• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1373-1375
• /
• 1999

High impedance fault (HIF) is defined as fault the general overcurrent relay can not detect or interrupt. Especially when HIF occur in residential areas, energized high voltage conductor results in fire hazard, equiment damage or personal threat. This paper proposes the model of HIF in transmission line using the ZnO arrester and resistance to be implemented within EMTP. Wavelet transform is efficient and useful for the detection of HIF in power system, because it uses variable windows according to frequency. HIF detection method using wavelet transform can distinguish HIF from similar phenomena like arcfurance load, capacitor bank switching and line switching.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.245-247
• /
• 1998

Compacting of Overhead power transmission lines can be helpful in solving many problems, such as reduction of land and forest losses. decrease of the line's environmental impact zones, improvement of its electrical performance. And in overhead transmission lines, regular polygon configuration of bundled conductors are considered and adopted. This papers are compared to subconductor surface charges and electric field gradients, line parameters, natural capacities for regular polygon and modified configurations in 345kV 4 bundle 2 circuits horizontal type transmission lines.

• ETRI Journal
• /
• 제45권2호
• /
• pp.338-345
• /
• 2023

A filtering power divider based on air-filled substrate-integrated waveguide (AFSIW) technology is proposed in this study. The AFSIW structure is used in the proposed filtering power divider for substantially reducing the transmission losses. This structure occupies a large area because of the use of air as a dielectric instead of typical dielectric materials. A filtering power divider provides power division and frequency selectivity simultaneously in a single device. The proposed filtering power divider comprises three AFSIW cavities. The filtering function is achieved using symmetrical inductive posts. The input and output ports of the proposed circuit are realized by directly connecting coaxial lines to the AFSIW cavities. This transition from the coaxial line to the AFSIW cavity eliminates the additional transitions, such as AFSIW-SIW and SIW-conductor-backed coplanar waveguide, applied in existing AFSIW circuits. The proposed power divider with a second-order bandpass filtering response is fabricated and measured at 5.5 GHz. The measurement results show that this circuit has a minimum insertion loss of 1 dB, 3-dB fractional bandwidth of 11.2%, and return loss exceeding 11 dB.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.327_328
• /
• 2009

The insulator being used for transmission line is to mount the charged conductor on the tower or other supports. The insulators are classified according to its material: porcelain, glass and polymer. Polymer insulators are also called as composite insulator or non ceramic insulator (NCI). Insulators are a major element of a power transmission system. Since a faulty insulator can lead to a wide spreading blackout, it must have sufficient mechanical and electrical strength. It must be durable, have high electrical insulation and be able to withstand a leakage current. It must also be able to withstand the toughest weather conditions. In Korea, porcelain insulators have been used widely. However, to make compact equipment and keep up with global trends, we have enhanced domestic production of polymer insulator and are encouraging its applications. Accordingly, this thesis will look at types of insulators, use and trends, and prospects of insulators application in the field.

• 조명전기설비학회논문지
• /
• 제17권3호
• /
• pp.95-102
• /
• 2003

전선착설로 인한 전력설비에의 피해를 방지하기 위하여, 전선착설을 예측하고 적절한 전선착설 방지대책을 제시하는 것은, 전선착설로 인한 피해 발생의 가능성과 전력계통의 안정적 운영의 양 측면을 동시에 고려하여야 하기 때문에 고도한 판단과 결단이 필요한 문제로써, 지식공학적 수법을 적용하는 것이 매우 효과적인 분야이다. 이에 따라, 전선착설의 예측과 방지대책 수립에 관련된 경험적 지식을 지식베이스화하여 전문가 시스템을 구축하고, 사례 데이터를 이용한 시뮬레이션을 통하여 제안 기법의 유효성을 확인하였다.

