• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1332-1335
• /
• 2003

This paper presents the enhancement of oxygen transfer efficiency using the vibrating intravascular lung assist device (VIVLAD) in in-vitro experiments for patients having chronic respiratory problems. The test section was a cylinder duct with the inner diameter of 30 mm. The flow rate was controlled by the pump and monitored by a built-in flow meter. The vibration apparatus was composed of a piezo-vibrator, a function generator. and a power amplifier. The direction of vibration was radial to the fluid flow. Gas flow rates of up to 6 l/min through the 120-cm-Jong hollow fibers have been achieved by exciting a piezo-vibrator. The output of PVDF sensor were investigated by various frequencies in VIVLAD. The experimental results showed that VIVLAD would be enhance oxygen transfer efficiency.

• Journal of Communications and Networks
• /
• v.4 no.4
• /
• pp.344-350
• /
• 2002

This work summarizes the current state of the art in software radio for 4G systems. Specifically, this work demonstrates that classic radio structures, e.g., heterodyne reception, homodyne reception, and their improved implementations, are inadequate selections for multi-mode reception. This opens the door to software defined radio, a novel reception architecture which promises ease in multi-band, multi-protocol design. The work presents the many advantages of such an architecture, including flexibility, reduced cost via component reduction, and improved reliability via, e.g., the elimination of environmental instability. The work also explains the limitations that currently curtail the widespread use of SDR, including issues surrounding A/D converters, management of software and power, and clock generation. This provides direction for future research to enable the broad applicability of SDR in 4G cellular and beyond.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.426-429
• /
• 1999

In this paper, we have provided the measurement technique of the grounding mesh resistance by field measurements. The standard of measurement is specified in the IEEE Std 81.2-1991 and JEAC 5001-1988, which is the the fall-of-potential method by test-current injection, but this method is difficult to apply at field, where is small around a electric power substation of domestic. For the convenient measurement method, space of assistant probe and quantity of test-current injection are changed step for step. As the result, ' the proposed measurement technique of grounding mesh resistance is that the space of current and potential probes must be fixed at 150rn from a grounding mesh, the test-current injection has to keep 5A or more.

• ETRI Journal
• /
• v.35 no.4
• /
• pp.617-624
• /
• 2013

Low power consuming and highly responsive semiconductor-type microelectromechanical systems (MEMS) gas sensors are fabricated for real-time environmental monitoring applications. This subsystem is developed using a gas sensor module, a Bluetooth module, and a personal digital assistant (PDA) phone. The gas sensor module consists of a $NO_2$ or CO gas sensor and signal processing chips. The MEMS gas sensor is composed of a microheater, a sensing electrode, and sensing material. Metal oxide nanopowder is drop-coated onto a substrate using a microheater and integrated into the gas sensor module. The change in resistance of the metal oxide nanopowder from exposure to oxidizing or deoxidizing gases is utilized as the principle mechanism of this gas sensor operation. The variation detected in the gas sensor module is transferred to the PDA phone by way of the Bluetooth module.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06b
• /
• pp.238-242
• /
• 2007

최근들어 휴대용 미디어 플레이어(Portable Media Player)와, 노트북 컴퓨터, PDA(Personal Data Assistant)의 사용이 늘어나면서 얼마나 오랜 시간동안 휴대용 장치를 사용하는가에 대한 문제가 큰 이슈로 떠오르고 있다. 그에 대해 많은 연구가 이루어져 있으며, 현재도 활발히 연구가 진행되고 있다. 본 논문에서는 프로세스 상태, 배터리 상태 그리고 응용프로그램 종류로 이루어진 상황을 고려한 동적 전력관리 시스템에 대해서 제안하고 그에 따른 세부적인 모듈에 관한 설명과 실험 결과를 보여준다. 실험결과 제안한 시스템을 적용하지 않았을 경우와 비교하여 약 14%의 전력 손실 감소 효과를 볼 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.497-499
• /
• 2005

