• Journal of Power Electronics
• /
• v.13 no.3
• /
• pp.390-399
• /
• 2013

As a result of the depletion of fossil fuels and environmental contamination, it has become important to use renewable energy. For the stable utilization of renewable energy sources, energy storage devices must be used. In addition, renewable and distributed power sources with energy storage devices must operate stably under grid-connected mode. This paper proposed dynamic response modeling for renewable power generation systems including a charger/discharger with an energy storage device in order to derive a method to guarantee stable operation while fully utilizing the energy from the energy storage device. In this paper, the principle operation and design guidelines of the proposed scheme are presented, along with a performance analysis and simulation results using MATLAB and PSIM. Finally, a hardware prototype of a 1kW power conditioning system with an energy storage device has been implemented for experimental verification of the proposed converter system.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.534-538
• /
• 2001

Energy storage devices with high energy density as well as high power density are expected to be developed from the point of view of compensation of fluctuating load and generated power by distributed generations such as wind turbines, photovoltaic cells and so on. SMES (Superconducting Magnetic Energy Storage) has higher power density than other energy storage methods, and secondary batteries have higher energy density than SMES. The hybrid energy storage device using SMES and secondary batteries is proposed as the energy storage method with higher power and energy density, the sharing method of power reference value for each storage device, simulation and experimental results are presented.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.9
• /
• pp.89-98
• /
• 2014

A diagnostic fluoroscopy X-ray system uses a 32kW or greater X-ray generator for obtaining real-time moving images and high-resolution images. Fluoroscopy X-ray systems have to use a high-capacity AC power source to perform long-time low-power fluoroscopy and short-time high-power spot exposure. In this paper, we propose a hybrid type X-ray generator for fluoroscopy X-ray system which can perform fluoroscopy and spot exposure with a low-capacity AC power source and an energy storage device. The characteristics of energy storage devices are compared and each energy storage device is modelled to equivalent circuit. And the characteristics of available energy are analyzed as a function of output voltage and power. A 32kW class hybrid X-ray generator with EDLC as an energy storage device for fluoroscopy X-ray system was constructed, and its validity was verified by means of simulations and experiments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.422.2-422.2
• /
• 2016

스마트폰, 태블릿 등의 디바이스의 발전에 따라 휴대성이 매우 중요해졌다. 디바이스의 크기, 두께, 유연성에 관한 연구가 활발히 진행되고 있으며, 그 중에서도 energy storage device의 flexibility를 향상시키는 연구가 주목 받고 있다. Energy storage device의 성능 향상을 위해서는 power density를 높여야 하며 flexibility를 위해서는 전극판과 전극소재 간의 부착력을 증가시켜야 한다. 본 연구에서는, power density와 소재 간의 부착성을 개선시키기 위해 기존 graphene보다 표면적이 넓으며 power density가 좋고 전극판과의 부착성이 좋은 hybrid GNP-CNT를 사용하였다. 그리고 Ag NWs/CNT PET film 을 사용하여 전도성이 있는 flexible한 전극판을 사용하였다. SEM 측정을 통해 표면 분석을 하였고, sample에 패턴을 하고 Bending test를 하여 부착성을 확인하였다. 또한, CV curve를 측정하여 supercapacitor의 특성을 확인하였다. 향후, $MnO_2$ NWs를 hybrid GNP-CNT에 합성시킴으로 energy storage device의 energy density를 더욱 향상시키는 연구를 진행할 것이다.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.495-498
• /
• 1998

Mobile computers have restrictions for size, weight, and power consumption that are different from traditional workstations. Storage device must be smaller, lighter. Low power consumed storage devices are needed. At the present time, flash memory device is a reasonable candidate for such device. But flash memory has drawbacks such as bulk erase operation and slow program time. This causes of worse average write performances. This paper suggests a storage method which improves write performance.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.4
• /
• pp.32-40
• /
• 2007

A mobile device accesses large-sized data in object-based IP storage as an object unit over IP network. It relies heavily on a WLAN device, which has been known as one of the major power consumers. This paper designs and implements low-power object-based IP storage for mobile devices using an efficient WLAN power control. The proposed WLAN power control exploits prefetch buffer to maximize the idleness for incoming network traffic and controls available WLAN power modes to minimize the power consumption. Our experimental results reveal that the proposed WLAN control can save the total power consumption in a PXA270-based mobile device about 9% while playing the multimedia contents through an object-based IP storage device

• The KIPS Transactions:PartA
• /
• v.16A no.5
• /
• pp.357-368
• /
• 2009

Mobile IP storage has been proposed to overcome storage limitation in the flash memory and hard disks. It provides almost capacity-free space for mobile devices over wireless IP networks. However, battery lifetime of the mobile devices is reduced rapidly because of power consumption with continuous use of a WLAN device when multimedia contents are being streamed through the mobile IP storage. This paper proposes an energy-efficient WLAN device power control technique for streaming multimedia contents with the mobile IP storage. The proposed technique consists of a prefetch buffer input/output module, a WLAN device power control module, and a reconfigurable prefetch buffer module. Besides, it adaptively determines the size of the prefetch buffer according to a quality of the multimedia contents, and it dynamically controls the power mode of the WLAN device on the basis of power on-off operations while streaming the multimedia contents. We evaluate the performance of the proposed technique on a PXA270-based mobile device that employs the embedded linux 2.6.11, Intel iSCSI reference codes, and a WLAN device. Extensive experiments reveal that the proposed technique can save the energy consumption of the WLAN device up to 8.5 times with QVGA multimedia contents, as compared with no power control.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.231-232
• /
• 2011

It is very important thing to efficiently utilize the solar power. The conventional solar power system has no energy storage device. So the conventional system cannot cut the peak load. In this paper, the solar power system with the energy storage device and the operation algorithm of peak cut function was proposed to cut the peak load. The algorithm principle is proposed based on the insolation curve and load curve. The simulation and experiment was performed to demonstrate the validity of the peak cut algorithm.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.6
• /
• pp.523-531
• /
• 2012

This paper proposes a high efficiency power conversion system for battery-ultracapacitor hybrid energy storages. The proposed system has only one bidirectional dc-dc converter for hybrid power source with batteries and ultracapacitors. The hybrid power source has bidirectional switching circuits for selecting one energy storage device. Bidirectional power flow between the energy storage device and high voltage capacitor can be controlled by one bidirectional converter. An asymmetrical switching method is applied to the bidirectional converter for high power efficiency. Switching power losses are reduced by zero-voltage switching of power switches. System operation and design considerations are presented. The experimental results are provided to verify the performance of the proposed system.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.31-34
• /
• 2005

Mobile devices, such as PDAs, portable multimedia players, are more likely to encompass large storage devices with prevalance of high-quality multimedia contents. This paper proposes an object-based multimedia contents storage architecture that employs the object-based storage device model and the iSCSI protocol. It also provides a multimedia content player that operates directly with the proposed storage architecture. We implement both the proposed storage architecture and the multimedia content player upon the Linux environment. Performance evaluation by playing MP3 multimedia contents reveals that the proposed storage architecture reduces the total power consumption by 9%, compared with an existing networked storage. This enhancement is mainly contributed to the fact that a large portion of the file system is moved into the object-based multimedia contents storage from the mobile device.