• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.4
• /
• pp.283-296
• /
• 2008

The numerical simulations for groundwater flow were carried out to support the input parameters for safety assessment in LILW repository site. As the input parameters for safety assessment, the groundwater flux into the underground facilities during construction, flow rate through the disposal silo after closure of disposal silo and flow pathway from the disposal silo to discharge area were analyzed using the 10 cases groundwater flow simulations. From the total 10 numerical simulation results, the statistics of estimated output were similar to among 10 cases. In some cases, the analyzed input parameters were strongly governed by locally existed high permeable fracture zone at radioactive waste disposed depth. Indeed, numerical simulation for well scenario as a human intrusion scenario was carried out using the hydraulically severe case model. Using the results of well scenario, the input parameters for safety assessment were also obtained through the numerical simulation.

• Journal of Korea Port Economic Association
• /
• v.32 no.4
• /
• pp.165-182
• /
• 2016

This study examines the competitiveness and cooperativeness among the container ports in East Asia by analyzing their monthly dynamics in eight years (2008-2015). Time series data on container throughput divided into origin and destination (O/D), such as the top six Chinese ports and the transshipment (T/S) ports such as Hong Kong, Busan, and Singapore, are computed with two methods based on the Vector Error Correction Model (VECM). The first Granger causality test results show that Busan T/S has significant bilateral relations with three Chinese O/D ports; and significant unidirectional relations with three other O/D ports. Shenzhen port has significant bilateral relations with Singapore, and has a significant unidirectional relation with Hong Kong port. Co-integrating test results showed that Busan holds negative co-integration with all Chinese O/D ports. Impulse response function (IRF) results show an opposite direction between paired ports. The ratios of the impulse from T/S ports are significantly high to one another in the short-run, but its power declines as time passes. The ratio of the impulse from the Chinese ports to T/S ports is less significant in the short-run period, however, it becomes more significant as time passes. The significance of most shocks was high in the second period, but was diluted after the sixth period.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.267-274
• /
• 2018

A variety of appendages are attached to coastal and offshore fishing boats to improve stability during navigation or fishing operations (stability performance and roll reduction). These appendages are generally classified into three types, which are shown in Fig. 1. The numerical calculations were conducted for the following eight cases: one case of a bare hull, three cases where a single appendage attached, three cases of a pair of appendages attached, and one case where all three appendages were attached. Table 1 presents the main dimensions of the bare hull and Table 2 describes the main dimensions of the three appendages. The fluid dynamic performance with regard to the three hull appendages was evaluated via CFD for the following cases: each of the appendages attached independently, a pair of appendages attached, and all three appendages attached simultaneously. The No. 1 appendage showed that pressure resistance was proportionally greater than friction resistances. Both Nos. 2 and 3 appendages showed comparable levels of pressure and friction resistances. The correlation between appendages was minimal in the case of pairs and Comparing the cases of the No. 2 appendage attached and all appendages attached, at 11 kn, the EHP showed an difference of 9 %.

• The KIPS Transactions:PartD
• /
• v.8D no.1
• /
• pp.32-43
• /
• 2001

Due to the limitation of data modeling power and the view update ambiguity, relational view is limitedly used for engineering applications. On the contrary, object-oriented database view would playa vital role in defining custom interface for engineering applications because the above two limitations of the relational view are overcome by the object-oriented view. Above all, engineering application data interface should fully support updates. More specifically, updates against the data interface needs to be unambiguously defined and its semantic behavior should be equal to base schema updates'. For this purpose, we define the notion of update semantic preserving which means that view updates displays the same semantics as base schema. Besides, in order to show the feasibility of this characteristics, specific and concrete algorithms for update preserving updates are presented for a CAD specialized object-oriented database view - MultiView. This paper finds that in order that virtual classes coudld form a schema with 'isa' relationships rather than just a group of classes, the update semantics on the virtual classes should be defined such that the implied meaning of 'isa' relationships between classes are not to be violated. Besides, as its sufficiency conditions, we derived the update semantics and schema constituable conditions of the virtual classes that make view schemas look like base schemas. To my best knowledge, this is the first research that presents the sufficiency conditions by which we could defined object-oriented views as integrated schemas rather than as separate classes.

• Journal of the Korean Geographical Society
• /
• v.48 no.2
• /
• pp.272-287
• /
• 2013

This paper describes the importance of selecting explanatory variables(e.g. land price determinants) in hedonic pricing models employed in predicting real estate price, and explores dynamics of the land price determinants over time. The City of Junju was chosen as the study area, and repeated measured price data of standard lots over 17 years were analyzed. We applied a three-level modeling approach to this data in consideration of its nested data structure and longitudinal characteristics. Main land price determinants we focused on are primarily based on items included in the standard comparison table of land price, which is an official hedonic pricing model used by Government to estimate land price for tax levy. Our result shows that the land price fluctuation over 17 years was not uniform over the whole study area with each neighborhood revealing different price trend, and as such warrants longitudinal model components. In addition, some of determinants previously recognized as important were proved insignificant. It was also found that significant determinants at a particular time point lost its power gradually over time and vice versa. It is expected that more accurate prediction of price would be possible when taken account for this dynamics of price determinants over time in applying hedonic pricing model method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.6
• /
• pp.48-54
• /
• 2007

This paper describes the analysis of transient phenomena on the point that a human body suffers an electrical shock. A couple of case studies were discussed by using an ATPDraw simulation tool. Two models for the case studies were constructed on the assumption that the electrical shock event takes place under water to simulate the severest condition ; the first model that the human body contacts with an energized part exposed to water ; the second model that both hands and feet simultaneously contact with the ground under water. After modeling, the transient phenomena for the models were analyzed by comparing the voltages and currents calculated at each part of the human body. As a result steep front kicks in voltage and current were observed as transient phenomena on the point that the human body contacts with the energized part exposed to water in the first model and the magnitudes of the kicks considerably increased. It was considered however, the effect of the kicks due to the commercial power source on the human body could be neglected because the product of the current through the body and the short duration is less than the safety limit. When both hands and feet simultaneously contact with the ground in the second model, the voltage generally decreased all over the body parts, while the current flowing through the chest abruptly increased. The duration of this current was very shot, as well, thus its effect on the electrical shock is considered insignificant. After all, it was confirmed through the simulation results that the electrical shock depends on the magnitude in voltage and the body impedance.

