• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.567-569
• /
• 1997

A control system using a PLC has been developed for a single tower drier(STD) in a CANDU type nuclear power plant. This system will replace the existing STD control system which was implemented with mechanical timers and relays. The new control system makes it possible for an operator to perform more precise time and dew point control for the STD, thanks to the high efficiency and flexibility of the PLC. The operational cost for the control system is much reduced compared to the existing system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1217-1220
• /
• 1996

For the purpose of the good tracking to variable load demands of the thermal power plant, a decentralized multilevel control(DMC) scheme is presented. It is applied to the drum type boiler-turbine system which is simplified from Boryung T/P #1,2 model[4]. A linearized model is decomposed into three subsystems by means of linear transformation. Then the DMC based on such subsystem is designed. Simulation using Matlab-Simulink shows that the proposed algorithm works very well to the large step change of power demand.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.797-801
• /
• 2003

In this paper, a real-time communication method using a PICNET-NP (Plant Instrumentation and Control Network for Nuclear Power plant) is proposed with an analysis of the control network requirements of DCS (Distributed Control System) in nuclear power plants. The method satisfies deadline in case of worst data traffics by considering aperiodic and periodic real-time data and others.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.744-747
• /
• 2004

An electric precipitator in a thermal electric power plant is essential equipment for preventing air environment pollution. However, it is difficult for the existing control systems to make efficient effects on dust collection. This is because AVC and ERC consist of independent, separate systems in the existing systems. To solve this problem, we developed an intelligent distributed control system, which makes optimal control possible through connection operations between the control systems. In this paper, we analyzed system performance and fly ash reduction effects through the developed system structure, development contents and its actual application to power plant.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.7
• /
• pp.1314-1319
• /
• 2010

The excitation control system of an emergency diesel generator is classified as a kind of safety-related system. Compared with other control systems in a power plant, this system is required to be more reliable and have better performance. KEPCO Research Institute successfully developed the excitation control system for a diesel generator. This paper presents its field test results by using a real time simulator on a nuclear power plant.

• Tribology and Lubricants
• /
• v.29 no.1
• /
• pp.7-12
• /
• 2013

Turbine power control devices at a nuclear / thermoelectric power plant lead to failure by creating mechanical shocks and strong vibrations that are due to the strong elasticity of a spring and the inertia of the valve face during its rapid movement to block steam. To ensure durability of the turbine power control device, which is the main component in the power plant, it is necessary to develop a device that can prevent such vibrations. In this study, a cushion mechanism is added to the head of the hydraulic servo actuator, which is a turbine power control device. Moreover, the cushion mechanism, which includes various modifies shapes and orifices is investigated dynamically through modeling and simulations.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.804-806
• /
• 1998

Most of Instrumentation and control system in Nuclear Power Plant using analog equipment has a limitations in system designing and operation. So the network based PLC application to Nuclear Power Plant has been studied so far. This paper defines the configuration and method with Prototype which are to be applied to NPCS(NSSS Process Control System) of KNGR (Korea Next Generation Reactor). It is expected that Test result of NPCS Pototype will satisfy the essential requirements in designing KNGR.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.693-696
• /
• 1988

This paper is investigated on the improvement for steam temperature control at Boryung coal-fired drum boiler type thermal power plant. The steam temperatur control has been mainly operated by the feedback controllers. Automatic controllers are bounded and difficult. Because boiler system is nonlinear and the system time delay is very large. Optimal regulators including predictive feedforward and differentiate control are synthesized and some improved output results are presented.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.792-794
• /
• 1998

As the modern industrial processes become more complex, it is getting more difficult to model and control the processes. The PID controller has been widely used in power plant process control since its structure is simple and familiar to the field engineer. This paper describes the application of the PID controller developed DCS system in power plant.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2321-2323
• /
• 1998

A control system using a PLC has been developed for a dual tower drier(DTD) in a CANDU type nuclear power plant. This system will replace the existing DTD control system which was implemented with mechanical timers and relays. The new control system makes it possible for an operator to perform more precise time and dew point control for the DTD, thanks to the high efficiency and flexibility of the PLC. The operational cost for the control system is much reduced compared to the existing system.