• 제목/요약/키워드: Power Monitoring System

검색결과 1,942건 처리시간 0.031초

Mode identifiability of a cable-stayed bridge based on a Bayesian method

  • Zhang, Feng-Liang;Ni, Yi-Qing;Ni, Yan-Chun
    • Smart Structures and Systems
    • /
    • 제17권3호
    • /
    • pp.471-489
    • /
    • 2016
  • Modal identification based on ambient vibration data has attracted extensive attention in the past few decades. Since the excitation for ambient vibration tests is mainly from the environmental effects such as wind and traffic loading and no artificial excitation is applied, the signal to noise (s/n) ratio of the data acquired plays an important role in mode identifiability. Under ambient vibration conditions, certain modes may not be identifiable due to a low s/n ratio. This paper presents a study on the mode identifiability of an instrumented cable-stayed bridge with the use of acceleration response data measured by a long-term structural health monitoring system. A recently developed fast Bayesian FFT method is utilized to perform output-only modal identification. In addition to identifying the most probable values (MPVs) of modal parameters, the associated posterior uncertainties can be obtained by this method. Likewise, the power spectral density of modal force can be identified, and thus it is possible to obtain the modal s/n ratio. This provides an efficient way to investigate the mode identifiability. Three groups of data are utilized in this study: the first one is 10 data sets including six collected under normal wind conditions and four collected during typhoons; the second one is three data sets with wind speeds of about 7.5 m/s; and the third one is some blind data. The first two groups of data are used to perform ambient modal identification and help to estimate a critical value of the s/n ratio above which the deficient mode is identifiable, while the third group of data is used to perform verification. A couple of fundamental modes are identified, including the ones in the vertical and transverse directions respectively and coupled in both directions. The uncertainty and s/n ratio of the deficient mode are investigated and discussed. A critical value of the modal s/n ratio is suggested to evaluate the mode identifiability of the deficient mode. The work presented in this paper could provide a base for the vibration-based condition assessment in future.

RC잠수함을 이용한 해상풍력하부구조 모니터링 융합시스템 (Convergence system of offshore wind infrastructure monitoring using the RC submarine)

  • 방걸원;방상원;김용호
    • 한국융합학회논문지
    • /
    • 제6권6호
    • /
    • pp.177-183
    • /
    • 2015
  • 모형잠수함, 중계부 및 제어부를 포함하는 수중 탐사 장치. 모형잠수함이 촬영한 영상정보를 중계부를 통해 전송한다. 모형잠수함의 자세 및 속도를 제어하는 제어신호 또한 중계부를 통해 제어 한다, 모형잠수함은 수중환경을 촬영하여 영상을 중계부로 전송하고, 중계부는 제어신호를 수신하여 수중에서 자세 및 속도를 제어한다, 중계부는 부표에 결합되어 수면에서 부유하고 제어부와 모형잠수함 사이에서 영상신호와 제어신호를 중계하되, 제어부와는 무선통신을 수행한다. 모형잠수함과는 유도선을 통해 유선통신을 수행하는 것으로 부표에 설치된 중계부와 모형잠수함 간을 유선통신으로 연결함으로써 모형잠수함에 대한 분실의 위험 없이 원활하게 수중 탐사를 수행할 수 있다. 또한 중계부와 제어부 간을 무선통신으로 연결함으로써 수중탐사를 쉽고 용이하게 수행할 수 있다. 이런 모형잠수함과 무선통신 및 제어를 결합한 융합기술을 구현하였다.

