국내에서 발생하는 토양침식(soil erosion)은 주로 강우에 의해 발생하며, 이로 인해 농경지 유실, 탁수 발생, 하천 통수능 저하 등 여러 수문학적·환경적 문제가 발생한다. 따라서 유역 내 토양침식 위험지역을 선별하고, 해당 지역의 토양유실 및 유사의 발생량을 산정하는 것은 토양보전 대책 수립 시에 중요한 지표로 활용된다. 침식-유사유출의 물리적 과정은 크게 '강우에 의한 토양 분리(detachment by raindrop)'와 '지표류에 의한 토양 분리(detachment by overlandflow)'로 나눌 수 있으며, 그중 강우에 의한 토양 분리는 수침식(water erosion)의 첫 번째 과정 중 하나로 강우 시 낙하하는 강우 입자들이 갖는 운동에너지가 지표면을 타격할 때 토양체로부터 토양입자가 분리되는 과정이다. 따라서 강우에 의한 토양분리량 산정을 위해서는 강우 운동에너지(rainfall kinetic energy, KE)의 정확한 계산이 요구된다. 그러나 기후 및 지리적 특성 등 여러 조건에 따라 강우 운동에너지는 지역마다 다르게 나타나며, 이로 인해 강우 운동에너지 추정이 매우 어려운 실정이다. 따라서 강우 운동에너지 추정은 주로 강우강도(rainfall intensity, I)와의 관계를 이용한 함수식을 활용한다. 본 연구에서는 대상 지역인 상주지역에 광학우적계(disdrometer)를 설치하여 2020년 6월부터 2021년 12월까지 관측된 37개의 강우 사상에 대하여 KE-I의 관계를 분석하고, 이를 통해 강우 운동에너지식을 도출하였다. 또한, 기존에 국외 및 국내에서 제시된 선형(linear), 멱함수(power-law function), 지수함수(exponential function) 형태의 강우 운동에너지 공식과 본 연구에서 산정된 KE를 비교하였다. 그 결과 비체적 강우 운동에너지에서 Sanchez-Moreno et al. (2012)가 제안한 멱함수 형태의 공식이, 비시간 강우 운동에너지에서 Kinnel (1981)이 제안한 지수함수 형태의 공식이 각각 강우 운동에너지 추정에 통계적으로 유의한 것으로 나타났다.
본 연구는 고해상도 디지털 X선 영상 검출기 적용을 위해 미세 $Gd_2O_2S$:Tb 형광체 분말을 저온 액상법을 이용하여 합성하였다. 제조된 형광체 분말을 이용하여 입자침전법을 이용하여 형광체 필름을 제작하여 발광특성을 조사하였다. 측정결과, Tb 첨가농도에 따른 상대적인 발광량 측정결과 5 wt%의 첨가농도에서 가장 높은 발광효율을 보였으며, 첨가농도가 증가할수록 소광현상에 의한 발광강도가 급격히 감소하는 경향을 보였다. 또한 270 ${\mu}m$ 두께의 $Gd_2O_2S$:Tb에서 2945 pC/$cm^2$/mR의 발광 강도를 가졌으며, 발광 강도가 거의 포화되는 것을 관찰할 수 있었다. 끝으로 제조된 형광체의 영상획득 성능을 평가하기 위해 상용화된 CMOS 센서를 이용하여 X선 영상을 획득하여 MTF, NPS를 측정하여 DQE 평가를 수행하였다. 측정결과, DQE(0)의 값은 37%로 다소 낮은 값을 보였다. 향후 필름 제조 공정상의 문제점을 해결한다면, DQE를 개선할 수 있을 것으며, 고해상도 의료 방사선 영상 시스템 적용에 유용하게 적용 가능할 것으로 판단된다.
