• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.6
• /
• pp.257-262
• /
• 2015

Recently the world wide efforts reduce occurrence of $CO_2$; global warming main reason. The aim of this study is to improve recycling rate of the fly ash (FA) and fused waste slag (FWS) from the power plant and to carbonate under supercritical condition ($40^{\circ}C$, $80kgf/cm^2$ pressure, 60 min) for $CO_2$ fixation. Specimens of mortar with various mixing ratios of FA, FWS (from 100:0 to 20:80 in 5 steps of 20 % reduction each time), distilled water and 3 M NaOH alkali activators were prepared. As a result, the proportion of weight change ratio increases with CaO content, to 12 % after carbonation under the supercritical condition. There is difference of compressive strength between the carbonated and the alkali activator mortar specimens. The stabilization of $CO_2$ fixation through carbonation which could confirm the applicability of the eco-friendly materials without loss of compressive strength.

• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.895-904
• /
• 2012

Today, the competition for hub-port is getting fierce and the shipping liners have enjoyed the increased bargaining power over the terminal operators through the mergers & acquisitions (M&A) and strategic alliances. This result leads the competition among terminal operators to attract liner companies and cargoes in their terminals. In demand side, however, there is a limited container cargo volume to handle because of a steady growth of cargo traffic. While, in supply side, continuous development of port terminals increased more competition among ports or terminals for cargoes. In particular the terminal operating market of Busan port is distorted because of the cargo competition between Busan North-port and Newport. The main purpose of this study is to suggest the stabilization measures of container terminal operating market in Busan port through analysis of the terminal operation market structures and market survey analysis method. For stabilizing the container terminal market, this study suggests the improvement of the legal and institutional system such as improvement in determining and reporting system of stevedoring tariff, establishment of fair competition rules etc., the introduction of port pooling system and adoption of volume-linked terminal lease system with cargo volume ceiling system for each terminal operator.

• Korean Journal of Ecology and Environment
• /
• v.47 no.3
• /
• pp.225-231
• /
• 2014

Discharge measurement during flood season is very difficult. Microwave water surface current meter (MWSCM) can measures river surface velocities easily without contacting water. This study introduces its improved version, MWSCM for general use. The existing version of MWSCM is for floods so that its applicable period in a year is short. It has been improved to extend its applicability in a year. The range of measurable velocity for MWSCM for general use is extended so it can be applied during normal flows as well as high flows. MWSCM for general use can measure the velocity range of $0.03{\sim}20.0ms^{-1}$, whereas MWSCM for floods can measure the velocity range of $0.5{\sim}10.0ms^{-1}$. To make such innovation of MWSCM for general use, the applied microwave frequency of MWSCM was changed from 10 GHz to 24 GHz. Waveguide slot array antenna has been designed with the new development of the circuit of transmitting and receiving part. Improvement requests on the existing MWSCM for floods - weight lightening, measured velocity stabilization, self-test, low power consumption, and waterproof and dampproof - from the users of it have been reflected for the development of the new version of MWSCM.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.287-294
• /
• 2005

In this paper, an optical true time-delay (TTD) for two-dimensional (2-D) phased array antennas (PAAs), composed of a multi-wavelength optical source and a fiber optic delay line matrix consisting of $2\times2$ optical switches with optical fiber connected between cross ports, has been proposed. A 2-bit $\times4-bit$ optical TTD for 10-GHz 2-D PAAs has been implemented by cascading a wavelength dependent TTD (WD-TTD) and a wavelength independent TTD (WI-TTD). The unit time delay for WD-TTD and WI-TTD have been chosen as ${\Delta}T=12ps$ and $\Delta\tau=6ps$, respectively. Time delay have been measured at all radiation angles. The maximum delay error for WD-TTD was measured to be 3 ps due to jitter incurred from gain switching. For the case of WI-TTD, error was within ${\pm}\;1\;ps$. The proposed optical TTD for a 2-D PAA has the following advantages: 1) higher gain compared to one-dimensional linear PAAs, 2) stabilization of optical power and wavelength by using a multi-wavelength optical source, and 3) fast beam scan and simple operation due to electronic control of the $2\times2$ optical switches matrix on a column-by-column basis.

