• 제목/요약/키워드: Power Spectral density

검색결과 471건 처리시간 0.03초

거친외벽면을 가진 동심환형관내에서 완전히 발달된 유동의 난류구조 (Structure of turbulence of fully developed flow in concentric annuli with rough outer wall)

  • 안수환
    • 설비공학논문집
    • /
    • 제11권1호
    • /
    • pp.1-9
    • /
    • 1999
  • For roughened annular pipes with diameter ratios of 0.26, 0.39, and 0.56 and with Reynolds numbers ranging 13,000 to 67,000, friction factor, autocorrelation coefficients, power spectral density functions, and integral length scales for each flow condition using X-type hot wire anemometry system are experimentally investigated. Distributions of these quantities show that the times which the streamwise autocorrelation coefficients become zero first increase with decreasing the radius ratios of concentric annuli and Reynolds numbers, however the power spectra density functions increase with increasing the radius ratios and Reynolds number.

  • PDF

ISF와 Floquet 벡터에 기초한 발진기 위상잡음 이론의 등가성에 대한 해석적 증명 (Analytical Proof of Equivalence of ISF, and Floquet Vector-Based Oscillator Phase Noise Theories)

  • 전만영
    • 전기전자학회논문지
    • /
    • 제17권4호
    • /
    • pp.559-563
    • /
    • 2013
  • 본 논문에서는 ISF와 Floquet 벡터에 각각 기초하는 두 개의 주요한 발진기 위상잡음 이론의 등가성을 해석적으로 증명한다. 이를 위해 본 연구에서는 ISF에 기초하는 위상잡음 이론으로부터 전력 스펙트럼 밀도 행렬을 구한다. 이렇게 함으로써 ISF에 기초한 위상잡음 이론의 전력 스펙트럼 밀도 행렬과 Floquet 벡터에 기초한 위상잡음 이론의 전력 스펙트럼 밀도 행렬이 같다는 사실을 해석적으로 증명할 수 있으며 이는 두 이론이 본질적으로 등가임을 증명한다. 본 연구의 목적은 현재까지 널리 알려진 상기 두 위상잡음 이론사이의 관계에 대한 보다 깊은 통찰력을 제공하는데 있다.

Wind characteristics of Typhoon Dujuan as measured at a 50m guyed mast

  • Law, S.S.;Bu, J.Q.;Zhu, X.Q.;Chan, S.L.
    • Wind and Structures
    • /
    • 제9권5호
    • /
    • pp.387-396
    • /
    • 2006
  • This paper presents the wind characteristics of Typhoon Dujuan as measured at a 50 m guyed mast in Hong Kong. The basic wind speed, wind direction and turbulent intensity are studied at two measurement levels of the structure. The power spectral density of the typhoon is compared with the von Karman prediction, and the coherence between wind speeds at the two measurement levels is found to This paper presents the wind characteristics of Typhoon Dujuan as measured at a 50 m guyed mast in Hong Kong. The basic wind speed, wind direction and turbulent intensity are studied at two measurement levels of the structure. The power spectral density of the typhoon is compared with the von Karman prediction, and the coherence between wind speeds at the two measurement levels is found to compare with Davenport's prediction. The effect of typhoon Dujuan on the response of the structure will be discussed in a companion paper (Law, et al. 2006).with Davenport's prediction. The effect of typhoon Dujuan on the response of the structure will be discussed in a companion paper (Law, et al. 2006).

노면 상관도를 고려한 3차원 노면형상 생성에 관한 연구 (Generation of Three Dimensional Road Surface Profiles with Considering Coherence Relation)

  • 김광석
    • 한국산학기술학회논문지
    • /
    • 제10권5호
    • /
    • pp.917-922
    • /
    • 2009
  • 본 연구에서는 ISO, MIRA, 그리고 Wong에 의해 제안된 노면 PSD 함수를 기초의 3차원 노면의 생성 방법에 대해 연구하였다. 주어진 노면 거칠기 특성이 PSD 함수를 사용하여 2차원 노면을 생성한 뒤 상관도를 고려하여 횡방향으로 연속적으로 배치함으로써 실제 노면 특성에 유사한 3차원 노면을 생성하였다. 생성된 노면의 상관도를 평가한 결과 실제 노면의 상관도 특성과도 잘 일치함을 확인하였다. 또한, 3차원 노면을 자동으로 생성하기 위하여 반복적으로 횡방향 노면을 생성시켜 주는 프로그램을 개발하였다.

Coexistence of OFDM-Based IMT-Advanced and FM Broadcasting Systems

  • Shamsan, Zaid A.;Rahman, Tharek A.;Kamarudin, Muhammad R.;Al-Hetar, Abdulaziz M.;Jo, Han-Shin
    • ETRI Journal
    • /
    • 제33권2호
    • /
    • pp.279-282
    • /
    • 2011
  • Coexistence analysis is extremely important in examining the possibility for spectrum sharing between orthogonal frequency-division multiplexing (OFDM)-based international mobile telecommunications (IMT)-Advanced and other wireless services. In this letter, a new closed form method is derived based on power spectral density analysis in order to analyze the coexistence of OFDM-based IMT-Advanced systems and broadcasting frequency modulation (FM) systems. The proposed method evaluates more exact interference power of IMT-Advanced systems in FM broadcasting systems than the advanced minimum coupling loss (A-MCL) method. Numerical results show that the interference power is 1.3 dB and 3 dB less than that obtained using the A-MCL method at cochannel and adjacent channel, respectively. This reduces the minimum separation distance between the two systems, which eventually saves spectrum resources.

