• Journal of Navigation and Port Research
• /
• v.41 no.6
• /
• pp.359-364
• /
• 2017

This study examined business acts related to leisure boats, so as to investigate the differences of regulations and things to be supplemented, as well as to suggest improvement measures. In order to achieve this purpose, the authors analyzed the respective legislations. The Acts on businesses using leisure boats(or power-driven water leisure crafts) are the Marine Transportation Act, Excursion Ship and Ferry Business Act, Water-Related Leisure Activities Safety Act, and Act on the Development, Management, etc. of Marinas. These Acts have differences in regulations, in terms of gross tonnage, the age of vessels, crewman, and the liquor traffic. These differences can cause problems such as adjusting the gross tonnage of the vessel by modifying the structures of the facilities, assigning old vessels, sailing without crewmen required for safety, and going against fairness in the liquor traffic in similar businesses. Such differences appeared to be caused by the lack of understanding of leisure boats and the series of new legislation which have been added one by one. It is required to raise the understanding on the characteristics of leisure boats and reflect them in the legislation.

• Journal of Sensor Science and Technology
• /
• v.14 no.2
• /
• pp.69-77
• /
• 2005

The electronic nose (e-nose) has been used in food industry and quality controls in plastic packaging. Recently it finds its applications in medical diagnosis, specifically on detection of diabetes, pulmonary or gastrointestinal problem, or infections by examining odors in the breath or tissues with its odor characterizing ability. Moreover, the use of portable e-nose enables the on-site measurements and analysis of vapors without extra gas-sampling units. This is expected to widen the application of the e-nose in various fields including point-of-care-test or e-health. In this study, a PDA-based portable e-nose was developed using micro-machined gas sensor array and miniaturized electronic interfaces. The rich capacities of the PDA in its computing power and various interfaces are expected to provide the rapid and application specific development of the diagnostic devices, and easy connection to other facilities through information technology (IT) infra. For performance verification of the developed portable e-nose system, Six different vapors were measured using the system. Seven different carbon-black polymer composites were used for the sensor array. The results showed the reproducibility of the measured data and the distinguishable patterns between the vapor species. Additionally, the application of two typical pattern recognition algorithms verified the possibility of the automatic vapor recognition from the portable measurements. These validated the portable e-nose based on PDA developed in this study.

• Journal of the Korean association of regional geographers
• /
• v.17 no.5
• /
• pp.568-581
• /
• 2011

Having gone through the international financial crisis in 1997, the Korean government has sought a new future economic breakthrough. In this line, the government chose the cultural contents business and has supported this area intensively. With the cultural contents promotion policy initiated to foster the world-class culture business based on the traditional Korean culture, Andong, which has diverse cultural traditions, was rediscovered. The Andong local government and the local power elites decided that this promotion policy can not only be an opportunity to invigorate the sluggish local economy, but also help eliminate the old-fashioned image of Andong, and thus actively promoted the cultural contents business. However, there's a conflict among the local elites over which cultural tradition should be chosen as a genuine local cultural tradition. The different views and efforts regarding the cultural identity of the region by each entity not only contributed significantly to the recovery of the local economy by revitalizing tourism, but also helped the region gain an advantageous position in competition with other regions over limited resources. This progress became the groundwork for attracting major institutions and facilities, which are essential for the revitalization of the local economy.

• Journal of the Society of Disaster Information
• /
• v.13 no.3
• /
• pp.305-312
• /
• 2017

In our society, the advanced, advanced, and information industries have continued to grow and now live in the era of the fourth industrial revolution. As the industry develops, the load of the users has also increased so much that it is deepened by the energy shortage phenomenon and the construction of additional energy facilities is required. Therefore, energy plant construction work is being actively carried out in the coastal area. In particular, it is common to build a plant in the ground by filling the coast with soil in other regions, reflecting the fact that Korea is lacking in the country when constructing power plants, gas and petrochemical plants. Current domestic grounding designs are designed or constructed to suit only the use of grounding resistors based on the electrical equipment design technical standards. However, in the case of a plant facility constructed in the untested buried soil, when the lightning current and the abnormal current are inputted, the facility operator or the user due to the elevation of the ground potential is seriously exposed to the risk of electric shock disaster. In this paper, we analyze the ground resistivity of the landfilled soil and use a computer program (CDEGS) based on KS C IEC 61936-1, We analyze the contact voltage and stratification voltage and propose a grounding design optimized for plant installation.

