• 제목/요약/키워드: Power Splitting

검색결과 159건 처리시간 0.036초

플라즈마 계단형 다중모드 간섭 결합기의 모드 특성 (Modal Characteristics of Plasmonic Multimode Interference Couplers with Stepped Structure)

  • 호광춘
    • 한국인터넷방송통신학회논문지
    • /
    • 제13권2호
    • /
    • pp.47-52
    • /
    • 2013
  • 플라즈마 다중모드 간섭 결합기 (MMIC)를 계단형으로 구성하여 전형적인 방법으로 설계된 MMIC 보다 결합길이를 현저하게 줄일 수 있는 새로운 구조가 본 논문에서 제안되었다. 전송폭이 계단형인 플라즈마 MMIC에서 60%의 cross 전력분배율에 대하여, 결합길이는 약 42%가 줄어들었다. 또한, 굴절률 변화에 따른 플라즈마 MMIC의 전력분배율과 결합길이는 약 2~6%로 거의 변화가 없었으나, 전송폭을 변화 시켰을 때 전력분배율과 결합길이는 약 30~40%로 큰 변화를 나타내었다.

Photoelectrochemical cells based on oxide semiconductors

  • 윤영대;백승기;김주성;김영빈;조형균
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2018년도 춘계학술대회 논문집
    • /
    • pp.50.2-50.2
    • /
    • 2018
  • The demand for steady and dependable power sources is very high in the field of sustainable energy because of the limited amount of fossil fuels reserves. Among several sustainable alternatives, solar energy may be the most efficient solution because it constitutes the largest renewable energy source. So far, the only practical way to store such large amounts of energy has been to use a chemical energy carrier likewise a fuel. In various solar energy to power conversion systems, the photoelectrochemical (PEC) splitting of water into hydrogen and oxygen by the direct use of solar energy is an ideal process. It is a renewable method of hydrogen production integrated with solar energy absorption and water electrolysis using a single photoelectrode. Previous studies on photoelectrode films for PEC water splitting cells have been mainly focused on synthesizing oxide semiconductors with wide band gaps, such as TiO2(3.2eV), WO3(2.8eV), and Fe2O3(2.3eV). Unfortunately, these pristine oxide photoanodes without any catalysts have relatively low photocurrent densities because of the inherent limitation of insufficient visible light absorption due to the wide bandgap. Specifically, there is a tradeoff between high photocurrent and photoelectrochemical corrosion behavior, which is representative of figures of meritf or PEC materials.

  • PDF

광전기화학적 물 산화용 산화아연 나노막대 광양극의 합성 및 특성평가 (ZnO Nanorod Array as an Efficient Photoanode for Photoelectrochemical Water Oxidation)

  • 박종현;김효진
    • 한국재료학회지
    • /
    • 제30권5호
    • /
    • pp.239-245
    • /
    • 2020
  • Synthesizing one-dimensional nanostructures of oxide semiconductors is a promising approach to fabricate highefficiency photoelectrodes for hydrogen production from photoelectrochemical (PEC) water splitting. In this work, vertically aligned zinc oxide (ZnO) nanorod arrays are successfully synthesized on fluorine-doped-tin-oxide (FTO) coated glass substrate via seed-mediated hydrothermal synthesis method with the use of a ZnO nanoparticle seed layer, which is formed by thermally oxidizing a sputtered Zn metal thin film. The structural, optical and PEC properties of the ZnO nanorod arrays synthesized at varying levels of Zn sputtering power are examined to reveal that the optimum ZnO nanorod array can be obtained at a sputtering power of 20 W. The photocurrent density and the optimal photocurrent conversion efficiency obtained for the optimum ZnO nanorod array photoanode are 0.13 mA/㎠ and 0.49 %, respectively, at a potential of 0.85 V vs. RHE. These results provide a promising avenue to fabricating earth-abundant ZnO-based photoanodes for PEC water oxidation using facile hydrothermal synthesis.