뇌파 스펙트럼 분석에 의한 마취 심도 지표 개발 (Development for the Index of an Anesthesia Depth using the Power Spectrum Density Analysis)

  • 예수영;백승완;김재형;박준모;전계록
    • 대한의용생체공학회:의공학회지
    • /
    • 제30권4호
    • /
    • pp.327-332
    • /
    • 2009
  • In this paper, new index was developed to estimate the depth of anesthesia during general anesthesia using EEG. Analysis of the power spectral density(PSD) of EEG was used to develop new parameters because EEG signal tends to have slow wave during anesthesia. Classifier for index creator was developed by using SEF, BDR and BTR parameters, which are calculated by power spectral density. EEG data were obtained from 7 patients (ASA I, II) during general anesthesia with Sevoflurane. The anesthetic depth evaluation indexes ranged from 0 to 100. The average were $86.05{\pm}10.1$, $36.98{\pm}20.2$, $15.33{\pm}13.6$, $50.87{\pm}16.5$ and $87.72{\pm}11.7$ for the states of pre-operation, induction of anesthesia, operation, awaked and post-operation, respectively. The results show that while the depth of anesthesia was evaluated, more accurate information can be provided for anesthetician.

Comparison of Signal Powers Generated with Different Shapes of Hammer Plates

  • Jeong, Ji-Hyun;Kim, Jin-Hoo
    • 한국지구과학회지
    • /
    • 제33권5호
    • /
    • pp.395-400
    • /
    • 2012
  • One of the main problems concerning the shallow seismic survey is how to generate high frequency signals with large amplitudes using small seismic sources. If one could focus the seismic energy in the direction of the survey line, it will be much helpful in identifying the first break. In this research, we have used hammer as an impulsive source and compared the signal powers generated by different shapes of the hammer plates: circular, square, and rectangular. The experiment was conducted by calculating the power spectral density function to compare the frequency spectrum and signal power. In the direction perpendicular to the long side of the rectangular plate, the largest seismic energy with the highest frequency was achieved even with the same weights of hammer plates. Our conclusion is that it is more efficient to use a rectangular plate than a circular (or square) one when conducting a 2-D shallow seismic survey.

전력 스펙트럼 밀도를 이용한 근전도 신호의 주파수 해석 (Frequency Analysis of EMG Signals using Power Spectral Density)

  • 박상희;변윤식
    • 대한의용생체공학회:의공학회지
    • /
    • 제6권1호
    • /
    • pp.19-30
    • /
    • 1985
  • This paper describes the EMG signals in frequency domain using power spectral density, The changes in the moan frequency can represent the energy distribution which results from changing in load before and during fatigue. Most of EMG signal power spectrum is located between 10 and 200Hz. Shifts of the high-energy regions of the power spectra can be inferred from the changes in the mean frequency. If the load is increased without fatigue-ocurring, the high frequency regions have more energy than the low frequency regions. And if load is increased during fatigue, the low frequency regions have more energy than the high frequency regions.

  • PDF

Optimization and Characterization of Gate Electrode Dependent Flicker Noise in Silicon Nanowire Transistors

  • Anandan, P.;Mohankumar, N.
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권4호
    • /
    • pp.1343-1348
    • /
    • 2014
  • The low frequency noise in Silicon Nanowire Field Effect Transistors is analyzed by characterizing the gate electrode dependence on various geometrical parameters. It shows that gate electrodes have a strong impact in the flicker noise of Silicon Nanowire Field effect transistors. Optimization of gate electrode was done by comparing different performance metrics such a DIBL, SS, $I_{on}/I_{off}$ and fringing capacitance using TCAD simulations. Molybdenum based gate electrode showed significant improvement in terms of high drive current, Low DIBL and high $I_{on}/I_{off}$. The noise power sepctral density is reduced by characterizing the device at higher frequencies. Silicon Nanowire with Si3N4 spacer decreases the drain current spectral density which interms reduces the fringing fields there by decreasing the flicker noise.

Generation of inflow turbulent boundary layer for LES computation

  • Kondo, K.;Tsuchiya, M.;Mochida, A.;Murakami, S.
    • Wind and Structures
    • /
    • 제5권2_3_4호
    • /
    • pp.209-226
    • /
    • 2002
  • When predicting unsteady flow and pressure fields around a structure in a turbulent boundary layer by Large Eddy Simulation (LES), velocity fluctuations of turbulence (inflow turbulence), which reproduce statistical characteristics of the turbulent boundary layer, must be given at the inflow boundary. However, research has just started on development of a method for generating inflow turbulence that satisfies the prescribed turbulence statistics, and many issues still remain to be resolved. In our previous study, we proposed a method for generating inflow turbulence and confirmed its applicability by LES of an isotropic turbulence. In this study, the generation method was applied to a turbulent boundary layer developed over a flat plate, and the reproducibility of turbulence statistics predicted by LES computation was examined. Statistical characteristics of a turbulent boundary layer developed over a flat plate were investigated by a wind tunnel test for modeling the cross-spectral density matrix for use as targets of inflow turbulence generation for LES computation. Furthermore, we investigated how the degree of correspondence of the cross-spectral density matrix of the generated inflow turbulence with the target cross-spectral density matrix estimated by the wind tunnel test influenced the LES results for the turbulent boundary layer. The results of this study confirmed that the reproduction of cross-spectra of the normal components of the inflow turbulence generation is very important in reproducing power spectra, spatial correlation and turbulence statistics of wind velocity in LES.