• 한국군사과학기술학회지
• /
• 제12권6호
• /
• pp.760-767
• /
• 2009

This thesis focuses on the study of high-power, coupled-cavity traveling-wave tube(CCTWT) for radar applications. The CCTWT employed a reentrant double-slot staggered RF cavity structure. Computational analysis of the X-band, double-slot staggered structures is carried out through the use of HFSS code, which solves Maxwell's equations fully in three-dimensions. The non-linear, large-signal performance of CCTWTs are predicted from numerical simulations using a three-dimensional particle-in-cell code, MAGIC3D. With beam voltage set to 12.7~13kV and beam current at 300mA, the CCTWT produces a saturated radiation power of 350~430W, corresponding to an electronic efficiency of 8.9~11.2% and a gain of 23.7~24.2dB within a frequency range of 7.9~8.4GHz.

• 한국통신학회논문지
• /
• 제31권6A호
• /
• pp.627-633
• /
• 2006

MBC(meteor burst communications)는 그 전송로의 많은 장점에도 불구하고 도통율이 수%이하로 낮다는 큰 결점이 있다. 이를 위해 큰 경제적 부담 없이 전송 채널의 도통율을 향상시키는 방법으로서 간단한 구조의 DS(Direct Sequence)시스템을 제안하였다. 제안된 DS 간이 수신방식은 동기신호의 포착이나 유지에 소요되는 시스템을 생략할 수가 있어서 MBC가 가지는 경제성을 만족시킬 수 있으나, 잡음의 영향을 크게 받아 도통율이 떨어지는 단점이 있다. 이를 위해 제안된 DS 시스템에 Transversal Filter회로를 적용하여 SNR을 6dB이상 향상시켰다. 이 방법으로 개선되는 효과는 수신신호가 약한 환경에서 보다 더 큰 것으로 나타나는데 시뮬레이션에 의하면 SNR이 약 6dB 개선되었을 때 평균 버스트 길이가 100ms인 것은 70%로 개선되어 170ms로 되고, 50ms환경에서는 130%개선되어 115ms가 되어 수신신호가 약한 환경에서 도통율이 크게 개선됨을 확인할 수 있었다.

• Corrosion Science and Technology
• /
• 제20권5호
• /
• pp.308-314
• /
• 2021

Neutron dose level at bottom head of a reactor pressure vessel (RPV) was calculated using reactor vessel neutron transport for a Korean nuclear power plant A. At 34 EFPY with a 40-year (2042) design life after plating repair, irradiation fast neutron effect was 6.6x10¹⁵ n/cm². As helium(He) gas can be generated by Ni only at 1/10⁶ level of 5 × 10²¹ n/cm², He generation possibility in the Ni plating layer is very little during 40 years of operation (2042, 34 EFPY). Thermal neutrons can significantly affect the generation of He from Ni metal. At 10 years after a repair, He can be generated at a level of about 0.06 appm, a level that can add general welding repair without any consideration. After 40 years of repair, 9.8 appm of He may be generated. Although this is a rather high value, it is within the range of 0.1 to 10 appm when welding repair can be applied. Clad repair by Ni electroplating technology is expected to greatly improve the operation efficiency by improving the safety and shortening the maintenance period of the nuclear power plant.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.129-132
• /
• 2004

A guard lamp system has been installed at the PV positive center, located at Gwangju in Korea. Digital environment that is represented to internet is displacing business way of industry and business achievement way with the fast speed being giving great change on life whole, improve existence business process utilizing internet and Web connection technology, information superhighway to tradition industrialist manufacture and e-transformation's propulsion that wish to maximize productivity and administration efficiency is spread vigorously. In this paper, we wish to accomplish generation equipment's heighten stability and believability through remote monitoring and control of guard lamp system. This paper describes the design of the monitoring system for the sensing data and indirect controlling of the guard lamp system. Most of the conventional monitoring systems depend on the special hardware and software. The essential design of monitoring system is to provide the convenience for the user and the portability for the system. In order for the system to fulfill its requirements, it was designed using Labview GUI facility based on the Windows 2000 environment of IBM PC compatible and Add-oncard based on the TCP/IP protocol. Advantage of the monitoring system are a personnel expenses curtailment effect, of the place restriction and unmanned system of the generationplants, etc..

• 한국자동차공학회논문집
• /
• 제2권5호
• /
• pp.48-57
• /
• 1994

The specific power output and thermal effeciency of any two-stroke engine are dependent on its scavenging behavior. Among the many factors which influence on the scavenging process, the cylinder head shape is one of the important factor. Hence in this study three different type models of cylinder head shape which are the cylindrical, the spherical and the arbitrary shape are studied to show the effects of the turbulent scavenging process in the cylinder with one inlet port, two side ports and one exhaust port. A modified version of KIVA-II which strip out of or add planes of cells across the mesh above the piston for flow simulation of two-stroke engine is used. The $k-{\varepsilon}$ turbulent model is used. The results show that the flow in a two-stroke engine cylinder of the spherical head shape among the three different type model is a desirable for efficient scavenging.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.908-914
• /
• 2019

Fusion power shutdown system (FPSS) is a safety system to stop plasma in case of accidents or incidents. The gas injection system for the FPSS presented in this work is designed to research the flow development in a closed system. As the efficiency of the system is a crucial property, plenty of experiments are executed to get optimum parameters. In this system, the flow is driven by the pressure difference between a gas storage tank and a vacuum vessel with a source pressure. The idea is based on a constant volume system without extra source gases to guarantee rapid response and high throughput. Among them, valves and gas species are studied because their properties could influence the velocity of the fluid field. Then source pressures and volumes are emphasized to investigate the volume flow rate of the injection. The source pressure has a considerable effect on the injected volume. From the data, proper parameters are extracted to achieve the best performance of the FPSS. Finally, experimental results are used as a quantitative benchmark for simulations which can add our understanding of the inner gas flow in the pipeline. In generally, there is a good consistency and the obtained correlations will be applied in further study and design for the FPSS.

