 방법으로 홍수량과 유역면적과의 관계가 멱함수 법칙(power law)을 따른다는 가정에 따른 경험관계를 도출하였다. 보다 세밀한 분석을 위해 대상유역 전체를 하나의 그룹, 공간 근접성에 따른 추가적인 세부적인 그룹으로 분류하여 각각의 결과를 분석하였다. 연구결과에 의하면, 미계측 지점의 홍수량 추정시에는 인근의 계측지역 즉, 직상하류 유역의 비유량의 관계를 사용하는 것이 타당할 것으로 판단된다. 또한 미계측 유역에 대한 홍수빈도를 추론하기 위해서는 지역홍수빈도해석 자체도 중요하지만, 지역의 세밀한 구분과 그에 따른 지역화 경험관계 개발이 중요함을 확인할 수 있었다.

• The Korean Journal of Rheology
• /
• v.11 no.2
• /
• pp.143-152
• /
• 1999

Using a Rheometrics Fluids Spectrometer(RFS II), the steady shear flow and the small-amplitude dynamic viscoelastic properties of three kinds of semi-solid food materials(mayonnaise, tomato ketchup, and wasabi) have been measured over a wide range of shear rates and angular frequencies. The shear rate dependence of steady flow behavior and the angular frequency dependence of dynamic viscoelastic behavior were reported from the experimentally measured data. In addition, some viscoplastic flow models with a yield stress term were employed to make a quantitative evaluation of the steady flow behavior, and the applicability of these models was also examined in detail. Furthermore, the correlations between steady shear flow(nonlinear behavior) and dynamic viscoelastic(linear behavior)properties were discussed using the modified power-law flow equations. Main results obtained from this study can be summarized as follows : (1) Semi-solid food materials are regarded as viscoplastic fluids having a finite magnitude of yield stress, and their flow behavior shows shear-thinning characteristics, exhibiting a decrease in steady flow viscosity with increasing shear rate. (2) The Herschel-Bulkley, Mizrahi-Berk, and Heinz-Casson models are all applicable to describe the steady flow behavior of semi-solid food materials. Among these models, the Heinz-Casson model has the best validity. (3) Semi-solid food materials show a stronger shear-thinning behavior at shear rate region higher than a critical shear rate where a more progressive structure breakdown takes place. (4) Both the storage and loss moduli are increased with increasing angular frequency, but they have a slight dependence on angular frequency. The elastic behavior is dominant to the viscous behavior over a wide range of angular frequencies. (5) All of the steady flow, dynamic, and complex viscosities are well satisfied with the power-law model behavior. The relationships between steady shear flow and dynamic viscoelastic properties can well be described by the modified forms of the power-law flow equations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.7
• /
• pp.754-764
• /
• 2016

To understand and analyze SNS(Social Network Service) two important classes of networks, small-world and scale-free networks have gained a lot of research interests. In this study, a generalized network generation method is developed, which can produce small-world network, scale-free network, or network with the properties of both small-world and scale-free by controlling two input parameters. By tuning one parameter we can represent the small-world property and by tuning the other one we can represent both scale-free and small-world properties. For the network measures to represent small-world and scale-free properties clustering coefficient, average shortest path distance and power-law property are used. Using the model proposed in this study we can have more clear understanding about relationships between small-world network and scale-free network. Using numerical examples we have verified the effects of two parameters on clustering coefficient, average shortest path distance and power-law property. Through this investigation it can be shown that small-world network, scale-free network or both can be generated by tuning two input parameters properly.

