• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.4
• /
• pp.51-59
• /
• 2008

Incontinence is the urination disorder as the leakage of urine without her own volition and the woman's representative disease which reduce the life quality. The electromagnetic therapy has high possibility of development cause it has no needs of operant exercise, no arousing of shame and impossibility of infection. But, it has improvement points such as uniformity of the treatment protocol, patient dependance and absent of patient monitoring system. With these demands, the system which stimulate the pelvic flaw muscle with electromagnetic and monitoring the patient status during the therapy is proposed, in this study. And individually adapted electromagnetic therapy system for incontinence patient is also suggested. The proposed system consisted of electromagnetic generation device, cooling device, treating chair, patient monitoring device with pulsation and control software. The simulation for high power system and evaluation confirm was performed. With the development of control software, the convenience of using and maintenance are ensured and the patient adapted therapy protocol is applied. The developed patient adapted electromagnetic therapy system with monitoring device is regarded as the patient affinitive treating method by reducing the riskiness, improving the efficiency with patterned protocol and pre/post therapy. These results, in this study, can bring the safe and organized treatment method to incontinence patients and can lead the variable study for electromagnetic therapy in incontinence.

• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.506-512
• /
• 2013

Biomass and low-grade coals are known to be better potential sources of energy compared to crude oil and natural gas since these materials are readily available and found to have large reserves, respectively. Gasification of these carbonaceous materials produced syngas for chemical synthesis and power generation. Woodchip, sawdust and lignite were gasified with steam in a thermobalance reactor under atmospheric pressure in order to evaluate their kinetic rate information. The effects of gasification temperature ($600{\sim}900^{\circ}C$) and partial pressure of steam (20~90 kPa) on the gasification rate were investigated. The three different types of gas-solid reaction models were applied to the experimental data to predict the behavior of the gasification reactions. The modified volumetric model predicted the conversion data well, thus the model was used to evaluate kinetic parameters in this study. The observed activation energy of biomass, sawdust and lignite gasification reactions were found to be in reasonable range and their rank was found to be sawdust > woodchip > lignite. The expression of apparent reaction rates for steam gasification of the three solids was proposed to provide basic information on the design of coal gasification processes.

• The KIPS Transactions:PartD
• /
• v.15D no.6
• /
• pp.755-766
• /
• 2008

Recently, NAND flash memory is becoming into the spotlight as a next-generation storage device because of its small size, fast speed, low power consumption, and etc. compared to the hard disk. However, due to the distinct characteristics such as erase-before-write architecture, asymmetric operation speed and unit, disk-based systems and applications may result in severe performance degradation when directly implementing them on NAND flash memory. Especially when a B-tree is implemented on NAND flash memory, intensive overwrite operations may be caused by record inserting, deleting, and reorganizing. These may result in severe performance degradation. Although ${\mu}$-tree has been proposed in order to overcome this problem, it suffers from frequent node split and rapid increment of its height. In this paper, we propose Log-Structured B-Tree(LSB-Tree) where the corresponding log node to a leaf node is allocated for update operation and then the modified data in the log node is stored at only one write operation. LSB-tree reduces additional write operations by deferring the change of parent nodes. Also, it reduces the write operation by switching a log node to a new leaf node when inserting the data sequentially by the key order. Finally, we show that LSB-tree yields a better performance on NAND flash memory by comparing it to ${\mu}$-tree through various experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4A
• /
• pp.336-344
• /
• 2005

Discrete Wavelet Transform(DWT) is the oncoming generation of compression technique that has been selected for MPEG4 and JEPG2000, because it has no blocking effects and efficiently determines frequency property of temporary time. In this paper, we propose an efficient bit-serial architecture for the low-power and low-complexity DWT filter, employing two-channel QMF(Qudracture Mirror Filter) PR(Perfect Reconstruction) lattice filter. The filter consists of four lattices(filter length=8) and we determine the quantization bit for the coefficients by the fixed-length PSNR(peak-signal-to-noise ratio) analysis and propose the architecture of the bit-serial multiplier with the fixed coefficient. The CSD encoding for the coefficients is adopted to minimize the number of non-zero bits, thus reduces the hardware complexity. The proposed folded 1D DWT architecture processes the other resolution levels during idle periods by decimations and its efficient scheduling is proposed. The proposed architecture requires only flip-flops and full-adders. The proposed architecture has been designed and verified by VerilogHDL and synthesized by Synopsys Design Compiler with a Hynix 0.35$\mu$m STD cell library. The maximum operating frequency is 200MHz and the throughput is 175Mbps with 16 clock latencies.

• Composites Research
• /
• v.29 no.1
• /
• pp.40-44
• /
• 2016

Nuclear fuel cladding used in a nuclear power plant must possess superior oxidation resistance in the coolant atmosphere of high temperature/high pressure. However, as was the case for the critical LOCA (loss-of-coolant accident) accident that took place in the Fukushima disaster, there is a risk of hydrogen explosion when the nuclear fuel cladding and steam reacts dramatically to cause a rapid high-temperature oxidation accompanied by generation of a huge amount of hydrogen. Hence, an active search is ongoing for an alternative material to be used for manufacturing of nuclear fuel cladding. Studies are currently aimed at improving the safety of this cladding. In particular, ceramic-based nuclear fuel cladding, such as SiC, is receiving much attention due to the excellent radiation resistance, high strength, chemical durability against oxidation and corrosion, and excellent thermal conduction of ceramics. In the present study, cladding with $SiC_f/SiC$ protective films was fabricated using a process that forms a matrix phase by polymer impregnation of polycarbosilane (PCS) after filament-winding the SiC fiber onto an existing Zry-4 cladding tube. It is analyzed the oxidation and microstructure of the metal cladding with $SiC_f/SiC$ composite protective films using a drop tube furnace for thermal shock test.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.412-417
• /
• 2015