• Journal of Biosystems Engineering
• /
• 제33권6호
• /
• pp.384-389
• /
• 2008

Three prototype chestnut harvesters were constructed and evaluated their chestnut collection ability and field efficiency. Air-lock paddle system successfully picked up all loose material, and pick up efficiency was about 56 kg/h. Power required to operate this system was evaluated to be 8.7 kW with an air flow rate of $32.6\;m^3/min$. A radial blade type blower with 0.41 m impeller diameter was considered to be a minimum size for this system. For the auger system, air was sucked into the cylinder as the hinged flat cover began to be opened by the material pushed by the auger, and the empty burrs flew back to the container through the space between auger flights and collected in the bottom of the container. It was considered to add a device to prevent air from flowing back or to use the back flowing air for separation of burrs and nuts inside the container. The venturi system could not pick up chestnuts, as they only carried part way up to the suction hose. Consideration was given to an idea that the venturi could be used as a cleaning and separation mechanism for containers filled with both empty burrs and good nuts. A minimum vacuum of 129 mm wg was required to pick up chestnuts, and the corresponding inlet air velocity was 19.3 m/s. 104 mm of vacuum, which was about 81 % of that required for nuts, was enough to pick up burrs with nuts inside. Also, empty burrs with higher moisture content recorded the same pressure as for the burrs with nuts.

• 한국통신학회논문지
• /
• 제30권11A호
• /
• pp.1073-1080
• /
• 2005

MBC(meteor burst communications)는 그 전송로의 많은 장점에도 불구하고 도통율이 수$\%$이하로 낮다는 큰 결점이 있다. 이를 위해 큰 경제적 부담 없이 전송 채널의 도통율을 향상시키는 방법으로서 기존의 DS(Direct Sequence) 간이 수신시스템에 정귀환회로를 적용하였다. 기존의 DS 간이 수신방식은 동기신호의 포착이나 유지에 소요되는 시스템을 생략할 수가 있어서 MBC가 가지는 경제성을 만족시킬 수 있으나, 잡음의 영향을 크게 받아 도통율이 떨어지는 단점이 있다. 이를 위해 DS 간이 수신시스템에 정귀환회로를 적용하여 SNR을 6dB이상 향상 시켰다. 이 방법으로 개선되는 효과는 수신신호가 약한 환경에서 보다 더 큰 것으로 나타나는데 시뮬레이션에 의하면 SNR이 약 6dB 개선되었을 때 평균 버스트 길이가 100ms인 것은 $70\%$로 개선되어 170ms로 되고, 50ms환경에서는 $130\%$개선되어 115ms가 되어 수신신호가 약한 환경에서 도통율이 크게 개선점을 확인할 수 있었다.

• 한국통신학회논문지
• /
• 제36권11B호
• /
• pp.1373-1382
• /
• 2011

무선 홈 네트워크 환경에서 넓은 확장성과 저전력이 통신이 기능한 Zigbee는 홈 네트워크에서 가장 이상적인 통신기술이다. 하지만 Zigbee는 숨겨진 단말 문제와 전송 지연 문제를 항상 가지고 있어 무선 홈 네트워크에서 많이 사용되고 있지 못하고 있다. 이런 Zigbee가 가지고 있는 두 문제를 해결하기 위해 본 논문에서는 새로운 프레임을 제안한다. 제안하는 프레임은 슈퍼프레임 구간을 줄여서 생기는 공간에 제어 프레임 구간을 추가하는 구조를 이루어져 있다. 새롭게 구성된 제어프레임 구간에서는 제어프레임을 이용하여 단말의 상태 정보를 교환하여 숨겨진 단말 문제를 해결할 것으로 예상한다. 또한 제어 프레임 구간과 슈퍼 프레임 구간사이에 동기화에 사용되는 비콘을 넣어 하위 계층에서 발생하는 전송 지연 문제를 해결할 수 있다고 예상한다. 제안하는 프레임이 숨겨진 단말 문제와 전송 지연 문제를 해결하였는지 확인하기 위해 OPNET을 통해 Zigbee Qos Parameter 환경에서 시뮬레이션을 하였다. 전송 지연 문제를 해결여부를 확인하기 위해 전송지연시간을 측정하였으며, 숨겨진 단말 문제를 해결여부를 확인하기 위해 전송률과 처리율을 측정하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.953-956
• /
• 2003

Digital environment that is represented to internet is displacing business way of industry and business achievement way with the fast speed being giving great change on life whole, improve existence business process utilizing internet and Web connection technology, information superhighway to tradition industrialist manufacture and e-transformation's propulsion that wish to maximize productivity and administration efficiency Is spread vigorously. In this paper, we wish to accomplish generation equipment's heighten stability and believability through remote monitoring and control of PV system. This paper describes the design of the monitoring system for sensing the monitoring data and indirect controlling of the PV system. Most of the conventional monitoring system depend on the special hardware and software. Basic design goal of monitoring system is to provide the convenience for the user and the portability for the system. In order for the system to fulfill its requirements, it was designed using Labview GUI facility based on the Windows 2000 environment of IBM PC compatible and Add-on card based on the TCP/IP protocol. Advantage of the monitoring system are a personnel expenses curtailment effect, free of the place restriction and unmanned system of the generation plants, etc..