• The Journal of Fisheries Business Administration
• /
• v.42 no.2
• /
• pp.113-130
• /
• 2011

The laver has been cultivated long time ago by Korea and Japan. Korean Laver Industry has been influenced by Japan on the many factors since 20th. Nevertheless now the both country showed widening disparities across the aspect of total Laver Industry each other. The development steps of Korea and Japan Laver Industry have been advanced differently. That is, we can keep the Laver Industry development steps of both countries separate by 4 steps. But insignificant of every step against both countries has been dissimilar. We can separate from 4 steps in Korea, 1 step is origin period from beginning of laver cultivation to 1961. Next step is First Development period from 1962 to 1978. This period come out production increase from about 10,000 tons early 1960 to 50,000 tons late 1970. Next step is Second Development period from 1979 to 2000. This period come out eminent production increase from about 50,000 tons early 1980 to 200,000 tons late 1990. Next step is Stabilization period from 2001 to now. This period come out production control the size of its production and enlargement of Laver Export. We can also separate from 4 steps in Japan, 1 step is origin period from beginning of laver cultivation to 1944. Next step is Development period from 1945 to 1975. This period come out production increase from about 4 billion sheets early 1960 to 8.5 billion sheets 1975. Next step is Peak period from 1976 to 1982. This period come out sustainable production peak by 6~8 billion sheets and high price. Next step is Decline period from 1983 to now. This period come out production control the size of its production and sustainable price down. These differences showed out facing problems of Korean and Japanese Laver Industry differently. In case of Korea, the facing problems show out 3. First is structural problem, for example, trouble between original laver producer and the finished producer by dry laver products. Second is Insufficiency of Plants Protection System. Third is low quality of Laver. In case of Japan, the facing problems also show out 3. First is sustainable decrease of laver consumption. Second is change of mind against laver, for example, the change of the propensity to consume, and decrease of brand power. Third is Influence of global system. The difference of development steps of Korea and Japan Laver Industry show out 2 point of view to us. First we need consider positive strategy against laver production system of enlargement. Second, we need consider separate strategy against high quality laver and low quality laver.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.1
• /
• pp.13-19
• /
• 2016

Soft ground stabilization is needed to construct large civil facilities on the soft clay ground. Pre-loading method, which is accelerating consolidation method, is generally used to stabilize the soft ground. However, pre-loading method is required long construction period and quantities of fill material. Therefore, electro-osmosis method is used to replace pre-loading method for stabilizing the soft ground. Electro-osmosis method is disadvantageous in constructive and economic aspects because it is needed a metallic electrode. So, in order to solve the those disadvantages, plastic electrode was developed to replace metallic electrode. Plastic electrode, which is made by using nano-technology on existing Plastic Drain Board (PDB), was used to supply the electric power. In this study, therefore, the model test was conducted to confirm the effect of improvement and electrical characteristics of soft ground by spacing of plastic electrode. The result shows that the effect of improvement of soft ground was decreased up to 45% by increasing electrode spacing and electrical characteristics on the soft ground were influenced by consolidation settlement with electrode spacing.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.3
• /
• pp.478-485
• /
• 2014

This study is to form the self assembly of cubic crystalline phase to penetrate into the skin epidermis. The various performance synthesized diglyceryl phytylacetate (DGPA) having hydroxyl group (-OH) and 4 methyl chains with phytyl group was carried out as an amphoteric lipid such as emulsifying power, self assembly. Emulsifying activity of DGPA was very stabilized on only 1% of small content, it could make a W/O emulsion containing high internal phase incorporated with water. Cubic liquid crystal structure with DGPA on three-phase diagram was formed, when mixed DGPA, dimethicone (2CS), and water. Through three-phase diagram forming the cubic liquid crystal area, hexagonal structure zone, and mixing water phase and hexagonal structure area, reversed micelle area were respectively certified. Its structure was proved by the SAXS (small angled x-ray scattering) analysis. As an application, formation of cubosome containing 10% of magnesium ascorbylphosphate and 5% of pyridoxine tris-hexyldecanoate was encapsulated. Occlusive effect of cubosome had above 1.7 times better than reversed micelle. From using poloxamer of dispersing agent, phase structure recovered from W/O emulsion to cubic liquid crystal phase when storage in $33^{\circ}C$ incubator. Therefore, our this study is expected to be as epidermal-dermal skin absorbers in skin care cosmetics and pharmaceuticals industries as raw materials to form a cubic crystal phase through a more in-depth research to DGPA having amphoteric lipid property.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.1
• /
• pp.19-26
• /
• 2021

