• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.496-500
• /
• 2001

There are two ways in the output voltage control method in PWM inverter. One is the double loop voltage control composed of inner current control loop and outer voltage control loop. Because it shows fast response and low steady state error, utilized in many application. The Other is single loop voltage control method composed of voltage control loop only. It's characteristics shows lower performance in case of high output impedance than double loop voltage control. But in low output impedance, it shows good control performance in all load range than double loop control. In this paper, single loop voltage control rule and gain was developed analytically, and these were verified through computer simulation and experiment.

• International Journal of Computer Science & Network Security
• /
• 제21권7호
• /
• pp.341-349
• /
• 2021

Many emerging mobile ad-hoc network application communications are group-oriented. Multicast supports group-oriented applications efficiently, particularly in a mobile environment that has a limited bandwidth and limited power. Energy effectiveness along with safety are 2 key problem in MANET design. Within this paper, MANET is presented with a stable, energy-efficient clustering technique. In this proposed work advanced clustering in the networks with ticket ID cluster manager (TID-CMGR) has formed in MANET. The proposed routing scheme makes secure networking the shortest route possible. In this article, we propose a Cluster manager approach based on TICKET-ID to address energy consumption issues and reduce CH workload. TID-CMGR includes two mechanism including ticket ID controller, ticketing pool, route planning and other components. The CA (cluster agent) shall control and supervise the functions of nodes and inform to TID-CMGR. The CH conducts and transfers packets to the network nodes. As the CH energy level is depleted, CA elects the corresponding node with elevated energy values, and all new and old operations are simultaneously stored by CA at this time. A simulation trial for 20 to 100 nodes was performed to show the proposed scheme performance. The suggested approach is used to do experimental work using the NS- simulator. TIDCMGR is compared with TID BRM and PSO to calculate the utility of the work proposed. The assessment shows that the proposed TICKET-ID scheme achieves 90 percent more than other current systems.

• 한국항해항만학회지
• /
• 제47권2호
• /
• pp.85-92
• /
• 2023

The hardware of an LED lighting control system for coastal lighting at coastal pier entrance consists of a power supply unit, an AVR control unit, a CLCD output unit, an LED control unit, a scenario selection switch unit, and an operation speed display unit. It is made of an 8-channel. The CPU used ATmega128 and the FET was used to control the current signal. To operate the CPU, DC 12V was converted to DC 5V using a regulator 7805. A heat sink was used to remove heat generated in the FET. By connecting the load LED module to the manufactured 8-channel LED lighting control system, the operation was confirmed through various production scenarios. In addition, a control system was designed to show the most suitable color for the atmosphere of the coastal pier according to the input value of temperature and illumination using a fuzzy control system. Computer simulation was then conducted. Results confirmed that fuzzy control did not need to store many data inputs due to characteristics of artificial intelligence and that it could efficiently represent many output values with simple fuzzy rules.

• 한국화재소방학회논문지
• /
• 제24권6호
• /
• pp.61-68
• /
• 2010

이 논문에서는 주택화재 예방을 위해 10년 이상 전지의 교체 없이 지속적으로 유지가 되도록 회로 설계된 저소비 전력의 단독경보형 정온식감지기의 연구.개발 경험을 기술하고자 한다. 구현된 감지기는 우선하여 일본에 적용되도록 개발한 것이다. 국내에서는 주택용 화재감지기를 위한 별도의 규정이 적용되지 않고 단독경보형감지기의 규정으로 적용되고 있어서 별도의 규정을 두고 있는 일본의 사례가 인용되어 있다. 이를 위해 먼저 국내의 법적 현황, KFI 규격과 JFEII에 대한 시험 규격 비교 검토가 수행되었다. 감지기의 경보는 버저와 표시 LED를 통해 표현된다. 감지기 구현 시에 소비전류를 줄이기 위해 대기전력이 극히 적은 MCU를 적용하고, MCU의 슬립상태와 감시상태의 동작을 적절히 제어하여 평균적인 소비 전류를 최소화하도록 하였다. 정온식감지기에서 온도 검출을 위해 응답성이 빠른 서미스터를 적용하고, 감지기의 자동시험기능과 경보정지 기능도 설계에 반영하였다. 전류소비를 줄이기 위해 고려해야 할 부분에 대해서 언급이 되어 있으며, 주요한 부분에 대한 전자회로를 나타내었다. 구현 사례로서 감지기의 서미스터 동작 특성 분석 결과가 나타나 있고, 구현된 감지기의 소비 전류 측정값과 상용 전지 방전특성의 분석을 통해 10년 이상 동안 전지의 교환 없이 적용 가능함을 보여주고 있다.

