• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.30 no.3
• /
• pp.1-8
• /
• 2016

In this paper, we proposed a new driving scheme to reduce the motion blur and save the power for OLEDs(organic light emitting diodes). We adopted a DVS (dynamic voltage scaling) method to reduce power consumption and the division of TV field to improve motion blur. In the proposed scheme, BEW (Blur Edge Width) was decreased to the ratio of 1/4 compared to the conventional scheme under the optimal conditions. In this scheme, the gray levels to which the DVS method can be applied were divided into much smaller groups depending on the number of subfields. Therefore, our scheme does not guarantee less power consumption for every image compared to the conventional scheme. However, the new scheme can move the gray levels adopting the DVS to higher gray levels. Thus, we can save power even when having images at high gray levels.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.109-111
• /
• 2003

최근 무선 네트워킹 장치들이 등장 하면서 제한된 배터리에 의존하는 무선 호스트들의 전력 절감은 중요한 이슈가 되었다. 특히 Ad­Hoc에서 배터리는 제한된 에너지를 제공하기 때문에 무선 호스트에 의해서 소모되어지는 에너지의 양을 감소시키기 위한 기술은 대단히 중요하다. 특히 MAC 과 라우팅 에서 전력 절감을 이루기 위한 논문들이 기존에 발표 되었다. 이 논문에서는 IEEE 802.11 표준의 DCF (Distributed Coordination Function) 에서의 전력 절감 메카니즘을 향상 시킨 논문 이다. DCF를 위한 IEEE 802.11 전력 절감 메카니즘에서는 비콘 간격 이라는 시간으로 나누어지며 또한 이러한 각각의 비콘 간격이 시작될 때 각각의 노드들은 ATIM 창 동안 깨어 있어야 한다. 물론 모든 노드는 같은 시간에 깨어 있기 위해서는 동기화 되는 것이 필요하다. ATIM 창 동안 노드들은 비콘 기간 동안 깨어 있는 상태로 있을 것인지를 결정하기 위해서 control packet을 교환 한다. 이러한 ATIM 창 크기는 각각의 노드들의 전력절감에 상당한 영향을 미친다. 따라서 이 논문은 ATIM 창 크기를 동적으로 증감시켜서 보다 에너지 효율을 발휘 하고자 하는 논문이다.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.343-346
• /
• 2007

Recently, many nations have released standard such as EN61000-3-2 to impose a limit on the harmonic current to prevent distortion of AC line and to save energy. Also, the limit on the harmonic current makes use of a trade barrier. Therefore, Power factor correction must have been suitable for a limit on the harmonic current. This paper presents AC servo motor drive to have merits of high power factor for Desk-Top Robot.

• The KIPS Transactions:PartC
• /
• v.14C no.6
• /
• pp.475-480
• /
• 2007

Recently, wireless networking devices that depend on the limited Battery and power-saving of wireless hosts became important issue. Batteries can provide a finite amount of energy, therefore, to increase battery lifetime, it is important to design techniques to reduce energy consumption by wireless hosts. This paper improved power saying mechanism in Distributed Coordination Function(DCF) of IEEE 802.11. In the IEEE 802.11 power saving mechanism specified for DCF, time is divided into so-called beacon intervals. At the start of each beacon interval, each node in the power saving mode periodically wakes up during duration called the ATIM Window. The nodes are required to be synchronized to ensure that all nodes wake up at the same time. During the ATIM window, the nodes exchange control packets to determine whether they need to stay awake for the rest of the beacon interval. The size of the ATIM window has considerably affected power-saving. This paper can provide more power-saving than IEEE 802.11 power saving mode because ATIM window size is efficiently increased or decreased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.8
• /
• pp.623-631
• /
• 2013