The purpose of this study is to provide an environment that can support the development of the virtual asset industry. The limiting factors and countermeasures currently possessed by the virtual asset industry were considered in terms of legal and institutional aspects, technical aspects, and market aspects.Small businesses classified as virtual asset operators have difficulty meeting the government's requirements.Accordingly, SMEs with insufficient funds and manpower are withdrawn from the market, creating an environment where only large-scale enterprises with capital power survive.It is difficult to develop desirable technologies and markets in the virtual asset technology industry. In addition, small and medium-sized companies may be expelled from the market, causing damage to current users. Therefore, in terms of legal and institutional aspects, there is a lack of an exact scope of virtual asset providers, and thus it is necessary to respond to the controversial elements of virtual asset providers. In terms of technology, it is necessary to cope with the slowdown of the P2P method, the difficulty in recovering errors, and the absence of operational experts. Therefore, technology standardization and stabilization are required, and efforts must be made to cultivate operational technical personnel who can support them.In terms of the market, it is necessary to prepare measures to protect users of virtual assets and to establish countermeasures for companies operating virtual assets against weak user protection, inadequate application of the AML method, and limitations of taxation. This study is expected to contribute to active utilization support or related policies in the virtual asset industry.

• Clean Technology
• /
• v.27 no.1
• /
• pp.69-78
• /
• 2021

Vegetable oils, such as palm oil and cashew nut shell liquid (CNSL), are used as major raw materials for bio-diesel in transportation and bio-heavy oil in power generation in South Korea. However, due to the high unsaturation degree caused by hydrocarbon double bonds and a high content of oxygen originating from the presence of carboxylic acid, the range of applications as fuel oil is limited. In this study, hydrotreating to saturate unsaturated hydrocarbons and remove oxygen in mixed bio-oil containing 1/1 v/v% palm oil and CNSL on monometallic catalysts (Ni and Cu) and bimetallic catalysts (Ni-Zn, Ni-Fe, Ni-Cu Ni-Co, Ni-Pd, and Ni-Pt) was perform under mild conditions (T = 250 ~ 400 ℃, P = 5 ~ 80 bar and LHSV = 1 h-1). The addition of noble metals and transition metals to Ni showed synergistic effects to improve both hydrogenation (HYD) and hydrodeoxygenation (HDO) activities. The most promising catalyst was Ni-Cu/��-Al2O3, and in the wide range of the Ni/Cu atomic ratio of 9/1~1/4, the conversion for HYD and HDO reactions of the catalysts were 90-93% and 95-99%, respectively. The tendency to exhibit almost constant reaction activity in these catalysts of different Ni/Cu atomic ratios implies a typical structure-insensitive reaction. The refined bio-oil produced by hydrotreating (HDY and HDO) had significantly lower iodine value, acid value, and kinetic viscosity than the raw bio-oil and the higher heating value (HHV) was increased by about 10%.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.4
• /
• pp.333-340
• /
• 2021

In this study, Rosa multiflora was sampled through extraction, concentration, and freezing. The antioxidant efficacy of a mixture of R. multiflora extract and ascorbic acid was compared with a single ascorbic acid. The purpose of this study was to analyze the antioxidant efficacy through the synergistic effect of R. multiflora extract and ascorbic acid. The experiment measured electron donating ability, ABTS+ radical scavenging, SOD-like activity, xanthine oxidase inhibition activity, reducing power, FRAP, polyphenolic content measurement, and flavnoid content measurement. As a result, the complex showed higher antioxidant activity than the control group (ascorbic acid) in the electron donating ability test and the xanthine oxidase inhibitory activity test. In the case of the flavonoid content experiment, it was confirmed that RMW+A (272.1 mg QE/g), RME+A (90.6 mg QE/g), and RMW+A (79.4 mg QE/g) at a concentration of 100 ㎍/mL had a higher flavonoid content than the control group (19.0 mg QE/g). Therefore, the extract and ascorbic acid complex exhibited a synergistic effect compared to the single use. Therefore, it is thought that this complex will contribute to product stabilization and skin aging inhibition when used in antioxidant cosmetics.