• Korean Security Journal
• /
• no.42
• /
• pp.205-227
• /
• 2015

The Korean Peninsula is put in a position to carry out a highly strategic game vis-a-vis nK, which is asserting itself as a nuclear power amongst Northeast Asia's complex dynamics. While the international community recognizes nK's possession of nuclear weapons as released secret based on nK's three nuclear tests, shrewd strategic thinking is needed by ROK to secure itself as a non-nuclear nation in order to assume a responsible role to the international community, while simultaneously being ready to respond at all times for nK's military provocations. ROK must continue with its twofold strategy, by firm response to military confrontation with nK and maintaining flexible policy of tolerance in the areas of economy and ethnicity. Various strategic options to overcome nK's nuclear threats have been presented to ROK, whose possession of nuclear weapons have been difficult, and nK's nuclear capability is a real threat to ROK's national security. We must be able to respond to nK's nuclear threats strictly from ROK's national security perspective. This thesis aims to propose a response policy for nK's nuclear capability and nK's nuclear attack based on analysis of such nuclear damage, ROK Government's response posture against nK's nuclear threats, centered around ROK Government's non-military response posture.

• Nuclear Engineering and Technology
• /
• v.50 no.2
• /
• pp.268-279
• /
• 2018

The ALCYONE multidimensional fuel performance code codeveloped by the CEA, EDF, and AREVA NP within the PLEIADES software environment models the behavior of fuel rods during irradiation in commercial pressurized water reactors (PWRs), power ramps in experimental reactors, or accidental conditions such as loss of coolant accidents or reactivity-initiated accidents (RIAs). As regards the latter case of transient in particular, ALCYONE is intended to predictively simulate the response of a fuel rod by taking account of mechanisms in a way that models the physics as closely as possible, encompassing all possible stages of the transient as well as various fuel/cladding material types and irradiation conditions of interest. On the way to complying with these objectives, ALCYONE development and validation shall include tests on $PWR-UO_2$ fuel rods with advanced claddings such as M5(R) under "low pressure-low temperature" or "high pressure-high temperature" water coolant conditions. This article first presents ALCYONE V1.4 RIA-related features and modeling. It especially focuses on recent developments dedicated on the one hand to nonsteady water heat and mass transport and on the other hand to the modeling of grain boundary cracking-induced fission gas release and swelling. This article then compares some simulations of RIA transients performed on $UO_2$-M5(R) fuel rods in flowing sodium or stagnant water coolant conditions to the relevant experimental results gained from tests performed in either the French CABRI or the Japanese NSRR nuclear transient reactor facilities. It shows in particular to what extent ALCYONE-starting from base irradiation conditions it itself computes-is currently able to handle both the first stage of the transient, namely the pellet-cladding mechanical interaction phase, and the second stage of the transient, should a boiling crisis occur. Areas of improvement are finally discussed with a view to simulating and analyzing further tests to be performed under prototypical PWR conditions within the CABRI International Program. M5(R) is a trademark or a registered trademark of AREVA NP in the USA or other countries.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.19 no.3
• /
• pp.44-53
• /
• 2011