센서 네트워크를 이용한 실내 공기질 관리 및 제어에 관한 연구 (A Study of Environment Monitoring System based on Sensor Network)

  • 김기태;김동일
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2010년도 추계학술대회
    • /
    • pp.389-392
    • /
    • 2010
  • 특수한 작업장이외의 주택실내나 일반 사무실 등에서의 공기오염 문제는 인간이 주거시설에 거주한 이례로 계속되어온 문제로서 그 대책이 시급하다. 쉽게 외부의 신선한 공기와 충분한 양의 환기로서 해결이 가능하나 사람이 계속해서 관리해 주기에는 불편한 상황이다. 네트워크상에서 센서 네트워크를 이용한다면 쉽게 관리 및 제어가 가능하다. 유비쿼터스 센서 네트워크는 부착된 태그와 센서로부터 사물 및 환경 정보를 감지, 저장, 가공, 전달하여 인간 생활에 폭넓게 활용되며, 환경오염에 대해서도 사람이 직접 측정 및 모니터링 하기 힘든 지역에 설치되어 활용되고 있다. 다른 네트워크에 비해 초소형, 저전력, 저비용으로 쉽게 구성 가능하기 때문에 꾸준히 연구되어지고 있으며 환경과 IT의 전략적 융합을 통한 그린 IT의 네트워크 접목 또한 중요한 연구분야로 조명되고 있다. 본 논문에서는 네트워크 기반하에 실내 공기질 관리를 구성하고 관리 및 제어하여 활용 방안에 대하여 제시한다.

  • PDF

CFD 해석을 적용한 18650 리튬-이온 배터리 팩의 열 해석 신뢰도 기초 분석 (Basic Investigation into the Validity of Thermal Analysis of 18650 Li-ion Battery Pack Using CFD Simulation)

  • 심창휘;김한상
    • 한국수소및신에너지학회논문집
    • /
    • 제31권5호
    • /
    • pp.489-497
    • /
    • 2020
  • The Li-ion battery is considered to be one of the potential power sources for electric vehicles. In fact, the efficiency, reliability, and cycle life of Li-ion batteries are highly influenced by their thermal conditions. Therefore, a novel thermal management system is highly required to simultaneously achieve high performance and long life of the battery pack. Basically, thermal modeling is a key issue for the novel thermal management of Li-ion battery systems. In this paper, as a basic study for battery thermal modeling, temperature distributions inside the simple Li-ion battery pack (comprises of nine 18650 Li-ion batteries) under a 1C discharging condition were investigated using measurement and computational fluid dynamics (CFD) simulation approaches. The heat flux boundary conditions of battery cells for the CFD thermal analysis of battery pack were provided by the measurement of single battery cell temperature. The temperature distribution inside the battery pack were compared at six monitoring locations. Results show that the accurate estimation of heat flux at the surface of single cylindrical battery is paramount to the prediction of temperature distributions inside the Li-ion battery under various discharging conditions (C-rates). It is considered that the research approach for the estimation of temperature distribution used in this study can be used as a basic tool to understand the thermal behavior of Li-ion battery pack for the construction of effective battery thermal management systems.

Development of Usability Evaluation Criteria for Senior-Friendly Autonomous Transportation Robot

  • Kim, Seon Chil;Kim, Sun Jung;Choi, Kyongon
    • 대한인간공학회지
    • /
    • 제33권5호
    • /
    • pp.407-422
    • /
    • 2014
  • Objective: The purpose of the study is to develop quantitative usability evaluation criteria for senior-friendly autonomous transportation robot. Background: The Republic of Korea has become the most rapidly aging society, and is anticipated to enter the post-aged society in 2026. To raise the quality of life of a senior with limited mobility and to reduce the burden of caregivers, many high-tech assistive products with information technologies are developed nowadays. The senior-friendly autonomous transportation robot is one person robot vehicle to move a senior to the destination for hospitals, nursing homes or silver town complex. With built-in navigation system and environmental monitoring censors, it automatically seeks the path to the destination and avoids collision to obstacles and pedestrians on the way. Due to the early stage of the product, few usability studies in this field have been done, mostly on general service robots to assist seniors, power wheelchairs and delivery robots. ISO and KS standards for the service robots are focused on safety. Method: Based on the reference usability index, the early draft of the usability evaluation questionnaires was developed. After small group tests and interviews, the experts modified the initial draft to the Usability Evaluation Criteria for Senior-Friendly Autonomous Transportation Robot (UEC-SFATR). Result: UEC-SFATR consisted of 4 subscales - Safety, Controllability, Efficiency and Satisfaction. All of the 4 subscales of UEC-SFATR were passed the reliability criteria by 4 groups of seniors, divided by gender and familiarity of smart-devices. Conclusion: UEC-SFATR covers wider area of user experiences of the SFATR and is a good measurement tool to help both the users and developers of the robot. Application: This study provides guide to the future product development and product competitiveness evaluation by quantifying user experiences for the SFATR.