• 정보보호학회논문지
• /
• 제21권1호
• /
• pp.65-75
• /
• 2011

전력선통신(Power Line Communication: PLC)은 기존의 전력선에 고주파 신호를 중첩하는 방법으로 데이터를 전송하는 통신기술이다. 전력선통신은 연결의 편리성과 확장성 때문에 통신선로 보급이 낮은 지역의 대체 통신수단 뿐 아니라 옥내 가전기기(Home appliances)간의 통신 등으로도 주목받고 있으며, 최근 한국 전력에서도 전력선 통신 기술을 이용하여 검침값을 전송하는 원격검침시스템을 구축하고 있다. 대부분의 전력선 통신 기술은 하위 계층의 보안 프로토콜을 이용하여 안전성을 확보하고 있는데, 이는 전력선 통신의 물리적인 특성과 여러 가지 난수요소로 인해 실질적인 검침값 획득 및 변조 등의 공격이 어려울 것이라는 예측에 기반을 두고 있다. 이 논문에서는 전력선 통신의 정확한 보안성을 평가하기 위해, 먼저 하위 계층 보안 프로토콜을 포함한 전력선 통신의 동작 방식을 분석한다. 이를 통하여 검침값 데이터가 현재 상태로 전송될 경우 전력선 통신의 여려 가지 임의성에도 불구하고 검침값 변조와 같은 실질적인 공격이 가능함을 보인다. 또한 이를 보완하기 위해 다른 통신 프로토콜과 마찬가지로 상위 계층에서 보안 프로토콜이 필요함을 지적한다. 이 논문에서 제시한 전력선 통신의 동작방식 분석은 본 논문의 결론과 더불어 향후 스마트 그리드 등 대규모 사업에 사용될 전력선 통신의 표준 보안 기술 설계에 유용하게 활용될 수 있을 것으로 기대된다.

• 전기학회논문지
• /
• 제62권10호
• /
• pp.1383-1389
• /
• 2013

There were telecommunication noise and malfunctions of the electronic devices occurred over a wide area due to the high harmonic voltage and/or current levels of the Back-to-back converter in the DFIG wind power system even though the magnitude of all harmonics is within the international standards. The triangular carrier signals of the PWM used in the power converter system is related to the telecommunication noise because they are in the range of audible frequencies and amplified by a variety of the standing waves that were excited by harmonic voltage sources in the weak grid system such as a long distance distribution transmission lines. This paper describes the characteristics of the harmonics in the wind turbine-generator, numerical analysis and simulation of the harmonics resonance phenomena in the distribution lines as well as measuring induced voltage of the telecommunication lines in parallel with power lines in order to verify the root cause of the telecommunication noise. These noise problems can occur in a wind turbine power system with a non-linear converter at any time, as well as photovoltaic power system. So, the preliminary review of suitable filter devices and switching frequencies of the PWM have to be required by considering the stability of the controller at the design stage but as part of the measures the effect of the telecommunication cable shields was analyzed by comparing the measured data between multi-conductor with/without shields so as to attenuate the sources of the harmonics voltage induced into the telecommunication lines and to apply the most cost-effective measures in the field.

• 한국산학기술학회논문지
• /
• 제12권1호
• /
• pp.384-389
• /
• 2011

본 논문은 스마트 그리드에 사용할 수 있는 저항성 전력 분배기에 관한 연구이다. 미래 스마트 그리드에서는 고속 전력선 통신이 실용화 단계에 이를 것으로 예상되므로, 전력 분배기의 초고주파수 응답 또한 그 중요성을 가지고 있다. 본 논문에서는 thin-film 기술을 사용한 저항성 전력 분배기를 설계, 측정 및 분석을 하였다. 고주파 전송 신호선 제작을 위해 코플라나 전송 선로를 제작, 측정하였다. 3 dB 차단 주파수는 72 GHz로 측정되었으며, S11의 크기는 70 GHz까지 <-20 dB 특성을 보였다. 저항성 전력 분배기 제작을 위해 델타형 구성으로된 회로를 thin-film 기술을 이용하여 제작하였다. 3 dB 차단 주파수는 50 GHz를 보였다. 저항성 전력 분배기의 고속 입력 신호 (40 Gb/s)가 이론에서 예상한 대로 6 dB의 삽입 손실을 가지며 전송되는 것을 실험적으로 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.578-579
• /
• 2011

This paper describes the analysis of induced lightning surge phenomena at underground power cables under construction when the lightning surge strikes at phase conductor of grounding wire of overhead line in service. Therefore, This paper proposes the optimal protection methods establishment against lightning surge induced from operating transmission.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2175-2178
• /
• 2005

During normal machine operation, partial discharge(PD) measurements were performed with turbine generator analyzer(TGA) in five high voltage motors(rated 6.6kV). These high voltage motors were installed with 80pF capacitive couplers at the terminal box. The PD patterns were displayed two dimensional and three dimensional. TGA summarizes each plot with two quantities such as the normalized quantity number(NQN) and the peak PD magnitude(Qm). Off-line PD measurements were conducted on five motors. These motors were energized to 3.81kV. The PD levels in pC were measured with a conventional digital PD detector. The comparison of positive to negative PD indicates whether the defect elements of PD are within the insulation or on the insulation surface. Internal discharges were generated in phase A, B and C of COP-B and pulv.-B, in phase B of Pulv. C and in phase C of Pulv.-D motor. Discharge at conductor surface was discovered in phase A of Pulv. D motor. Slot discharges occurred in three phases of Pulv. E motor.