본 연구에서는 충진층 플라즈마 반응기의 특성 및 에틸렌을 분해하는데 있어서 플라즈마 반응기의 직렬 및 병렬 배열에 따른 영향에 대해 조사하였다. 플라즈마 방전 개시 전의 반응기 유효 커패시턴스는 ${\gamma}$-알루미나 펠릿이 충진된 경우가 충진되지 않은 경우보다 컸으나, 일단 플라즈마 방전이 개시되고 나면 ${\gamma}$-알루미나 충진 여부와 관계없이 유효 커패시턴스가 유사하였다. 플라즈마 상태에서 생성되는 전자의 에너지는 전기장세기에 크게 의존하며, 0~20%(v/v) 범위의 산소농도(질소 : 80~100% (v/v))에서는 기체조성에 크게 영향을 받지 않는 것으로 나타났다. 플라즈마 상태에서 생성되는 여러 활성 성분들 중 바닥상태의 산소원자 및 오존이 산화 반응에 주로 관여하며, 전기장세기가 높아질수록 산소원자가 상대적으로 감소하는 대신 질소원자의 분율이 급격히 증가한다. 플라즈마 공정에서 전압, 방전 전력, 기체 유량, 체류시간 등 반응기의 성능에 영향을 주는 여러 가지 파라미터들이 있지만, 모든 파라미터들이 비에너지밀도 하나로 통합될 수 있음을 확인하였으며, 직렬 및 병렬로 연결된 반응기의 성능도 비에너지밀도만의 함수로 간주할 수 있으므로 반응기 설계 과정이 크게 단순화될 수 있다. 비에너지밀도의 함수로 나타낸 반응속도상수를 이용하여 계산한 결과도 실험데이터를 잘 예측할 수 있었다.
As an advance study for the development of a heat sink for special purpose high power illumination, an investigation was made to find feasibility for the application of copper plated EP to a heat sink of small LED light of less than 10W installed in commercial product. In this study, the plated heat sink with EP copper was fabricated for the conventional LED light. It was used actually for finding heat radiation property and effectiveness of the heat sink accompanied with measurement of luminous intensity. The heat is radiated by transfer and dissipation only through the copper plated surface due to extremely low heat conductivity of EP in case of EP heat sink; however the total area of the plate plays the function of heat transfer as well as heat radiation in case of the aluminum heat sink. It seems that the volume difference of heat radiating material is so big that the temperature $P_1$ is 9.0~12.3% higher in 3W and 42.7~54.0% higher in case of 6W volume difference of heat radiating material is so big that the temperature $P_1$ is 9.0~12.3% higher in 3W and 42.7~54.0% higher in case of 6W even though heat transfer rate of copper is approximately 1.9 times higher than that of aluminum. It was thought that this is useful to utilize for heat sink for low power LED light with the low heating rate. Also, the illumination could be greatly influenced by the surrounding temperature of the place where it is installed. Therefore, it seems that the illumination installation environment must be taken into consideration when selecting illumination. Further study was expected on order to aims at development of an exterior surface itself made into heat radiation plate by application of this technology in future.
Laser acupuncture is defined as the stimulation of traditional acupuncture points with low-intensity, nonthermal laser irradiation. Possible advantages in using laser acupuncture are the noninvasive, painless and low risks of infection treatment. The purpose of this study is to assess the effect of laser acupuncture on the quality and waveform of arterial pulses. Ten acupuncture points were stimulated repeatedly three times in 30 individuals by laser with emission in the near infrared spectral region (808 nm) using an out power and power density of 45 mW and $143W/cm^2$. The analysis of pulse quality and waveform was performed based on the measurement of arterial pressure of the left and right wrist, using a 3-dimensional blood pressure pulse analyzer. Excess-like pulse quality of subjects before laser acupuncture changed significantly to balanced pulse quality after 10, 20, and 30 minutes of laser acupuncture; coefficient of deficient or excess, $C_{DE}$, decreased significantly from 0.68 before acupuncture to 0.61, 0.55, and 0.55 after 10, 20, 30 minutes of laser acupuncture ($$p{\leq_-}0.006$$), respectively. Other pulse qualities, floating or sinking, slow or rapid, choppy or slippery did not change significantly by laser acupuncture (p > 0.05). Pulse waveform analysis showed that amplitude of main peak (systolic function or aortic compliance, $h_1$) of left and right artery pulse waves decreased significantly after 10, 20, and 30 minutes of laser acupuncture (p < 0.05). Other parameters, duration of one cardiac cycle (T), duration of rapid systolic ejection ($T_1$), duration of the systolic phase ($T_4$), and duration of the diastolic phase ($T_5$) of left and right artery pulses did not change significantly after laser acupuncture (p > 0.05).