직교 배열표를 이용한 휠 기반 회전형 전자기 유도 방식 에너지 하베스터 개발 (Development of Rotational Type of Wheel-Based Electromagnetic Induction Energy Harvester by Using Orthogonal Array)

  • 박현철;문용준;권세진
    • 대한기계학회논문집B
    • /
    • 제37권2호
    • /
    • pp.125-130
    • /
    • 2013
  • TPMS(Tire pressure monitoring system)의 의무장착에 대한 법률개정에 따른 개발의 활성화를 토대로, WSN(Wireless Sensor Network)의 '설치하고 잊어버린다'는 기본 명제 하에, 차량수명과 동일한 성능의 배터리 대체용 에너지 하베스터에 대한 연구가 활발히 진행되고 있다. 본 논문은 자동차의 메커니즘적인 측면에서 가장 유용한 회전운동 성분을 이용하여 회전하는 휠과 고정된 브레이크 디스크 사이의 상대운동을 통한 전자기 유도방식 발전을 채택하였다. 휠 측에 구성된 코일과 브레이크 디스크에 매립된 자석의 다양한 배열과 코일 권선수 등을 설계변수로 잡고 직교배열표를 이용하여 최적의 조합을 찾아낸 후 실험을 통해 실제 축전되는 전기 에너지의 양을 측정하여 도출된 특성함수를 바탕으로 본 모듈의 타당성을 검증하였다.

해상기상탑 설계에 관한 연구 (A Study on Design of Offshore Meteorological Tower)

  • 문채주;장영학;박태식;정문선;주효준;권오순;곽대진;정권성
    • 한국태양에너지학회 논문집
    • /
    • 제34권2호
    • /
    • pp.60-65
    • /
    • 2014
  • A meteorological(met) tower is the first structure installed during the planning stages of offshore wind farm. The purpose of this paper is to design the met tower with tripod bucket type support structure and to install the sensors. The support structure consist of a central steel shaft connected to three cylindrical steel suction buckets which is more cheaper than monopile or jacket type. And the remote wind condition sensors and marine monitoring equipment, including adcp, pressure type tide gauge, wave height sensors, and scour sensors, remote power supply are installed. The manufactured met tower constructed on sea area which is in front of Gasa island. All of functions of met tower showed normal operation conditions and the wind data got by remote data collection system successfully.

원전 운전 유연성 향상을 위한 운전 조정기 개념의 개발 (Conceptual Development of the Plant Operations Regulator for Nuclear Power Plant Operating Flexibility)

  • Park, Jung-In;Lee, Myeong-Hoon;Song, In-Ho;Oh, Soo-Youl;Hah, Yung-Joon
    • Nuclear Engineering and Technology
    • /
    • 제24권3호
    • /
    • pp.285-296
    • /
    • 1992
  • 가압경수로형 원전을 위한 운전조정기의 개념 설계를 수행하였다. 운전조정기는 디지탈 감시 제한 계통으로서, 원전의 주요 운전 인자들을 감지하여 운전 제한치를 벗어나지 않도록 조정한다. 이는 운전 유연성을 향상시켜서 원전이 전력망 요구에 효과적으로 대처할 수 있도록 한다. 운전 허용 범위를 넘어서는 전력망 요구에 대해서 이를 제한하거나 제어 체계를 변경함으로써 이용률에 영향을 주지 않으며 운전을 수행할 수 있도록 한다. 이 개념은 1000 MWe급 가압경수로인 영광 3,4호기의 거동 모의를 통하여 평가되었다. 그 모의 계산 결과 운전 조정기가 원전의 운전 유연성 향상을 위하여 유용하게 사용될 수 있음을 보여 주었다.

