• 한국음향학회지
• /
• 제29권6호
• /
• pp.355-364
• /
• 2010

초음파 진단장치의 음향출력 특성은 전기음향 변환 장치인 배열 탐침자의 성능에 크게 영향을 받으며, 생물학적안전 측면에서 매우 중요하다. 본 논문에서는 초음파 진단장치용 배열 탐침자로부터 방사되는 음향파워를 소자별로 측정할 수 있는 자동화 시스템을 구성하였으며, 곡선형 탐침자의 경우 각 소자의 지향성이 측정에 미치는 영향을 확인하고 이를 보정하는 기법을 개발하였다. 선형, 위상형, 곡선형 배열 탐침자를 대상으로 음향파워 측정결과, 본 논문에서 제시하는 측정기법은 배열 탐침자의 음향파워 특성을 평가하는데 적합함을 확인하였다.

• 한국전자통신학회논문지
• /
• 제15권5호
• /
• pp.835-840
• /
• 2020

본 논문은 수십시간이 소요되는 총복사전력(TRP) 측정 시간을 단축하는 방안을 컴퓨터 모의실험과 실제 실험을 통하여 검증한 결과를 제시하고 있다. 5G의 고주파수 대역에서는 무선통신기기의 정확한 성능평가를 위하여 TRP 측정이 기본적으로 수행되지만 촘촘한 샘플링 간격 때문으로 인하여, 긴 측정 시간이 소요되는 문제점을 가지고 있다. 더구나 다양한 빔 형성 시나리오를 갖는 경우 전체 측정 시간은 기하급수적으로 증가한다. 따라서, TRP 측정 시간 단축 방안이 필요하며, 그 일환으로 본 논문에서는 유효등방복사전력(EIRP)과 TRP 관계식을 이용하여 측정시간을 단축하는 방법을 다루었다. 먼저 TRP와 EIRP의 관계식을 관찰하고, 피시험용 안테나의 설계 및 제작하였으며 모의실험 결과와 측정결과를 통한 오차를 분석하였다. 그 결과 EIRP를 통하여 TRP를 산출한 결과는 매우 작은 오차를 가짐을 확인하였다. 본 방법은 향후 5G 무선통신기기의 TRP 도출에 적용할 수 있을 것으로 예상한다.

• 한국통신학회논문지
• /
• 제39C권6호
• /
• pp.482-489
• /
• 2014

본 논문은 IEEE 802.11 환경에서 새로운 AP를 탐색하기 위한 네트워크 스캐닝의 기존 방식을 802.11k의 Measurement Pilot을 활용하여 개선하는 새로운 알고리즘을 제안한다. 그리고 제안한 알고리즘과 종래의 알고리즘을 시뮬레이션 환경에서 비교하여 분석한다. 일반적인 IEEE 802.11을 사용하는 기기들은 탐색 시간이 짧다는 장점을 갖는 능동 탐색(Active Scan)방식을 활용한다. 하지만 이 방식은 수동 탐색(Passive Scan) 방식에 비해 많은 전력사용을 필요로 한다. 본 논문에서 제안하는 탐색 알고리즘은 IEEE 802.11k에서 활용되는 비컨(Beacon)보다 짧은 주기를 갖는 Measurement Pilot을 활용하여 수동 탐색과 능동 탐색의 장점을 취합하여 전력사용을 줄인다.

• Structural Engineering and Mechanics
• /
• 제12권4호
• /
• pp.449-457
• /
• 2001

In the design of industrial chimneys and towers, structural engineers must assume a level of the inherent damping in the structures. In order to better estimate the dynamic response of those structures, actual damping was measured from wind-induced vibration signals of chimneys and towers and its characteristics with respect to the response levels, the structural systems, and the wind direction were discussed. Damping ratio and natural frequency for three chimneys and two towers were calculated using random decrement technique.

• 조명전기설비학회논문지
• /
• 제26권5호
• /
• pp.48-57
• /
• 2012

This paper analyzes the characteristic of gird connected photovoltaic power generation system which is available to connect the utility. Renewable energy photovoltaic power system has been linked to the system to analyze the impact of photovoltaic system. It is measured that power data for the Grid connected photovoltaic power plant with instantaneous measuring and 3-sec measuring for 7 days. Harmonic field measurements have shown that the harmonic contents of a waveform varies with time. A cumulative probability approach is the most commonly used method to solve time varying harmonics. So, it is used 50[%] cumulative probability approach. This paper provides an in depth analysis on power quality field measurement of the Grid connected photovoltaic power plant.

• Journal of electromagnetic engineering and science
• /
• 제16권4호
• /
• pp.225-228
• /
• 2016

KRISS-V, a V-band millimeter-wave source module for a primary RF power standard and calibration system developed by the Korea Research Institute of Standards and Science is here presented. The output power of KRISS-V is several times higher than that of commercial amplifier/multiplier chains and is highly stable (the standard deviations of output power are less than 0.01% in the worst case). The spectral purity of KRISS-V is high enough to consider it a single-tone signal generator. We also added programmable attenuation capability to KRISS-V for remote power control. Moreover, the in-house source module is cost-effective and adaptable to various measurement schemes. The structure of the model as well as detailed component information are introduced so that it can be reproduced.

• 한국정보전자통신기술학회논문지
• /
• 제6권3호
• /
• pp.174-182
• /
• 2013

The power wheelchair is an important and convenient mobility device. The demand of power wheelchair is increasing for assistance in mobility. In this paper we proposed a robotic wheelchair for mobility aid to reduce the burden from the disabled. The main issue in an autonomous wheelchair is the automatic detection and avoidance of obstacles and going to the pre-designated place. The proposed algorithm detects the obstacles and avoids them to drive the wheelchair to the desired place safely with panning scan from sensors of distance measurement and fuzzy control. By this way, the disabled will not always have to worry about paying deep attention to the surroundings and his path.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.298-306
• /
• 1993

A portable torque and power measurement system for small farm equipment based on instrumented pulley was developed. The prototype pulley was machined from mild steel, with spokes serving as strain beams. Strain gages mounted to the spokes sense the bending strain due to the torque and convert this into millivolt output. Calibration results showed the torque-millivolt relationship was linear, while hysterisis and error were less than 1% fs. For power measurements, an additional tachmeter with dcvoltage output is necessary. With the tachometer , error in power measurement was +-1.03W or 0.2% fs. Field tests showed that for ease of installation, no machine alteration needed and safety, this system had advantage over other methods for small farm equipment.

• 전기학회논문지
• /
• 제66권11호
• /
• pp.1547-1553
• /
• 2017

Due to the high penetration ratio of dispersed generations, overvoltage problem of the feeder has become more an important issue in distribution system operation. This paper proposes a new method for the smart inverter to control reactive power to mitigate voltage rise by the reverse power flow from the DGs. The proposed method controls reactive power based on current measurement while conventional methods use voltage measurement which include unacceptably large errors. Various case studies using MATLAB simulation have been performed to verify effectiveness of proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.193-195
• /
• 2003

This paper presents an approach to estimate the power transmission line parameter by phasor measurement units(PMUs), which are synchronized to 1 pps signal of GPS. Existing approaches to estimate power transmission line parameter, are mainly off-line ones, based on faults or switching events on other neighboring lines. In this paper, to obtain static and dynamic properties of power transmission line parameter in service, the prototype of pmu-based Transmission Line Parameter Monitoring System (TLPMS) is proposed. Also, an technique to estimate parameters of transmission line described as 2-port network model and the soundness of estimated parameters are addressed.