• Journal of Legislation Research
• /
• no.41
• /
• pp.261-302
• /
• 2011

A lien is the right to possession the thing until receiving repayment of its bonds in some cases that the property of other person or the occupant for marketable securities receive the bond that has occurred on that property or marketable securities. This has own purpose to break 'principle of creditor equality' to protect especially the bond of the subject occupant in terms of justice. These lien on our civil law come according to the law in prepared certain requirements. However, an incomplete real rights granted by way of security that does not have a preferential performance right or seniority on the exchange value of the object suffer from the problems a lot in the real estate auction process because of the feature that is not announced in the register unlike the mortgage. In addition, the lien of real estate is not lapsed in an auction process. There is no preferential performance righ in a positive law as providing that can oppose to the buyer(a successful bidder) until received repayment the secured bond price to be compliant with the lien(Civil Case Execution Law the 91st clause of Article 5). However, as asserted the super preferential performance righ to a buyer in real terms, acts as primary cause of breaking unexpected loss and according unfair law relation to a senior mortgagee and seizor, etc. and the principles of the creditors equality to the persons concerned in other words, the principles of justice. All of these issues are the establishment of the lien and theory conflict on the effects. In spite of the fluctuations of a real right about real estate is announced as a registration by the current law, only the lien come into unclear announcement means for possession. In addition, Civil Case Execution Law argument is caused by the adoption abernahmeprinzip about the lien (Civil Case Execution Law the 91st clause of Article 5). Therefore, this paper was examined briefly the significance and purpose, history and law-making examples of each country and the valid requirements and effect of the lien that is basic principle of law about the lien system above all. And then, it will be reviewed the improvement plan for de lege ferenda to improve the issues about this after reviewing the objection, theory and judicial precedent about opposing power and preferential performance right of the lien in the real estaKey Words : Lien, Oppose Power, Mortgage right, Preferential Performance right, Seizure, Real Estate Auction, Lien who can not Opposing against Successful Bidder, Lien who can Oppose against Successful Bidder, Possessionte auction that is a fundamental problem on requirement and effect of the lien.

• Water for future
• /
• v.28 no.5
• /
• pp.129-140
• /
• 1995

In this study we derived steady-state relationships between surface saturation area and subsurface outflow, and between surface saturation area and soil moisture storage through numerical experiments with Richards equation on a hillslope. Numerical experiments analyzed the sensitivity of topographic and soil hydraulic properties on steady-state relationships between surface saturation area and subsurface outflow. And the power law for the extent of surface saturation area was determined as a function of subsurface outflow or soil moisture storage.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.9 s.252
• /
• pp.1034-1040
• /
• 2006

Due to the need of increasing thermal efficiency, supercritical pressure and temperature have been utilized in power plants. It is well known that 9Cr1Mo steel is suitable fer use in power plants operating at supercritical conditions. Therefore, to ensure the safety and the soundness of the power plant, creep characterization of the steel is important. In this study, the creep characterization of the gCr1Mo steel using small punch creep(SP-Creep) test has been described. The applied load and the central displacement of the specimen in SP-Creep test have been converted to bearing stress and strain of uc, respectively. The converted SP-Creep curves clearly showed the typical three-stage behavior of creep. The steady-state creep rate and the rupture time of the steel logarithmically changed with the bearing stress and satisfied the Power law relationship. Furthermore, the Larson-Miller parameter of the SP-Creep test agreed with that of the tensile creep test. From the comparison with low Cr-Mo steels, the creep characteristics of 9Cr1Mo steel proved to be superior. Thus, it can be confirmed that the 9Cr1Mo steel is suitable for supercritical power plant.

• The Korean Journal of Air & Space Law and Policy
• /
• v.19 no.2
• /
• pp.179-197
• /
• 2004

As we observed in Irag war, air force power is integral to military operations owing to its promptness and accuracy. In this regard, strong air force power has a deterrent effect on a war. Meanwhile, as aviation industry is a key-future industry, the importance of the industry in our economy is significantly growing. Therefore, to maximize a national interest in utilizing limited aviation resources, it is necessary to establish a new system in which civil aviation and military aviation system is closely related and consolidated. Thus, our task is to find a way to enhance civil aviation industry to the extent of guaranteeing effective military operations. At the same time, civil aviation resources shall be effectively utilized for the military purposes in the event of a war. Ibis task should be carried out in a way to further efficiency for both civil and military aviation system, rather than resulting in conflicts between two syste