The IMO MEPC has been increasingly strengthening the emission standard for marine environment protection. In particular, nitrogen oxide (NOx) emissions of all ocean-going ships built from 2016 will be required to comply with the Tier-III regulation. In this study, a vanadia based SCR (Selective Catalytic Reduction) system developed for ship application was installed on a diesel engine for power generation of the training ship T/S SAENURI in Mokpo National Maritime University. For the present study, the exhaust pipeline of the generator diesel engine was modified to fit the urea SCR system. This study investigated the NOx reduction performance according to the two kind of injection method of urea solution (40%): Auto mode through the PLC (Programable Logic Control) and Manual mode. We were able to find the ammonia slip conditions when in manual mode method. So, the optimal urea injection quantity can be controlled at each engine load (25, 35, 50%) condition. It was achieved 80% reduction on nitrogen oxide. Furthermore, we found that the NOx reduction performance was better with the load up-down (while down to 25% from 50%) than the load down-up (while up to 50% from 25%) test.

• Journal of National Security and Military Science
• /
• s.4
• /
• pp.83-118
• /
• 2006

This study is to develop digital leadership in a field of national defense. Today, korean society is facing the crisis of national security. But national defense leadership is not show in the circumstance of national security crisis. As you know, national defense leadership is a process that make use of influence. Which means it converges people's interest and demands well and also show people the right vision of national defense and make them to comply the policy about national security. Because of the environmental change, our national defense leadership is having a new turning point. First, international order, which is under post-cold war, raises possibility of guarantee of peace and security in international society but also, cause the increase of multiple uncertainty and small size troubles in security circumstance. In addition, Korean society is rushing into democratization and localization period by success in peaceful change of political power went through about three times. The issue of political neutralization of military is stepping into settlement but still, negative inheritance of old military regime is worrying about it. In this situation, we can't expect rise in estimation about the importance of security and military's reason for being. So, military have to give their concern to not only internal maintenance of order and control and growth of soldiers but also developing external leadership to strength influence to society and military's the reason for being. So for these alternative I'm suggesting a digital leadership of national defense which fits digital era. This digital leadership is the leadership which can accept and understand digital technology and lead the digital organization. To construct digital national defense we need a practical leadership. The leadership has to be digital leadership with digital competence that can direct vision of digital national defense and carry out the policy. A leader who ha s digital leadership can lead the digital society. The ultimate key to construct digital government, digital corporate and digital citizen depends on digital leader with digital mind. To be more specific, digital leadership has network leadership, next generation leadership, knowledge driven management leadership, innovation oriented leadership. A leader with this kind of leadership is the real person with digital leadership. From now on, to rise this, we have to build up human resource development strategy and develop educational training program.

• Membrane Journal
• /
• v.15 no.4
• /
• pp.310-319
• /
• 2005

This paper describes the preliminary study on the development of multi-stage membrane demonstration plant for removal of carbon dioxide from flue gas stream being emitted from LNG boiler in thermal power generation plant. The prerequisite requirement is to design and develop the membrane process producing a $99\%\;CO_2$ with $90\%$ recovery from LNG flue gas of 1,000 $Nm^3$/day. Asymmetric polyethersulfone hollow fiber membranes and membrane modules developed in this laboratory[1] were used in this study. Using the permeation data for the hollow fiber membranes, modelling on the membrane module and multi-stage membrane process was done to meet the requirement condition of the process design. The effects of the operating pressure of feed and permeate side and feed concentration on $CO_2$ purity and recovery were investigated experimentally with the developed hollow fiber modules. These experimental results matched well with theoretical modelling results.

• Journal of Environmental Policy
• /
• v.6 no.2
• /
• pp.47-70
• /
• 2007

In recent days, people's requests about water resources have been developed from managing quality and quantity of water resources to forming a river environment by restoring normal function of river. To meet these requests, it is necessary to establish the concept of environmental flows. In Korea, the environmental flows was introduced as a concept of river maintenance flows in a sense of river management. The function of river maintenance flows has been changed according to what the major issue is in that age such as navigation, water quality, and prevention of saline water intrusion. As the assesment of river maintenance flows in Korea focused mainly on the function of water usage oriented in human, it could not be defined and emphasized in a sense of ecosystem as a pure meaning of environmental flows. And while the existing river maintenance flows are included the assesment of flows, there is not a practical procedure to supply them and the efficient management in a sense of environment is not performed. The environmental flows should be further developed from the river maintenance flows and changed to a new concept focused on maintaining the health of ecosystem. In other words, the environmental flows should be defined as a necessary flows for maintaining the function of river and its original value, and be considered on the same or higher value of flows for maintenance of economic activity, recreation, and power generation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.795-805
• /
• 2011

The research on the immersive media technology is actively being done with the emergence of immersive services using immersive media, especially in the broadcasting industry and with the increased market demand for it. The industry which produces, transmits, processes and services the immersive contents is commonly called Immersive Media Industry. Immersive Media Industry has recently received attention as next-generation strategic industry with its high marketability and its high possibility of market expansion through convergence with other industry such as education, health, advertisement, travel and public service industry. As other advanccd country such as the U.S., Japan and Europe buckle down to take the innitiative in the immersive media industry, Korea government also begins to make plan to promote the immersive media industry. As above, immersive media industry is a cutting-edge convergence industry which embraces broadcasting, telecommunication and contents industry and it is rising as core growth engine industry. This article analyses the economic effects of immersive media industry through quantatitive method and evaluates the relations between the immersive media industry and the other related industries. As a result, the effect on production inducement of immersive media industry is 610.9 billion Korean Won; the effect on value-added inducement is 468.7 billion Korean Won; and it is measured that 3,258 job will be created by the immersive media industry.