• 전력전자학회논문지
• /
• 제11권3호
• /
• pp.193-200
• /
• 2006

본 논문에서는 효율을 개선하고 인버터 스위칭 주파수를 줄이기 위하여 벅-부스트 형식을 기반의 PWM 전류형 인버터를 내장한 6-pulse-shift 컨버터 구조를 제안한다. 이는 에너지 저장장치 없이 태양광 시스템과 전력계통 사이를 연계하는 시스템으로 사용할 수 있다. 제안된 회로는 초퍼로 동작하는 6개의 전류형 벅-부스트 컨버터와 교류 출력의 극성을 결정하는 한 개의 전파 브리지 인버터로 구성된다. 따라서 제안된 인버터는 스위칭 손실을 줄이고 단위 역률운전을 구현하는 장점을 갖는다. 본 논문에서 이론적인 배경을 논하고 TMS320F2812를 사용하여 구현된 인버터 시작품에 대한 입출력 특성을 실험적으로 입증하였다.

• 한국통신학회논문지
• /
• 제17권10호
• /
• pp.1147-1156
• /
• 1992

본 논문에서는 $\pi/4$ shift QPSK에 Trellis 부호화된 변조 기법(Trellis-Coded Modulation. TCM)을 적용시키기위하여 $\pi/8$ shift 8PSK를 제안하고 위상차에 의한 신호 집합 확장과 신호 집합 분할을 수행하는 trellis 부호화된 π/8 shift 8PSK를 제안한다. 또한 BER(Bit Error Rate) 성능을 향상시키기위하여 제1차 위상차뿐만아니라 제L차 이상차의 자승 유클리드 거리를 매트릭(Branch Metric)으로 갖는 비터비 디코더(Viterbi decoder)를 설계한다. 그리고 $\pi/4$ shift QPSK, trellis 부호화된 $\pi/8$ shift 8PSK와 제L차 위상차의 자승 유클리드 거리를 메트릭(Branch Metric)으로 갖는 trellis 부호화된 $\pi/8$ shift 8PSK 의 BER 특성을 AWGN에서 Monte Carlo 시뮬레이션을 통해 알아본다. 제안된 알고리즘은 MDPSK에도 적용될 수 있다.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1245-1255
• /
• 2016

The single resonant inverter is widely employed in typical inductive power transfer (IPT) systems to generate a high-frequency current in the primary side. However, the power capacity of a single resonant inverter is limited by the constraints of power electronic devices and the relevant cost. Consequently, IPT systems fail to meet high-power application requirements, such as those in rail applications. Total harmonic distortion (THD) may also violate the standard electromagnetic interference requirements with phase shift control under light load conditions. A power regulation approach with selective harmonic elimination is proposed on the basis of a parallel multi-inverter to upgrade the power levels of IPT systems and suppress THD under light load conditions by changing the output voltage pulse width and phase shift angle among parallel multi-inverters. The validity of the proposed control approach is verified by using a 1,412.3 W prototype system, which achieves a maximum transfer efficiency of 90.602%. Output power levels can be dramatically improved with the same semiconductor capacity, and distortion can be effectively suppressed under various load conditions.

• 한국통신학회논문지
• /
• 제21권2호
• /
• pp.483-494
• /
• 1996

In this paper, we proposed the receive decoder and Virterbi algorithm with sliding multiple symbol detection using MLSE. the informationis transmitted by the phase difference of the adjacent channel signal at the .pi./4 shift QPSK. In order to apply the .pi./4 shift QPSK to TCM, we use the signal set expansion and the signal set partition by the phase differences. And the Viterbi decoder containing branch mertrice of the squared Euclidean distance of the first, second and Lth order phase difference is introduced in order to extract the information in the differential detection of the Trellis-Coded .pi./4 shift QPSK. The proposed Viterbi decoder and receiver are conceptually same to the sliding multiple symbol detection method using the MLSE. By uisng this method, the study shows that the Trellis-Coded .pi./4 shift QPSK is an attractive scheme for the power and the bandimited systems while also improving the BER performance when the Viterbi decoder is employed to the Lth order phase difference metrics.