Modified Wilkinson Power Divider Using Transmission Lines for Various Terminated Impedances and an Arbitrary Power Ratio

  • Yoon, Young-Chul;Kim, Young
    • Journal of electromagnetic engineering and science
    • /
    • 제19권1호
    • /
    • pp.42-47
    • /
    • 2019
  • This paper introduces a modified Wilkinson power divider that uses uniform transmission lines for various terminated impedances and an arbitrary power ratio. For the designed power ratio, the proposed divider changes only the electrical lengths of the transmission lines between the input and output ports, and those between the output ports and the isolation resistor. In this case, even when various termination impedances of the ports exist, the divider characteristics are satisfied. To verify the feasibility of the proposed divider, two circuits were designed to operate at a frequency of 2 GHz with 2:1 and 4:1 power splitting ratios and various terminated impedances of 40, 70, and $60{\Omega}$ for one circuit, and 50, 70, and $60{\Omega}$ for the other. The measurement and simulation results were in good agreement.

1축 인장 부재의 인장강성 및 부착길이 효과 (Tension Stiffening and Bond Length of Reinforced Concrete Members Subjected to Uniaxial Tension)

  • 조능호;정원기;강희철;서정문;전영선
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
    • /
    • pp.873-878
    • /
    • 2000
  • Tension stiffening effects of reinforced concrete member with large diameter bar, mainly used at reactor building of nuclear power plant, are studied by uniaxial structural tests. Bond length and stress of steel bar, size of steel bar, and compressive strength of concrete are evaluated to tension stiffening by uniaxial tests. Problems and solution during the uniaxial test are suggested. The prevent splitting cracks, concrete cover-to-bar diameter ratio $c/d_{b}$ is kept 2.6~2.8. Because the bond length is increased as the size of steel bar, the specimen length of the D35 steel bar is required at least 2.0 m. The specimen length must be decided with bond length as well as concrete cover-to-bar diameter ratio to prevent splitting crack.

이온교환법을 이용한 균등한 출력 파워를 갖는 $1{\times}5$ 광파워 분리기 ($1{\times}5$ Equal-Power Splitter Using Ion-Exchange Method)

  • 강동성;전금수;김희주;반재경
    • 대한전자공학회논문지SD
    • /
    • 제37권11호
    • /
    • pp.43-49
    • /
    • 2000
  • 본 논문에서는 1.55${\mu}m$파장에서 동작하는 $1{\times}5$ 광파워 분리기를 유한 차분 빔전파법(FD-BPM)을 이용하여 모델링하고, BK7 유리 기판에 $Ag^+-Na^+$ 이온교환법을 이용하여 제작하였다. 제작된 소자는 중심 도파로의 이격 거리와 내부 Y-분리기의 분리 각을 조절해 원하는 분리 비를 얻을 수 있는 구조로 되어있다. 도파로 폭 4.5${\mu}m$, 내부 Y-분리기의 분리 각 0.3$^{\circ}$, 중심 도파로의 이격 거리가 575${\mu}m$일 때 TE 모드 입력에 대해 0.46dB의 광파워 분리 비를 얻었다.

  • PDF

두 성분을 이용한 전력품질 신호의 압축 및 복구 (Power Quality Signal Compression and Restoration based on Two Component)

  • 정영식;김철
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
    • /
    • pp.125-126
    • /
    • 2006
  • Data storage and data communication currently pose a major problems for all parties involved with power quality and power system monitoring. The Problem aries from the tremendous amount of data involved. There is a common desire in the power industry to find new techniques for high-accuracy data compression and data storage. This paper introduces a data compression technique that is very suitable for application to power quality waveforms. The proposed technique is applied in splitting the monitored signal into two components. Those are stationary and nonstationary components. Each component is compressed and encoded.

  • PDF

Split Slant-End Stubs for the Design of Broadband Efficient Power Amplifiers

  • Park, Youngcheol;Kang, Taeggu
    • Journal of electromagnetic engineering and science
    • /
    • 제16권1호
    • /
    • pp.52-56
    • /
    • 2016
  • This paper suggests a class-F power amplifier with split open-end stubs to provide a broadband high-efficiency operation. These stubs are designed to have wide bandwidth by splitting wide open-end stubs into narrower stubs connected in shunt in an output matching network for class-F operation. In contrast to conventional wideband class-F designs, which theoretically need a large number of matching lines, this method requires fewer transmission lines, resulting in a compact circuit implementation. In addition, the open-end stubs are designed with slant ends to achieve additional wide bandwidth. To verify the suggested design, a 10-W class-F power amplifier operating at 1.7 GHz was implemented using a commercial GaN transistor. The measurement results showed a peak drain efficiency of 82.1% and 750 MHz of bandwidth for an efficiency higher than 63%. Additionally, the maximum output power was 14.45 W at 1.7 GHz.