• Korean Chemical Engineering Research
• /
• v.43 no.2
• /
• pp.286-293
• /
• 2005

An interpretation on the solid circulation characteristics in a fluidized-bed process has been carried out as a first step to simulate the dry entrained-bed absorption and bubbling-bed regeneration system for $CO_2$ removal from flue gas. A particle population balance has been developed to determine the solid flow rates and particle size distributions in the process. Effects of principal process parameters have been discussed in a laboratory scale process (absorption column: 25 mm i.d., 6 m in height; regeneration column: 0.1 m i.d., 1.2 m in height). The particle size distributions in absorption and regeneration columns were nearly the same. As gas velocity or static bed height in the absorption column increased, soild circulation rate and feed rate of fresh sorbent increased, however, mean particle diameter decreased in the absorption column. As cut diameter of the cyclone of the absorption column increased, solid circulation rate decreased, whereas feed rate of fresh sorbent and mean particle diameter in the absorption column increased. As attrition coefficient of sorbent particle increased, solid circulation rate and feed rate of fresh sorbent increased but mean particle diameter in the absorption column decreased.

• Wind and Structures
• /
• v.30 no.4
• /
• pp.433-450
• /
• 2020

The strong turbulence characteristic of typhoon not only will significantly change flow field characteristics surrounding the large-scale wind turbine and aerodynamic force distribution on surface, but also may cause morphological evolution of coast dune and thereby form sand storms. A 5MW horizontal-axis wind turbine in a wind power plant of southeastern coastal areas in China was chosen to investigate the distribution law of additional loads caused by wind-sand coupling movement of coast dune at landing of strong typhoons. Firstly, a mesoscale Weather Research and Forecasting (WRF) mode was introduced in for high spatial resolution simulation of typhoon "Megi". Wind speed profile on the boundary layer of typhoon was gained through fitting based on nonlinear least squares and then it was integrated into the user-defined function (UDF) as an entry condition of small-scaled CFD numerical simulation. On this basis, a synchronous iterative modeling of wind field and sand particle combination was carried out by using a continuous phase and discrete phase. Influencing laws of typhoon and normal wind on moving characteristics of sand particles, equivalent pressure distribution mode of structural surface and characteristics of lift resistance coefficient were compared. Results demonstrated that: Compared with normal wind, mesoscale typhoon intensifies the 3D aerodynamic distribution mode on structural surface of wind turbine significantly. Different from wind loads, sand loads mainly impact on 30° ranges at two sides of the lower windward region on the tower. The ratio between sand loads and wind load reaches 3.937% and the maximum sand pressure coefficient is 0.09. The coupling impact effect of strong typhoon and large sand particles is more significant, in which the resistance coefficient of tower is increased by 9.80% to the maximum extent. The maximum resistance coefficient in typhoon field is 13.79% higher than that in the normal wind field.

• International Commerce and Information Review
• /
• v.14 no.2
• /
• pp.249-269
• /
• 2012

The focus of our work is to identify and understand the drivers of alliance performance so that businesses can maximize their chances of a successful alliance-an area that has received little attention in empirical modeling. Although both conceptual and applied research on alliances has increased, an empirically tested comprehensive theoretical model that explains alliance performance has yet to be developed. Using five salient perspective, namely market power theory, transaction cost theory, the resource-based view, institutional theory, real option theory, this paper attempts to provide a theoretical rationale linking motives of global alliance networks on firm's capabilities, partner's capabilities, operating structures, and performances of Korean companies. The key contribution of this study is that it paints a picture of what matters in driving alliance performance. Our work shows the complex nature of driving performance and the interplay of firm's capabilities, partner's capabilities, and operating structures for understanding alliance performances. This study has given us a small but significant step forward towards understanding the intricacies of alliance performance. We are now better able to understand the respective roles played by various alliance factors and derive insights that lead to improved alliance performance.

• Journal of Digital Convergence
• /
• v.15 no.4
• /
• pp.365-375
• /
• 2017

This study is executed to investigate convergent factors to Job Satisfaction(JS) among Hospital Administrative Staff(HAS). The survey was administered to 221 staff from 11 general hospitals located in Jeonbuk area from Nov. 1st, 2016 to Jan. 31st, 2017. The structured self-administered questionaries were used. The hierarchical multiple regression analysis shows the following results. The JS of respondents turned out to be significantly higher in following groups: a group without work shift, a group with more employees, a group in which self efficacy is higher, a group in which skill variety in job characteristics is higher, a group in which interpersonal conflict and lack of reward in occupational stress are lower. The results show explanatory power of 61.0%. The results of the study indicate that the efforts, to increase self efficacy, and to manage job characteristics and occupational stress, are required to improve the JS among HAS. The results are expected to be useful for the program and human resource management to related to the JS among HAS. In the following study, the analysis of structural equation modeling about additional factors of the JS among HAS will be needed.