• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.6
• /
• pp.111-117
• /
• 2009

In the wideband code division access (WCDMA) systems, a pilot channel is used to determine WCDMA network coverage, cell identification, synchronization, timing acquisition and tracking, user-set handoff, channel estimation, and so on. A wireless repeater, which is deployed in the urban area for the WCDMA system to meet the growing demand on wireless communication services, has the possibility to receive several pilot signals from a large number of base stations, however, cannot distinguish its service base station's signal among them. This pilot interference results in frequent handoffs in the user equipment, which degrades the radio reception, transmission efficiency, quality of service, and channel capacity and increases the unwanted power consumption. In this paper, thus, we propose a pilot pollution interference cancellation scheme using one of the adaptive estimation algorithms, normalized least mean square (NLMS), which is applicable to a wireless repeater. We carried out link-level and network-level computer simulations to evaluate the performance of the proposed scheme in a wireless repeater. The simulation results verify the bit error rate (BER) improvement in the link level and the call drop probability improvement in the network level.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.97-107
• /
• 2013

Underwater wireless communication systems can be useful for underwater environment observation, catastrophe prevention, ocean resources exploration, ocean organism research, vessel sinking exploration, and so on. However, unlike terrestrial wireless communication, underwater wireless communication should consider factors such as long propagation delay, limited transmission capacity, high bit-error rate due to potential loss in power, ambient noise, man-made noise, multi-path, etc., because of the inherent characteristics of water. Thus, in this paper, we propose a suitable media access control(MAC) protocol that applies a combination of the ALOHA MAC protocol and the CSMA/CA MAC protocol to underwater environment. We further propose a mathematical analysis model to evaluate performance. We also verify performance improvement in the proposed scheme in comparison with existing MAC protocols.

• Journal of Biosystems Engineering
• /
• v.36 no.6
• /
• pp.491-499
• /
• 2011

The objective of this study was to develop the export strategic core technologies for IT fusion next generation agricultural machines by the analysis of comprehensive and cooperative systems of industries, universities, and institutes. In order to achieve the objective of this study, an expert panel was formed and operated. The first survey was conducted by the Delphi method. For this the export strategic core technologies were surveyed and analyzed using the questionnaire. Based on the results of the first survey, the second survey was conducted. The questionnaire used for the second survey was designed by results of the first survey. The results of the second survey was analyzed by AHP method. The third survey was conducted based on the second one, and the final results were analyzed and the export strategic core technologies were developed through the expert meeting. The study results showed six export strategic core technologies as the followings : 1) environment-friendly engine technology for high performance 2) high performance/high efficiency power transmission system technology 3) development of measurement system technology for safety of agricultural products 4) field application of sensor networks 5) large size combine development technology for high performance 6) quality evaluation technology for agricultural products.

• The KIPS Transactions:PartD
• /
• v.10D no.3
• /
• pp.359-366
• /
• 2003

Although the reuse of the cached data for scrolling the map reduces the amount of passed data between client and server, it needs the conversions of data coordinates, selective deletion of objects, cache compaction and object structuring step in the clients. The conversion is a time- intensive operation due to limited resources of mobile phones such as low computing power, small memory. Therefore, in order to control the map efficiently in the vector map service based mobile phones, it is necessary to study the methods which reuse cached objects for reducing wireless network bandwidth and overwhelming the limited resources of mobile phones as well. This paper proposes the methods of reusing pre-received spatial objects for map control in the mobile vector map service system based on client-server architecture. The experiments conducted on the Web GIS systems with real data show that the proposed method is appropriate to map services for mobile phone. We also analyze the advantages and drawbacks between the reuse of cached data and transmission of raw data respectively.

• International Journal of Automotive Technology
• /
• v.8 no.3
• /
• pp.375-382
• /
• 2007

The multi-driver off-road vehicle drive-line consists of many components, with close connections among them. In order to design and analyze the drive-line efficiently, a modular methodology should be taken. The aim of a modular approach to the modeling of complex systems is to support behavior analysis and simulation in an iterative and thus complex engineering process, by using encapsulated submodels of components and of their interfaces. Multi-driver off-road vehicles are comparatively complicated. The driving-line is an important core part to the vehicle, it has a significant contribution to the performance. Multi-driver off-road vehicles have complex driving-lines, so performance is heavily dependent on the driving-line. A typical off-road vehicle's driving-line system consists of a torque converter, transmission, transfer case and driving-axles, which transfers the power generated by the engine and distributes it effectively to the driving wheels according to the road condition. According to its main function, this paper proposes a modularized approach for design and evaluation of the vehicle's driving-line. It can be used to effectively estimate the performance of the driving-line during the concept design stage. Through an appropriate analysis and assessment method, an optimal design can be reached. This method has been applied to practical vehicle design, it can improve the design efficiency and is convenient to assess and validate the performance of a vehicle, especially of multi-driver off-road vehicles.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.73-79
• /
• 2014