• 한국산학기술학회논문지
• /
• 제13권11호
• /
• pp.5403-5408
• /
• 2012

본 논문에서는 신체 성분 분석을 위한 다주파수 생체전기 임피던스 분석법에 대하여 소개하고 이를 기반으로 다주파수 생체전기 임피던스 분석 시스템을 구현하고 그 과정 및 결과를 제시하였다. 시스템의 구성요소들을 다주파수 교류 신호 발생부, 위상 신호 검출부, 전압 신호 검출부, 제어부, 입 출력부, 전극부, 전원부로 구분하여 설명하고, 구체적으로 구현 기법을 소개하였다. 체성분 데이터의 임상적 의의를 검토하고자 세계 최고 수준의 기술을 적용하여 높은 재현도와 고정밀도의 데이터를 제공하는 전문가용 체성분 분석기로 측정한 데이터와 비교 검토하고 두 측정치간의 상관관계를 구한 결과 시스템에 의한 체성분 분석은 상당히 높은 재현성을 나타낸다고 할 수 있다.

• 반도체디스플레이기술학회지
• /
• 제12권2호
• /
• pp.13-17
• /
• 2013

In lighting system where several large-area organic light-emitting diode (OLED) lighting panels are involved, panel aging may appear differently from each other, resulting in a falling-off in lighting quality. To achieve uniform light output across large-area OLED lighting panels, we have employed an optical feedback circuit. Light output from each OLED panel is monitored by the optical feedback circuit that consists of a photodiode, I-V converter, 10-bit analogdigital converter (ADC), and comparator. A photodiode generates current by detecting OLED light from one side of the glass substrate (i.e., edge emission). Namely, the target luminance from the emission area (bottom emission) of OLED panels is monitored by current generated from the photodiode mounted on a glass edge. To this end, we need to establish a mapping table between the ADC value and the luminance of bottom emission. The reference ADC value corresponds to the target luminance of OLED panels. If the ADC value is lower or higher than the reference one (i.e., when the luminance of OLED panel is lower or higher than its target luminance), a micro controller unit (MCU) adjusts the pulse width modulation (PWM) used for the control of the power supplied to OLED panels in such a way that the ADC value obtained from optical feedback is the same as the reference one. As such, the target luminance of each individual OLED panel is unchanged. With the optical feedback circuit included in the lighting system, we have observed only 2% difference in relative intensity of neighboring OLED panels.

• Smart Structures and Systems
• /
• 제21권3호
• /
• pp.257-262
• /
• 2018

Vibrational problems in the domestic Small Horizontal Axis Wind Turbines (SHAWT) are due to flap wise vibrations caused by varying wind velocities acting perpendicular to its blade surface. It has been reported that monitoring the structural health of the turbine blades requires special attention as they are key elements of a wind power generation, and account for 15-20% of the total turbine cost. If this vibration problem is taken care, the SHAWT can be made as commercial success. In this work, Shape Memory Alloy (SMA) wires made of Nitinol (Ni-Ti) alloys are embedded into the Glass Fibre Reinforced Polymer (GFRP) wind turbine blade in order to reduce the flapwise vibrations. Experimental study of Nitinol (Ni-Ti) wire characteristics has been done and relationship between different parameters like current, displacement, time and temperature has been established. When the wind turbine blades are subjected to varying wind velocity, flapwise vibration occurs which has to be controlled continuously, otherwise the blade will be damaged due to the resonance. Therefore, in order to control these flapwise vibrations actively, a non-linear current controller unit was developed and fabricated, which provides actuation force required for active vibration control in smart blade. Experimental analysis was performed on conventional GFRP and smart blade, depicted a 20% increase in natural frequency and 20% reduction in amplitude of vibration. With addition of active vibration control unit, the smart blade showed 61% reduction in amplitude of vibration.