A portable terminal assistant market grows rapidly every year and it requires many change in research on display devices. Among many newly developing methods, OLED(Organic Light Emitting Diode) is considered an advanced flat display device because its excellent characteristics, including high speed response, full color performance, low power consumption and flux of panel. However changes in the market of display shows that the market will require 3-dimensional images, but it is hard for existing 2-dimensional displays to make 3-dimensional images. Therefore we will try to find various methods such as holograms. In this paper, we will show existing flat displays can make 3-dimensional images by applying Lenticular Screen printing techniques on the organic semiconductor display device.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.6
• /
• pp.77-83
• /
• 2004

Cutting by a high speed laser cutting machine is one of most effective technologies to improve productivity. This paper has studied to obtain the cutting characteristics and optimal cutting conditions in a high speed feeding type laser cutting machine by Tacuchi method in design of experiments. A Lf(34) orthogonal array is adopted to study the effect of adjustment parameter. The adjustment parameters consist of cutting speed, laser power, laser output duty and assistant gas pressure. And the quality feature is selected as surface roughness of sheet metal. Variance analysis is performed in order to evaluate the effect of adjustment parameters on the quality feature of laser cutting process.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.2 s.332
• /
• pp.31-40
• /
• 2005

The Multi-Threshold CMOS (MTCMOS) technology provides a solution to the high performance and low power design requirements of mobile computing applications. In this paper, we (i) motivate the post-mask-tooling performance enhancement technique combined with the MTCMOS leakage current suppression technology, and (ii) develop a practical MTCMOS ASIC design methodology which fine-tunes and integrates best-in-class techniques and commercially available tools to fix the new design issues related to the MTCMOS technology. Towards validating the proposed techniques, a Personal Digital Assistant (PDA) processor has been implemented using the methodology, and a 0.18um Process. The fabricated PDA processor operates at 333MHz which has been improved about $23\%$ at no additional cost of redesign and masks, and consumes about 2uW of standby mode leakage power which could have been three orders of magnitude larger if the MTCMOS technology was not applied.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.32-42
• /
• 2015

In this paper, we considered the scenario that one cellular link and muti-D2D links share the same frequency resource which can improve the spectrum efficiency during uplink communication in LTE (Long Term Evolution)-Advanced network. In order to reduce the interference caused to the D2D users, we set DME (Discovery and Management Entity) which can send the area information to eNB(evolved Node B). We proposed a resource allocation scheme by using these assistant devices to reduce the interference that CUE (Cellular User Equipment) causes to DUE Rx (D2D UE Receiver). Basing on the area information, in order to mitigate the interference among the D2D pairs which share the same frequency resource, a power control scheme has been proposed. The simulation results prove that by using the DMEs, the proposed schemes improve the stability of D2D communication and bring the highest performance of the communication system when comparing to the other different schemes.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.7
• /
• pp.685-696
• /
• 2011

An efficient laparoscope manipulator robot was designed to automatically control the position of laparoscope via a passive joint on end-effector position. The end position of the manipulator is controlled to have corresponding velocity defined in the global coordinate space using laparoscopic visual information. Desired spatial position of laparoscope was derived from detected positions of surgical instrument tips, then the clinical viewing plane was moved by visual servoing task. The laparoscope manipulator is advantageous for automatically maintaining clinically important views in the laparoscopic image without any additional operator. A laparoscope is mounted to a holder which is linked to four degree of freedom manipulator via universal joint-type passive rings connection. No change in the design of laparoscope or manipulator is necessary for its application to surgery assistant robot system. Expanded working space and surgical efficiency were accomplished by implementing slant linking structure between laparoscope and manipulator. To ensure reliable positioning accuracy and controllability, the motion of laparoscope in an abdominal space through trocar was inspected using geometrical analysis. A designed laparoscope manipulating robot system can be easily set up and controlled in an operation room since it has a few subsidiary devices such as a laparoscope light source regulator, a control PC, and a power supply.