1차원적 x-선 회절도형의 계산방법을 이용하여 Biedellite-nontronite 와 saponite-iron sponite의 X-선 회절현상을 조사하였다. 에틸렌 글리콜 처리된 스멕타이트는 수화된 스멕타이트보다 강한 002와 003 회절선을 나타내는데, 002와 003회절선은 Fe 성분의 함량에 따라서 그 강도가 점진적으로 변화한다. 에틸렌 글리콜처리된 dioctahedral 스멕타이트와 trioctahedral 스멕타이트에서 002/003 회절선 강도비율은 스멕타이트내에 Fe성분이 많아짐에 따라 높아진다. 이러한 비율의 변화는 Al이나 Mg보다 훨씬높은 Fe성분이 많아짐에 따라 높아진다. 이러한 비율의 변화는 Al이나 Mg보다 훨씬높은 Fe의 scattering factor에 기인한 것이며, octahedral 양이온들의 scatterinf factor들을 계산함으로써 여러 스멕타이트들의 X-선 회절선들을 정량적으로 비교할 수 있다. Interlayer 양이온들은 Fe등의 octahedral양이온들에 비해서 X-선 회절선들에 경미한 영향을 미친다. 00l회절선들이 octahedral sheet의 전반적인 회절선강도에 관한 자료를 제공하지만, Fe 성분이 많은 일부 dioctahedral 스멕타이트들은 1차원적 X-선 회절도형만으로는 trioctahedral 스멕타이트로부터 명확하게 구분될 수 없다. 1차원적 X-선 회절도형의 계산에 의하면 복합체로 이루어진 이질의 스멕타이트의 00l회절선 분포양상은 이 이질의 스멕타이트 화학성분이 평균 성분에 해당하는 균질 스멕타이트와 거의 같다. 회절선이 넓어지는 현상에 관련된 여러 요소들이 잘 파악되지 않으면, 00l회절선들이 넓어지는 정도르 스멕타이트의 이질도를 판단하기 위해 응용하는 데는 문제점이 있는 것으로 사료된다.
국내 중고교 엘리트 사이클 선수를 대상으로 점진부하 운동 시 유산소반응과 폐환기 반응을 분석하는데 목적을 두었다. 남자 사이클 선수($17{\pm}1$ 세, $175{\pm}5\;Cm$, $70{\pm}9\;kg$) 12명이 신체계측, 점진부하 운동 검사, 폐기능 검사에 참여하였다. 사이클 에르고미터를 이용한 점진부하 운동 중 이들의 최대산소섭취량($VO_2max$)과 최대파워 (Wmax), 환기량, 산소 및 이산화탄소호흡당량($V_E/VO_2$, $V_E/VCO_2$), 호흡율, 일회호흡량 등이 측정되었다. 호흡반응의 시간변인으로 흡기시간(Ti), 호기시간(Te), 일회호흡시간(Tb), 흡기의무사이클(Ti/Tb), 흡기율($V_T$/Ti)이 분석되었다. 폐기능으로는 폐활량, 일초호기량, 일초율, 최대호기량 등이 측정되었다. 선수들은 최대운동시 $57.5{\pm}3.9\;ml{\cdot}kg^{-1}{\cdot}min^{-1}$의 $VO_2max$, $194.1{\pm}8.6\;beat{\cdot}min^{-1}$의 최대심박수를 보였으며, Wmax 는 평균 452 W에 도달하였다. $VO_2max$은 신체계측 변인들과 상관관계를 보이지 않았다. 대부분의 환기반응은 운동강도가 점차적으로 증가하면서 동반 증가하였다. 운동강도의 증가와 함께 Ti, Te, Tb는 감소하였으며, Ti/Tb는 대략적으로 일정하게 유지되었다. 250 W 이하에서 신장, 체중, 신체질량지수, 체표면적은 $V_T$/Ti 그리고 Ti/Tb 와 높은 상관관계를 나타냈다(p<0.05). 결과적으로, 엘리트 사이클 선수들의 최대유산소능력은 성인에 비해 낮은 것으로 보이며, 이는 성인과 호흡조절 양상이 다른 것으로 추정된다. 신체계측 변인은 $VO_2max$와 상관성이 존재하지 않았다. 호흡반응의 시간 변인은 운동강도 250 W 이하에서만 체격과 연관성을 가지는 것으로 보인다. 흡기율은 어린 선수들의 운동지속시간과 연관 있어 보이지만, 흡기의무사이클은 성인과 유사한 것으로 보인다.