• 한국의류산업학회지
• /
• 제23권2호
• /
• pp.273-289
• /
• 2021

This study aimed to examine the appearance of heated clothing in relation to fashion trends by analyzing constructive components of clothing using product images and actual products. A total of 91 images of domestic and foreign heated clothing products were collected, and a product analysis conducted with six parameters of item classification, namely, concept and image, silhouette, color, number of heating elements, and heating parts. In addition, an in-depth analysis was carried out with 11 products among them, while focusing on further detailed components of the design and heating system. As a result, the overall exterior design of domestic products has been changed from outdoor clothing to daily clothing reflecting the current design trend. Compared with domestic products, foreign products showed a diverse assortment and a greater number of heating regions per individual item of clothing. The current heating system commonly consists of a heating element, power source, controller board, and wires, although the existence and type of switches differed from product to product. To develop a more efficiently heated clothing to expand the market, the design, ease of use, safety, consumer preference, heating functionality, and durability should be considered. Along with design recommendations for future heated clothing, this study also provides a practical guide to the technical aspects of the design of the components of heated clothing.

• 대한전자공학회논문지TE
• /
• 제42권1호
• /
• pp.29-34
• /
• 2005

권선형 유도전동기는 기동시에 충분히 큰 저항을 외부에서 삽입하여 기동전류를 작게하는 동시에 기동토크를 크게 할 수 있다. 또한, 유도전동기의 각 기동방식중에서 가장 우수한 시동특성을 가지고 있으며 크레인, 시멘트공장 등 중부하 시동이 요구되는 경우 널리 사용되고 있다. 권선형 유도전동기 드라이브 시스템의 전류, 토크, 위치 및 속도 등의 제어를 위하여 일반적으로 산업현장에서는 PI 제어기가 많이 적용되고 있다. 그러나 이러한 시스템은 센서 부착시 여러가지 환경적 제약으로 인한 전체시스템의 성능 저하를 가져올 수 있어 이를 개선하기 위한 센서리스 벡터제어가 활발히 연구되고 있다. 본 논문은 권선형 유도전동기의 센서리스 벡터제어를 위해 MRAS 기법을 적용하였고, 기존 MRAS에 의한 유도전동기 속도 센서리스 제어시 발생하는 저항 값의 변화에 따른 저속 영역에서의 속도 특성 악영향을 개선키 위해 권선형 유도전동기의 고정자 저항과 회전자 저항 값을 추정하는 제어 알고리즘을 추가하여 시스템의 동특성 개선을 시도하였다. 제안된 기법의 타당성 및 유효성을 컴퓨터 시뮬레이션으로 확인하였다.

• Journal of Power Electronics
• /
• 제3권2호
• /
• pp.99-114
• /
• 2003

This paper presents a feasible development on a highly accurate quick response adjustable speed drive implementation fur general purpose induction motor which operates on the basis of sensorless slip frequency type vector controlled sine-wave PWM inverter with an automatic tuning machine parameter estimation schemes. In the first place, the sensorless vector control theory on the three-phase voltage source-fed inverter induction motor drive system is developed in slip frequency based vector control principle. In particular, the essential procedure and considerations to measure and estimate the exact stator and rotor circuit parameters of general purpose induction motor are discussed under its operating conditions. The speed regulation characteristics of induction motor operated by the three-phase voltage-fed type current controlled PWM inverter using IGBT's is illustrated and evaluated fur machine parameter variations under the actual conditions of low frequency and high frequency operations for the load torque. In the second place, the variable speed induction motor drive system, employing sensorless vector control scheme which is based on three -phase high frequency carrier PWM inverter with automatic toning estimation schemes of the temperature -dependent and -independent machine circuit parameters, is practically implemented using DSP-based controller. Finally, the dynamic speed response performances for largely changed load torque disturbances as well as steady state speed vs. torque characteristics of this induction motor control implementation are illustrated and discussed from an experimental point of view.