• Journal of Welding and Joining
• /
• v.18 no.3
• /
• pp.51-59
• /
• 2000

Sink roll has been used in molten 55%Al-Zn alloy bath of continuous galvanizing line for sinking and stabilizing working steel strip in molten metal bath. In the process, the sink roll body inevitably build up dross compounds and pitting on the sink roll surface during 55%Al-Zn alloy coated strip production, and the life time of the sink roll is shorten by build up dross compounds and pitting. The present study examined the application of thermally sprayed ceramic coatings method on sink roll body for improving erosion resistance at molten 55% Al-Zn pool. In this experiment, the stainless steels such as STS 316L and STS 430F were used as the substrate materials. The CoNiCr and WE-Co powder were selected as bond coating materials. Moreover $Al_2O_3-ZrO_2-SiO_2 and ZrO_2-SiO_2$ powders selected as the top coating materials. Appearances of the specimens before and after dipping to molten 55%Al-Zn pool were compared and analyzed. As a result of this study, STS430F of substrate, WC-Co of bond spray coatings, $ZrO_2-SiO_2$ power of top spray coatings is the best quality in erosion resistance test at molten 55%Al-Zn pool

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.4
• /
• pp.45-50
• /
• 2012

A family of multi-die DRAM packages was developed that incorporate the full functionality of an SODIMM into a single package. Using a common ball assignment analogous to the edge connector of an SODIMM, a broad range of memory types and assembly structures are supported in this new package. In particular DDR3U, LPDDR3 and DDR4RS are all supported. The center-bonded DRAM use face-down wirebond assembly, while the peripherybonded LPDDR3 use the face-up configuration. Flip chip assembly as well as TSV stacked memory is also supported in this new technology. For the center-bonded devices (DDR3, DDR4 and LPDDR3 ${\times}16$ die) and for the face up wirebonded ${\times}32$ LPDDR3 devices, a simple manufacturing flow is used: all die are placed on the strip in a single machine insertion and are sourced from a single wafer. Wirebonding is also a single insertion operation: all die on a strip are wirebonded at the same time. Because the locations of the power signals is unchanged for these different types of memories, a single consolidated set of test hardware can be used for testing and burn-in for all three memory types.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.1
• /
• pp.21-28
• /
• 2015

A Tsunami damper, which is installed on the outer wall of a nuclear power plant, is usually used as a ventilation window of the machine room, but can serve as a device for preventing flooding of the machine room when large waves flow over the outer wall. The sealing strip, which is inserted between the casing and the blades, plays an important role in maintaining a watertight environment. In this study, in order to ensure an effective watertight performance of the tsunami damper, FE analysis is conducted to compare the contact characteristics of sealing strips with three different section shapes. In the analysis, the casing and the blade of Tsunami damper are assumed to be rigid bodies; the sealing strip is assumed to be a flexible body. The stress, the strain, and the contact pressure are investigated to examine the sealing performance of each model.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2009_2010
• /
• 2009

Thin-gauged 3% Si-Fe sheets having a high magnetic induction of over 1.9 T have been developed for the purpose of applications where operation frequency is higher than power frequency. In order to clarify requirements of iron loss characteristics for the applications, iron loss characteristics of the newly developed strip were investigated by iron loss separation method and were compared with those of commercially produced 0.3 mm-thick electrical sheets. In case of relatively high excitation induction(1.7 T) and low frequency(60 Hz), reducing hysteresis loss is effective to decrease total iron loss. In case of relatively low excitation induction(1.0 T) and high frequency(1 kHz), reducing eddy-current loss is effective by decreasing thickness and grain size to improve total iron loss.