Wireless LAN (WLAN) interface is one of the major sources drastically depleting the battery power of mobile devices such as smartphones and tablets. Most commercial mobile devices employ a power saving technique putting their WLAN interface into a sleep state when there is no network traffic, and thereby, save the battery power. However, since an access point (AP) just transmits the packet(s) received from a server to the corresponding mobile device immediately, it may cause a problem that the mobile device constantly remains in an awake state so that its battery power is rapidly drained. In this paper, we point out this problem and propose a new scheme that can save the mobile device's battery power with an adaptive packet scheduling at the AP side. From the experimental results based on a testbed, we found that the proposed scheme outperforms existing schemes over 50% in terms of power saving.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.2
• /
• pp.85-91
• /
• 2012

In this paper, the large data processing and suitable FAT32 file system for industrial system using a PLC and CF memory was implemented. Most of PLC can't save the large data in user data memory. So it's required to the external devices of CF memory or NAND flash memory. The CF memory is used in order to save the large data of PLC system. The file system using the CF memory is NTFS, FAT, and FAT32 system to configure in various ways. Typically, the file system which is widely used in industrial data storage has been implemented as modified FAT32. The conventional FAT 32 file system was not possible for multiple writing and high speed data accessing. The proposed file system was implemented by the large data processing module can be handled that the files are copied at the 40 bytes for 1msec speed logging and creating 8 files at the same time. In a sudden power failure, high reliability was obtained that the problem was solved using a power fail monitor and the non-volatile random-access memory (NVSRAM). The implemented large data processing system was applied the modified file system as FAT32 and the good performance and high reliability was showed.

• Journal of Power Electronics
• /
• v.3 no.2
• /
• pp.81-89
• /
• 2003

The global electrical energy consumption is still rising and there is a steady demand to increase the power capacity, to produce, distribute and use the energy as0 efficient as possible and furthermore to set up incentives to save energy at the md-user. Two major technologies will play important roles to fulfill those targets. One is to change the electrical power production sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. The other is to use high efficiency power electronics in power systems for high efficiency and high performance applications. This paper discusses both areas, in particular the power electronic application in wind power integration.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.504-505
• /
• 2011

Decreasing actual greenhouse gas will be difficult if it is not solved addressed in architectural fields. Zero emission building or zero energy building, maximize the efficiency of energy, which means the building can operate by their own renewable energy facility without any other supplying. To be a zero emission building, a building needs realization of high efficiency low energy consumption, construction of building its own energy production facilities and lastly a power grid connection. According to increasing of DC load about TV, LED lighting, computer, IT in building for living and business, it is expected the save of energy when the system of AC power distribution change into the system of DC power distribution. Renewable energy exists a big different rate produced by outside environment. When electrical power overproduce, it can supply for system. Otherwise, if electrical power produce less, it can receive supply from system. Send and receive power can lead to zero to annual standard. This paper shows the simulation about efficient control of power conversion which is related to DC power distribution of architecture and DC output of renewable energy by using L-type converter.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1163-1164
• /
• 2007

At present, one of the big characteristics in electric power market in korea is unique seller but in the near future competitions are expected in the market. so additional service for the electric power are expected. Also with development of IT technology, remote inspection for power usage are possible so as consumption pattern analysis. KORAIL is one of the biggest consumer in electric power market so it is necessary to investigate power consumption pattern. This paper presents electric power rate definition program based on billing system database and also basic power rate optimization method. Base on the substation annual power usage DB data, the characteristic of the substation power consumption are investigated and effective electrical billing system are compared each other. Through this program it is verified that we can save more then several hundred million won for a year.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.3
• /
• pp.194-201
• /
• 2007

As the performance of the mobile terminal becomes higher, the power consumption gradually increases. As a result, power management is one of the most important issues in mobile system with battery. In this paper, we describe an DPM(Dynamic Power Management) using DVS(Dynamic Power Management) as a power management mechanism in Qplus operating system. DVS generally considers a specific device such as CPU, whereas we consider the relations with other hardware components as well as each component. We specially focus on the relation between CPU, memory and LCD devices. We also designs a kernel monitor to collect information to decide the policy for power management. According to the experimental results, the proposed method enables to save much power.