전송률 분할 다중 접속 기술을 활용한 비면허 대역의 트래픽과 공정성 최대화 기법 (Unlicensed Band Traffic and Fairness Maximization Approach Based on Rate-Splitting Multiple Access)

  • 전장우;김승욱
    • 정보처리학회논문지:컴퓨터 및 통신 시스템
    • /
    • 제12권10호
    • /
    • pp.299-308
    • /
    • 2023
  • 다양한 서비스가 등장으로 인해 스펙트럼 부족 문제가 가속하됨에 따라, 면허 대역에서 통신하던 사용자들을 비면허 대역에서 통신하는 NR-U(New Radio-Unlicensed)가 등장하였다. 하지만 NR-U 네트워크 사용자로 인해 동일한 비면허 대역에서 통신하는 Wi-Fi 네트워크 사용자의 성능이 감소하게 된다. 본 논문에서는 NR-U 네트워크 사용자와 WiFi 네트워크 사용자가 공존해있는 비면허 대역의 처리량과 비면허 대역의 사용에 대한 공평성을 동시에 최대화하는 것을 목표로 한다. 먼저 비면허 대역에서 전송률 분할 다중 접속 기술을 활용한 NR-U 네트워크의 합-전송 속도 (Sum of Rate)를 최대화하기 위해 강화 학습의 몬테 카를로 정책 하강법(Monte Carlo Policy Gradient)을 활용한 최적의 전력 할당 기법을 제안하였다. 그 뒤, 동일한 비면허 대역에서 NR-U 네트워크와 WiFi 네트워크의 공존을 위해 시스템 처리량과 공정성을 동시에 최대화할 수 있는 게임 이론의 순차적 라이파 협상 해법(Sequential Raiffa Bargaining Solution)을 활용한 채널 점유 시간 분할 알고리즘을 제안하였다. 시뮬레이션 결과에서 동일한 전력 할당 기법을 사용하였을 때, 본 논문에서 제안한 전송률 분할 다중 접속 기술이 기존의 다중 접속 기술들보다 더 빠른 합-전송속도를 보임을 확인하였다. 또한 비면허 대역 네트워크의 전송량과 공평성을 비교해본 결과 본 논문의 순차적 라이파 협상 해법을 활용한 채널 점유 시간 분할 알고리즘이 타 알고리즘보다 처리량과 공정성을 동시에 만족함을 입증하였다.

Power Failure Sensitivity Analysis via Grouped L1/2 Sparsity Constrained Logistic Regression

  • Li, Baoshu;Zhou, Xin;Dong, Ping
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제15권8호
    • /
    • pp.3086-3101
    • /
    • 2021
  • To supply precise marketing and differentiated service for the electric power service department, it is very important to predict the customers with high sensitivity of electric power failure. To solve this problem, we propose a novel grouped 𝑙1/2 sparsity constrained logistic regression method for sensitivity assessment of electric power failure. Different from the 𝑙1 norm and k-support norm, the proposed grouped 𝑙1/2 sparsity constrained logistic regression method simultaneously imposes the inter-class information and tighter approximation to the nonconvex 𝑙0 sparsity to exploit multiple correlated attributions for prediction. Firstly, the attributes or factors for predicting the customer sensitivity of power failure are selected from customer sheets, such as customer information, electric consuming information, electrical bill, 95598 work sheet, power failure events, etc. Secondly, all these samples with attributes are clustered into several categories, and samples in the same category are assumed to be sharing similar properties. Then, 𝑙1/2 norm constrained logistic regression model is built to predict the customer's sensitivity of power failure. Alternating direction of multipliers (ADMM) algorithm is finally employed to solve the problem by splitting it into several sub-problems effectively. Experimental results on power electrical dataset with about one million customer data from a province validate that the proposed method has a good prediction accuracy.