Visible light communication is a communication method using an LED having a high-speed ON / OFF rate data to be transmitted, it is used as a wireless high speed data transmission. VLC system evolves, the problem of basic research is intended to improve performance and ensure reliability of the communication. The nature of the visible light communication, communication is performed only in the reach of the light, which indicates a big difference by the emission angle of the light. Therefore, in this paper, in the case of indoor environments generally, with the attributes of the multiple LED is equipped, was applied to a MIMO (Multiple Input Multiple Output) communication system. and analyzed SNR performance and total power can be obtained on the reception side by changing the emission angle of the transmitter. As a result of the simulation was run against this, it was confirmed that there is a significant impact on the performance of BER and SNR performance by the emission angle of the transmitter.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.29-34
• /
• 2017

This paper considers hybrid beamforming for millimeter wave system in uplink transmission where multiple users send their data streams simultaneously. Hybrid beamforming has low-cost and low power consumption features compared to conventional digital beamforming schemes. We assume that each user uses one transmit antenna and sends one data stream, while the base station has multiple receive antennas and multiple radio frequency chains. Therefore, hybrid beamforming is performed only at the base station. We also assume that each user does not know instantaneous channel side information (CSI), while the base station is able to estimate the CSI from all users accurately. Under this channel assumption, the outage probability is not zero. We evaluate the outage probability of the considered hybrid beamforming as a performance metric through computer simulations. We show that the outage probability of hybrid beamforming approaches that of digital beamforming in some cases.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.5
• /
• pp.226-232
• /
• 2000

This paper presents application results of the augmented matrix eigen-sensitivity theories to TCSC siting problem for damping the inter-area low frequency oscillation in the large KEPCO system. First and second-order eigen-sensitivities of the inter-area low frequency oscillation in the large KEPCO system. First and second-order eigen-sensitivities of the inter-area mode are computed fro changes in susceptance of the transmission lines. The lines having high sensitivity are chosen as the initial candidates for installing TCSC. Then for each of the chosen candidates, Bodeplot of the transfer function with line susceptance as the input and the bus voltage at one side of the line as the output is computed. Using the Bode plots, the lines having any zeros near the inter-area mode are screened out since design of TCSC controller is very difficult in such a case. The $H_{\infty}$ TCSC controller installed at any finally chosen candidate is found to be effective in damping the inter-area oscillation, and the proposed TCSC siting algorithm is proved to be valid. Design of $H_{\infty}$ controller is described in Part IIof this paper.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.7-12
• /
• 2014

The data forwarding transmission is an important function of the relay in cooperative communication in wireless communication systems. However, additional relay cause the waste of power consumption and cost. Therefore, in this paper, we consider how to use the user mobile devices in stead of relays to deal with this problem. In this paper, we proposed the protocol that divide each relay into two states of idle and non-idle. The receiver has two functions of base station and user mobile device. In this case, it is possible that no additional cost, and improve the spectral efficiency and network capacity. We verified BER performance for the proposed protocol over Rayleigh fading through Monte-Carlo simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8B
• /
• pp.809-818
• /
• 2002

In this paper, we propose a fast cell search algorithm keeping compatible with the standard cell search algorithm of the WCDMA system. The proposed algorithm can acquire the synchronization of slot and frame times, and the code group identification using only one synchronization channel while the standard algorithm employs two synchronization channels called P-SCH and S-SCH. The proposed synchronization channel structure is the same as the P-SCH structure of the WCDMA system. However, the P-SCH is modulated with a specific polarization code, which is one element of new code group codes. The proposed algorithm can reduce both the BS' transmission power and the complexity of receiver as compared with the conventional one since only on synchronization channel is used. It is shown through the computer simulation that the proposed algorithm yields a significant improvement in terms of cell search time compared with the standard especially in low SNR environments.