• 전자공학회논문지 IE
• /
• 제44권4호
• /
• pp.30-34
• /
• 2007

전력선 통신에서는 전력을 공급하기 위해 설치된 전력선을 통신 매체로 사용하기 때문에 채널 환경이 열악하다고 할 수 있다. 본 논문에서는 원활한 통신을 위해 신호 감쇠를 저감하는 결합기를 적용한 gate 구동회로를 설계하였다. 결합기의 수신 동작과 송신 동작을 등가회로 해석하여 구동회로에 적합한 임피던스를 갖도록 설계하였다. 그 결과 전력선에 연결된 수 많은 전자 제품들의 상호 작용으로 인한 임피던스 변화에 대한 환경을 개선하여 전력선 통신에서의 BER(Bit Error Rate)을 45% 향상하여 더 원활한 통신을 할 수 있도록 하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권6호
• /
• pp.678-684
• /
• 2005

In this Paper telemetering system for home automation is Proposed and implemented. Proposed and developed systems are composed with a home server and a few clients which send metering data of gas electric power water and home security to home server using power line communication. Management computer located in office of apartment complex collects all kinds of measured home data from each home server with multi drop communication by UDP Protocol A simple ASK method is used for power line communication Collected data from each home can be used for issuing the bill of each house and web service. The experiments were carried out under laboratory environment using various kinds of electric home appliances to ascertain the performance.

• 조명전기설비학회논문지
• /
• 제18권3호
• /
• pp.128-134
• /
• 2004

본 연구에서는 전력선통신 기술을 이용하여 전송주파수에 음성신호를 변조한 후 전력선으로 전송하고 전력선으로부터 수신 및 복조하여 변조된 음성신호를 검출하는 음향전달 시스템을 제작하였다. 제작된 시스템으로부터 변복조 및 주파수 특성을 분석하여, 어학실습 교육을 위한 용도로서의 활용 가능성을 평가하였다. 그 결과 전달된 음향 신호가 최적상태는 아니지만 어학실습 교육용으로 청취하기에 충분한 수준으로 판단되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1137-1142
• /
• 2008

In this paper, an effect on power conversion unit in high-speed railway vehicle by loss of contact between a catenary system and pantograph suppling electrical power to high-speed railway vehicle are investigated. One of the most important needs accompanied by increasing the speed of high-speed railway vehicle is reduced that arc phenomenon by loss of contact brings out EMI. in case of high-speed railway vehicle using electrical power, as comparison with diesel rolling stock, PLD(Power Line Disturbance) such as harmonic, transient voltage and current, EMI, dummy signal injection etc usually occur. To analysis the effect on loss of contact, it is necessary electrical modeling system between the contact line and the pantograph according to the loss of contact. Therefore analytical model of a contact line and a pantograph is constructed to simulate the behaviour of loss of contact. The reliability of the modeling system is verified by simulation implementation on kinds of loss of contact.

• 한국전자통신학회논문지
• /
• 제5권3호
• /
• pp.245-250
• /
• 2010

본 논문에서는 열영상 기반의 전력선 검출기법이 제안되었다. 전력선 검출 기법은 무인 항공기의 자율 운행을 위해 필요한 기술이다. 하프변환된 데이터를 바탕으로 각도별 분할 기법을 개발하였으며, 이를 바탕으로 그룹핑을 행하고, 마지막으로 전력선을 검출하는 기법을 개발하였다. 제시된 알고리듬에 대한 실험결과에서 다양한 직선성분이 존재하는 영상에서 전력선을 효과적으로 검출할 수 있음을 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1921_1922
• /
• 2009

According to recent researches, apparent power in non-sinusoidal single phase system can be represented with geometric algebra. In this paper, the geometric algebra is applied to apparent power defined in a multi-line system having transmission lines with frequency-dependent resistances under non-sinusoidal conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.432-436
• /
• 1991

This paper presents a new algorithm for the countermeasure to alleviate without shedding system loads the line overloads due to contingency in power system. This method for relieving by line switching is based on obtaining the line outage distribution factors - the linear sensitivity factors, which give the amount of change in the power flow of each line due to the removal of same other line in the power system. These factors are made up of the elements of Bus Reactance Matrix and branch reactances. In this paper a fast algorithm and program is presented for obtaining only the required Bus Reactance elements which corresponds to a non - zero elements of Bus Admittance Matrix and elements of columns which correspond to two terminal Buses of the overloaded(monitored) line. The proposed algorithm has been validated in tests on the 6 busbar test system

• 전기학회논문지
• /
• 제59권5호
• /
• pp.847-853
• /
• 2010

This paper describes switching surge analysis for reclosing decision in 345kV combined transmission line with XLPE power cable. Reclosing operation should be decided based on the detailed technical analysis in combined transmission line because this line includes power cable section which is week on insulation. Insulation of power cable can be breakdown at the week point in case of reclosing moment. Therefore the detailed analysis has to be carried out by considering several conditions such as length ratio of power cable section, arrestor, inserting resistance, charging rate, grounding resistance, etc.. On the other hand sheath voltage on IJ(Insulated Joint) is analyzed to check dangerous condition on cable cover. Analysis is performed by EMTP/ATP. Analysis results show that reclosing can be operated as the single line-to-ground fault occurs on overhead line in 345kV combined transmission line, if the inserting resistance is considered before the operation of main circuit breaker.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.865-870
• /
• 1998

We propose a multifunctional power line compensator (PLC) which can individually compensate multiple impediments at the same time. The PLC has the flexibility to share power to each compensation according to commands, this improving the working rate. We constructed a 100kVA PLC model including a controller with digital signal processor (DSP) to realize a multifunctional compensation were obtained.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.77-81
• /
• 2004

In this paper a novel line interactive UPS (Uninterruptible Power Supply) using the two 4-leg VSCs and AC line reactor is proposed. The 4-leg Voltage Source Converter(VSC) can use the DC link voltage effectively by the 3-D SVPWM method. Hence the DC battery voltage can be reduced by $15\%$ in comparison to that of the conventional line-interactive UPS system. One VSC is in parallel with the AC line reactor of the power source side, and the other is in series with the load. The parallel 4-leg voltage source inverter controls three-phase line voltage independently in order to control the line reactor current indirectly. It eliminates the neutral line current and the active ripple power of the source side using the pqr theory so that unity power factor and the sinusoidal source current can be achieved even though both the source and the load voltages have zero sequence components. The series 4-leg voltage source inverter compensates the line voltage and allows the load voltage to be balanced and harmonic-free. Both of parallel and series 4-leg voltage source inverters always act as independently controllable voltage sources, so that three-phase output voltage shows a seamless transition to the backup mode. The feasibility of the proposed UPS system has been investigated and verified through computer simulation results.