단일 레이저의 출력 한계를 뛰어넘기 위한 빔결합 방법으로서, 보강간섭 원리를 이용한 타일형 결맞음 빔결합 시스템에 대해 연구하였다. 와트급 출력의 3 채널 결맞음 광섬유 레이저 및 삼각형 배치의 팁-틸트(tip-tilt) 기능을 갖춘 3 채널 출력단을 자체제작 하였다. 모니터링 시스템, 위상제어기, 3 채널 위상변조기 간의 궤환 제어 시스템(closed-loop system)을 구성하고 SPGD 알고리즘을 적용하여, 위상잠금 속도 5~67 kHz, 이상적인 계산값 대비 중심부 광세기 효율 53.3%의 성공적인 3 채널 위상잠금을 구현하였다. 빔결합 소자가 필요 없고, 가장 고출력 가능성을 가진 타일형 결맞음 빔결합을 위한 요소기술 개발이 완료되어, 향후 다채널, 고출력, 고속 제어 연구로 이어질 수 있을 것으로 기대된다.
The accurate evaluation of wind characteristics and wind-induced structural responses during a typhoon is of significant importance for bridge design and safety assessment. This paper presents an expectation maximization (EM) algorithm-based angular-linear approach for probabilistic modeling of field-measured wind characteristics. The proposed method has been applied to model the wind speed and direction data during typhoons recorded by the structural health monitoring (SHM) system instrumented on the arch Jiubao Bridge located in Hangzhou, China. In the summer of 2015, three typhoons, i.e., Typhoon Chan-hom, Typhoon Soudelor and Typhoon Goni, made landfall in the east of China and then struck the Jiubao Bridge. By analyzing the wind monitoring data such as the wind speed and direction measured by three anemometers during typhoons, the wind characteristics during typhoons are derived, including the average wind speed and direction, turbulence intensity, gust factor, turbulence integral scale, and power spectral density (PSD). An EM algorithm-based angular-linear modeling approach is proposed for modeling the joint distribution of the wind speed and direction. For the marginal distribution of the wind speed, the finite mixture of two-parameter Weibull distribution is employed, and the finite mixture of von Mises distribution is used to represent the wind direction. The parameters of each distribution model are estimated by use of the EM algorithm, and the optimal model is determined by the values of $R^2$ statistic and the Akaike's information criterion (AIC). The results indicate that the stochastic properties of the wind field around the bridge site during typhoons are effectively characterized by the proposed EM algorithm-based angular-linear modeling approach. The formulated joint distribution of the wind speed and direction can serve as a solid foundation for the purpose of accurately evaluating the typhoon-induced fatigue damage of long-span bridges.
본 논문에서는 4분할 광 검출기 상에 입사된 광점의 크기에 따른 optical beam deflection방식에서의 변위 측정감도의 변화에 대해 살펴보았다. 3mW의 헬륨-네온 레이저를 사용하여 optical beam deflection방식의 광학적 변위 측정 장치를 제작하였으며 광 검출기에 도달하는 광점의 크기를 변화시켜가며 제작된 변위 측정 장비가 나타내는 변위 측정감도를 관찰하였다. 또한 광 검출기에 도달하는 optical beam power를 원형의 균일한 분포를 지닌 광점으로 설정하여 광점 크기의 변화에 따른 변위 측정감도를 계산하였다. 측정된 결과와 계산을 통하여 검출기 상에 입사하는 광점의 크기가 작을수록 변위 측정감도가 증가함을 알 수 있었으며 이는 나노미터 급의 변위측정 장비 개발에 있어 광 검출기에 도달하는 광점의 크기를 최소화함으로써 변위 측정감도를 최적화 할 수 있음을 나타낸다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.