Siloxane, organo-silicon compound, is used in the various forms of products such as cosmetics and detergents due to its quality physical chemistry attributes. Siloxane included in landfill gas which is caused in the process of decomposing of such products after landfill has imposed negative impacts on the operation of landfill gas utility facilities. The objective of this study was to investigate the siloxane production characteristics depending on the features of various landfill site in Korea so that the analysis was made on the landfilling age and landfill waste by in terms of its concentration, structure and composition. As for the concentration of siloxane depending on time passage, 12 landfill sites were reviewed by landfilling age. As for production attributes change of siloxane by landfill wastes, the source of wastes, physical production ration and siloxane concentration were compared in 6 landfills. The average concentration of total-siloxane within LFG is $6.75mg/m^3$ and cyclic-siloxane out of it occupies over 93%. By element, D4 and D5 in order take the highest proportion regardless of total-siloxane concentration and landfilling age. Even though this study is not able to verify the different impact of each kind of wastes on the generation of siloxane, it is confirmed that total-siloxane and cyclic-siloxane decrease in line with the increase of landfilling age as it does in the first order decay model for landfill gas.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.2
• /
• pp.113-127
• /
• 2021

Although planning techniques linking parks, green areas, and waterways have become common, there are frequent disruptions in the operation and management of landscape-use artificial channels (LuAC). Therefore, this study examined a design to promote the sustainable management and operation of a LuAC using rainwater for the streamlets of the Jeonju-Wanju Innovative City. In order to accomplish the purpose of this study, scenarios were set up by dividing the design into waterhead and waterway portions. First, the scenario regarding the waterhead was analyzed to calculate the water supply and storage required for the waterway and waterhead. The analysis showed that the waterway requires a water supply of 676.8 tons/months, 3,018 tons to 5,512 tons of storage space, and a water depth of 0.75 m to 1.37 m considering the ecological and landscape aspects. The second scenario is to select an effective system of facilities for the operation and management of the LuAC. To accomplish this, a single-circulation system (SCS), which transports water to a highland location was compared to a multi-circulation system (MCS), which supplied water separately to each water space and operated independently. The results showed that the MCS, which was operated independently by small power units, was more effective owing to the vast difference in water supply operation times.

• Land and Housing Review
• /
• v.12 no.2
• /
• pp.13-32
• /
• 2021

Rapid urbanization has resulted in the unprecedented growth of population in Metro Manila, the Philippines and has led to a 'dual' housing crisis - vacant/unoccupied socialized housing and a chronic housing shortage or delayed housing supply. By developing two GIS-based statistical models, this study is to examine socialized housing in comparison with private housing with respect to location patterns, integration, accessibility, social and economic aspects, and vulnerability to environmental hazards. Multiple regression analysis was integrated with the GIS to identify significant variables that influence the spatial distribution of socialized housing. The comparison between the two regression models has shown that socialized housing is located in areas with inappropriate land use and poor accessibility to transportation facilities and built urban resources. Moreover, both regression models have proven the statistical significance of the vulnerability of socialized housing to environmental hazards. The finding explains how the current housing policies do not address the country's housing crisis, especially for the marginalized and low-income households. Thus, the findings provide implications for urban planners and local decision-makers in reforming the current policy interventions.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.1073-1090
• /
• 2018

Since the domestic utility tunnels were built mainly in the development project of the new city, they are all in the form of cut-and-cover box tunnel. But, in the case of overseas construction of utility tunnels for existing urban areas, the bored tunnel types are mainly adopted. It is reasonable to install bored tunnels in a downtown area because it is difficult to block the roads or install bypass roads due to heavy traffic and civil complaints. In order to activate the utility tunnels in bored type, it is necessary to secure optimized cross-sectional design technology considering the optimal supplying capacity and mutual influencing factors (Thermal Interference, electrolytic corrosion, efficiency of the maintenance, etc.) of utilities (power cables, telecommunication cables, water pipes, etc.). The optimal cross-section design method for bored utility tunnels is ultimately to derive the optimal arrangement technique for the utilities. In order to develop the design methods, firstly, the cases of tunnel cross-section (Shield TBM, Conventional Tunneling) in overseas shall be investigated to analyze the characteristics of the installation of utilities in the section and installation of auxiliary facilities, It is necessary to sort out and analyze the criteria related to the inner cross-section design (arrangement) presented in the standards and guidelines.