• Journal of Space Technology and Applications
• /
• v.1 no.1
• /
• pp.33-40
• /
• 2021

Based on the requirements of a total weight of 42 kg or less, the NEXTSat-2 SAR (synthetic aperture radar) system was developed. As the NEXTSat-2 is a small-sized satellite, the SAR system was designed to account for about 40% of the dry mass of the payload relative to the total mass. Among the major components of the SAR system - which are an antenna, an RF transceiver, a baseband signal processor, and a power unit - a part with a particularly large dry mass is the antenna, the core of the SAR system. Whereas various selections are possible in consideration of gain and efficiency when designing the antenna, the micro-strip patch array antenna was adopted by reflecting the dry mass, power, and resolution required by the NEXTSat-2 project. In order to meet the mission requirement of the NEXTSat-2, the antenna was developed with a frequency of 9.65 GHz, a gain of 42.7 dBi, and a return loss of -15 dB. The performance of the antenna was verified by conducting a field test onboard the vehicle.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.4
• /
• pp.409-414
• /
• 2014

The parameters and operating characteristics of the switched reluctance motor (SRM) for the electric drive of the overland belt conveyor CLM-4500 have been presented. The motor power capacity has been equal to 1250 kW, the motor speed - 1000 min-1. SRM power supply has been provided by a three-phase voltage inverter and a 12-pulse rectifier circuit. The group electric drive has been installed on sections number 2 and 3, 3770 m and 3375 m length, respectively, on the areas of "Berezovsky Strip" JSC, a member of the Siberian Coal Energy Company.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.413-416
• /
• 2007

If obstacle in GIS(Gas Insulted Switchgear), its affects are great are on the community and it is consequently demanded lots of difficulities to recover and repair. Accordingly, diagnosis techniques, that are able to prevent from accidents before they happen by providing more stable and highly reliable power effectively and finding sign of the accidents is very important. The strip-senser measured impedance bandwidth of the proposed antenna is from 0.5[GHz] to 2.5[GHz] with the stop band from 0.5[GHz] to 1.7[GHz] for VSWR<2. The antenna is will play an important role for the senser for insulation diagnosis system by UHF method of real site GIS and power equipment using $SF_6$ gas.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.2
• /
• pp.263-270
• /
• 2008

We studied partial discharge detection by sensing electromagnetic waves emitted from the partial discharge source in an HV Rotating Machine using a UWB sensor. In this study, we design a new type of compact low frequency UWB sensor based on micro-strip technology. We also perform many experiments of offline and dismantled testing compared with the existing HFCT on stator winding of the HV generator. We mention the detailed design of a new compact UWB sensor along with the time domain PRPD pattern and frequency domain results of partial discharge in the stator winding of a 6.6kV rotating machine by offline testing performed in a laboratory.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.739-748
• /
• 2013

In this study, analytical works for the induced winds due to traveling vehicles on highway have been conducted by Computation Fluid Dynamics (CFD). The traveling condition was considered in two cases: (a) single direction and (b) bi-direction. The analysis was focused on the effects of the induced winds on the upper part of a median strip while the aerodynamic characteristics of the vehicles were directly analyzed in the previous studies. From the analysis results, it has been found that the maximum magnitude of the induced winds was 2.2 m/s when the vehicles travel with the speed of 50 km/h. Additionally, 4.0 m/s and 5.3 m/s were obtained with the speed of 90 km/h and 120 km/h, respectively. Especially, the induced winds was generated about 84% of the vehicle speed at 1.0 m above from the median strip when the vehicles travel with the speed of 120 km/h. The induced winds was maintained during the very short period while the traveling. conclusively, it is noted that the wind power generation can be possible by using the small-sized wind power generators installed on median strips throughout the analytical results in this study.

• Progress in Superconductivity and Cryogenics
• /
• v.10 no.1
• /
• pp.52-56
• /
• 2008

According to the improvement of HTS conductor, HTS tapes which have the high current capacity have been recently researched in several nations. For large power application, AC loss is the most important issue in the development of AC superconducting power devices because it is closely related to the system operation efficiency. In 1st generation wire of HTS conductor, BSCCO, AC loss is too large to use for power application. Also, It is well known in recently years that YBCO CC, the 2nd generation wire, has also too much AC loss to apply to AC power devices. There are many trials to develop the new HTS wire having the low AC loss around the world. In this research, we present the measurment result of magnetization losses in SmBCO coated conductors. We measured the magnetization loss generated by perpendicularly exposed external magnetic field and compared with the analytic value of the strip model. Also, we presented the results compared with measured magnetization loss of an YBCO coated conductor.