• 전기학회논문지P
• /
• 제67권2호
• /
• pp.82-89
• /
• 2018

This paper presents a novel prototype of dual mode control based phase shift ZVS PWM high frequency load resonant inverter with lossless snubber capacitors in addition to a single active auxiliary resonant snubber for electromagnetic induction heating(IH) foam metal based consumer fluid dual packs(DPA) heater. The operating principle in steady state and unique features of this voltage source soft switching high frequency inverter circuit topology are described in this paper. The lossless snubber and auxiliary active resonant snubber assisted constant frequency phase shift ZVS PWM high frequency load resonant inverter employing IGBT power modules actually is capable of achieving zero voltage soft commutation over a widely specified power regulation range from full power to low power. The steady state operating performances of this dual mode phase shift PWM series load resonant high frequency inverter are evaluated and discussed on the basis of simulation and experimental results for induction heated foam metal heater which is designed for compact and high efficient moving fluid heating appliance in the consumer pipeline systems.

• 전력전자학회논문지
• /
• 제7권5호
• /
• pp.443-452
• /
• 2002

수 백 Watt 급의 통신용 장비 등에 적합하도록 고안된, 직렬 연결된 두 개의 트랜스포머를 갖는 새로운 위상천이 풀 브릿지 컨버터를 제시한다. 제안된 회로의 장점은 넓은 입력 범위를 가지며, 경부하에서도 스위치의 영전압 조건을 보다 쉽게 만족시킬 수 있다는 점, 그리고 작은 출력 변동율을 갖는다는 점 등이다. 뿐만 아니라, 직렬로 연결된 두 개의 트랜스포머가 번갈아 가면서 주 트랜스포머로서의 역할과 출력 인덕터로서의 역할을 함께 수행하므로, 출력측에서는 인덕터없이 필터링이 가능하게 되고, 따라서 고전력밀도의 컨버터를 제작할 수 있게 된다. 모드 해석과 대신호 모델링을 통한 설계식의 유도, 그리고 실험 결과를 보여줌으로써 제안된 컨버터를 검증한다.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.45-55
• /
• 2018

It is usually difficult for dual-active-bridge (DAB) dc-dc converters to operate efficiently at light loads. This paper presents an in-depth analysis of a DAB with triple-phase-shift (TPS) control under the light load condition to overcome this problem. A kind of operating mode which is suitable for light load operation is analyzed in this paper. First, an analysis of the zero-voltage-switching (ZVS) constraints for the DAB converter has been carried out and a reasonable dead-band setting method has been proposed. Secondly, the basic operating characteristics of the converter are analyzed. Third, under the condition of satisfying the ZVS constraints, both the reactive power and the root mean square (RMS) value of the current are simultaneously minimized and a particle swarm optimization (PSO) algorithm is employed to analyze and solve this optimization problem. Lastly, both simulations and experiments are carried out to verify the effectiveness of the proposed method. The experimental results show that the converter can effectively achieve ZVS and improved efficiency.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2000
• /
• pp.215-223
• /
• 2000

In this study, the effect of stiffness ratio between base frame and anchorgae is evaluated and the seismic verification of nuclear power plant equipment anchorage is performed for typical equipment. The stiffness ratio between base frame and anchorage is mainly controlled by the effective height of side wall plate. And, the change of that stiffness ratio cause the large shift or ovreturning axis of equipment base. This shift of overturning axis of equipment base is able to reduce the factor of safety about 10%. Therefore, the adequate method for evaluating of effective height of side wall is required as further study.

• 전자공학회논문지A
• /
• 제33A권6호
• /
• pp.178-188
• /
• 1996

In this paper, we propose a new opto-digital object recognition system which has rotation, scale, and shift invariant characteristics. The fourier power spectrum of the object image is modified to get shift invariance. The log-polar transform is used for rotation and scale invariance. And the decision of similarities is performed by nonlinear joint transform correlator (NJTC) that can control the ratio of phase and amplitude signals. Experimental verification of th eproposed optical object recognition system is presented.

• 대한기계학회논문집A
• /
• 제32권7호
• /
• pp.561-568
• /
• 2008

The quality of the automatic transmission shift for a wheel loader has been generally evaluated by driver's perception. However the subjective evaluation of the drivers is not always directly related to the shift quality. It is necessary to set up the method for an objective assessment of the shift quality. In this paper, a quantitative assessment method has been developed for the shift quality of the automatic transmission in a wheel loader. The indices for the evaluation were selected through the various tests like the acceleration and the turbine rpm as well as the subjective evaluation of the driver, and were validated by the correlation between subjective and objective assessments using a psychophysical power law. Based on this method, the shift quality of a wheel loader has been evaluated quantitatively under various shift conditions.