  • PDF

Effect of Work Stress and Supplementary Feeding on Body Conformation, Ovarian Activity and Blood Parameters in Mashona Cows in a Smallholder Farming System

  • Chimonyo, M.;Kusina, N.T.;Hamudikuwauda, H.;Nyoni, O.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제13권8호
    • /
    • pp.1054-1058
    • /
    • 2000
  • The objective of this study was to determine the effect of draught stress on certain haemograms and ovarian activity and the influence of dietary supplementation on the negative effects of draught in cows. Blood parameters and ovarian activity were assessed in supplemented non-working (SNW), supplemented working (SW) and non-supplemented non-working (NSNW) cows. Body weights and body condition scores were recorded fortnightly. Blood samples were collected through jugular venipuncture in December, February and April to determine the contents of haematocrit, erythrocyte, haemoglobin and white blood cells. Ovarian palpations were carried out in October, January and April. The SW cows maintained body weights (p>0.05) during the monitoring period whereas both SNW and NSNW cows gained (p<0.05) body weights. Body condition scores were similar between SW and NSNW cows. Cows in the NSNW group had lower (p<0.05) haematocrit concentrations in April than both supplemented groups. In December, erythrocyte concentrations were similar (p>0.05) among all treatment groups. Haemoglobin concentrations were higher (p<0.05) in SW and SNW cows in February and April than in December. The SW cows had higher leucocyte contents (p<0.05) in February than the other groups of cows. All treatment groups showed similar (p>0.05) ovarian activity in January. However, the NSNW group showed a lower proportion (p<0.05) of cows that exhibited normal ovarian activity in April. The results suggest that dietary supplementation of cows increases haematocrit and haemoglobin contents. In addition, supplementary feeding during the period of draught power provision maintains ovarian activity in cows.

On Orbit Data Analysis About the Passive Cooling of MIRIS, a Compact Space Infrared Telescope

  • Lee, Duk-Hang;Moon, Bongkon;Jeong, Woong-Seob;Pyo, Jeonghyun;Lee, Chol;Kim, Son-Goo;Park, Youngsik;Lee, Dae-Hee;Park, Sung-Joon;Kim, Il-Joong;Park, Won-Kee;Seon, Kwang-Il;Nam, Uk-Won;Cha, Sang-Mok;Park, Kwijong;Park, Jang-Hyun;Yuk, In-Soo;Ree, Chang Hee;Jin, Ho;Yang, Sun Choel;Park, Hong-Young;Shin, Ku-Whan;Suh, Jeong-Ki;Rhee, Seung-Wu;Park, Jong-Oh;Lee, Hyung Mok;Matsumoto, Toshio;Han, Wonyong
    • 천문학회보
    • /
    • 제39권1호
    • /
    • pp.50.1-50.1
    • /
    • 2014
  • The Multi-purpose InfraRed Imaging System (MIRIS) is the main payload of Science and Technology Satellite 3 (STSAT-3), which was launched onboard Dnepr rocket from Russian Yasny Launch Base in November 2013. The MIRIS is an infrared (IR) camera, and the telescope has to be cooled down to below 200K in order to reduce thermal background noise. For the effective cooling and low-power consumption, we applied passive cooling method to the thermal design of the MIRIS. We also conducted thermal analysis and tested for the passive cooling before the launch of STSAT-3. After the launch, we have received State-of-Health (SOH) data from the satellite on orbit, including temperature monitoring results. It is important that the temperature of the telescope was shown to be cooled down to below 200K. In this paper, we present both the temperature data of the MIRIS on orbit and the thermal analysis results in the laboratory. We also compare these results and discuss the verification of the passive cooling.

  • PDF