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5930-5938
• /
• 2013

The sigmoid functionally graded mateiral(S-FGM) theory is reformulated using the nonlocal elatictiry of Erigen. The equation of equilibrium of the nonlocal elasticity are derived. This theory has ability to capture the both small scale effects and sigmoid function in terms of the volume fraction of the constituents for material properties through the plate thickness. Navier's method has been used to solve the governing equations for all edges simply supported boundary conditions. Numerical solutions of biaxial buckling of nano-scale plates are presented using this theory to illustrate the effects of nonlocal theory and power law index of sigmoid function on buckling load. The relations between nonlocal and local theories are discussed by numerical results. Further, effects of (i) power law index, (ii) length, (iii) nonlocal parameter, (iv) aspect ratio and (v) mode number on nondimensional biaxial buckling load are studied. To validate the present solutions, the reference solutions are discussed.

• Journal of Radiation Protection and Research
• /
• v.17 no.1
• /
• pp.21-30
• /
• 1992

The frequencies of KCCH cyclotron neutron (30 cGy/min) or $^{60}Co\;{\gamma}-rays$ (210 cGy/min)-induced asymmetrical interchanges (dicentrics and centric rings) and acentric fragments (deletion) at several doses were measured in the normal human peripheral blood lymphocytes Chromosome aberrations were scored at the first nitosis after stimulation with phytohemagglutinin. The neutron and y-ray data were analysed on linear, power-law, quadratic and linear-quadratic model . When the dicentrics and centric rings of ${\gamma}-rays$ datas were pooled and fitted to these model, good fits were obtained to power-law $[Y=(5.81{\pm}1.96){\times}10^6D^{1.93+0.06},\; P=0.931]$, quadratic $[Y=(3.91{\pm}0.09){\times}10^{-6}D^2,\;P=0.972]$ an linear-Quadrati model $[Y=(6.55{\pm}6.83){\times}10^{-5}D+(3.72{\pm}0.22){\times}10^{-6}D^2\; P=0.922]$, except for linear model (P=0.067) As in the case of neutron data, the best fit was obtained to the linear model $(Y=(6.12{\pm}0.17){\times}10^{-3}\;D-0.22,\;P=0.987]$ and good fits were obtained to power-law$[Y=(5.36{\pm}3.02) {\times}10^{-4}D^{1.42+0.11},\; P=0.601]$ and linear-quadratic model$[Y=(2.43{\pm}0.70){\times}10^{-3}D+(1.21{\pm}0.39){\times}10^{-7}D^2$, \;P=0.415], except for quadratic model (P<0.005). The relative biological effectiveness (RBE) of neutron compared with y-ray was estimated by best fitting model. In the asymmetrical interchanges range between 0.1 and 1.5 per cell, the RBE was found to be $2.714{\pm}0.408$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1987.07a
• /
• pp.89-97
• /
• 1987

가로흐름에 방류되는 연직평면부력젤의 젤중심선경로와 온도분포를 실험자료와 기본방정식으로부터 유도된 적분식에 의하여 해석한다. 기본방정식으로부터 적분식의 유도는 상사법칙과 특성길이를 도입하여 연직상향 및 수평방향흐름영역에 대한 차원해석을 하였고, 실험은 속도비(R=Wo/Ua)와 방류밀도Froude수를 변화시키면서 각각에 따른 젤중심선경로와 온도분포를 획득하였다. 속도비 R과 방류밀도Froude수 Fo에 따라 부력젤의 흐름특성은 달라지게 되며, 초기조건(운동량및 부력)에관계없이 부력젤은 항상 운동량지배영역이 존재함을 알 수 있었고 적분식에 의한 역법칙(power law)과 실험 자료는 대체로 일치된결과를 나타내었다.