• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.11 no.17
• /
• pp.67-80
• /
• 1988

This study is concerned with the comparison of two time homogeneous Poisson processes. Traditionally, the methods of testing equality of Poisson processes were based on the binomial distribution or its normal approximations. The sampling plans used in these methods are to observe the processes concurrently over a predetermined time interval, possibly different for each process. However, when the values of the intensities of the processes are small, inverse type sampling plans are more appropriate since there may be cases where only a few or even no events are observed in the predetermined time interval. This study considers 9 inverse type sampling plans for the comparison of two Poisson processes. For each sampling plans considered, critical regions and the design parameters of the sampling plan are determined to guarantee the significance level and the power at some values of the alternative hypothesis. The Problem of comparing of two Weibull processes are also considered.

• ETRI Journal
• /
• v.36 no.4
• /
• pp.635-642
• /
• 2014

Three-dimensional integrated circuits (3D ICs) implement heterogeneous systems in the same platform by stacking several planar chips vertically with through-silicon via (TSV) technology. 3D ICs have some advantages, including shorter interconnect lengths, higher integration density, and improved performance. Thermal-aware design would enhance the reliability and performance of the interconnects and devices. In this paper, we propose thermal-aware floorplanning with min-cut die partitioning for 3D ICs. The proposed min-cut die partition methodology minimizes the number of connections between partitions based on the min-cut theorem and minimizes the number of TSVs by considering a complementary set from the set of connections between two partitions when assigning the partitions to dies. Also, thermal-aware floorplanning methodology ensures a more even power distribution in the dies and reduces the peak temperature of the chip. The simulation results show that the proposed methodologies reduced the number of TSVs and the peak temperature effectively while also reducing the run-time.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.1
• /
• pp.27-34
• /
• 2017

The signal transmitted from radar is not reflected from a single point when the signal reflected by complex target. Resultantly, the amplitude and phase of the received signal can be changed because the target has lots of scatterers. The changes of the amplitude and the phase mean Glint and RCS, respectively. Although the Glint and RCS that caused by the same scatters are uncorrelated, however, they are not independent completely. Therefore, this paper proposes a method for generating the Glint and RCS by using same random number generator. And the time correlations of the Glint and RCS are respectively implemented in frequency domain by using each power spectral density of them.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.1
• /
• pp.10-15
• /
• 1990

This paper presents an algorithm that can compute equivalent impedance effctively in computing 3-phase short circuit current which would be generated in power systems. Also this paper proposes a method that can decide the capacity of circuit breaker by analysing the fault current distribution probabilistically when the fault point of specificed line varies. The efficiency of the algorithm was verified by applying the proposed method to IEEE-6bus system and IEEE-30bus system, and probabilistic fault analysing method is verified economic in facility investment by deciding the proper capacity of circuit breaker.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.3
• /
• pp.336-341
• /
• 1999

Up today, nationally published research results on the methods used in HA modems have studied and shown the major methods; the ASK method and the DS/SS method. In this paper, we applied the DPSK reception method on the PSK method so that solved the acquisition and tracking problem of the signal synchronization which is the defect of PSK. Also, it has been designed to fit in the CISRP and CENELEC specification so that make sure of no effects on other part of the system.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1309-1314
• /
• 2014

The measurement of stator core loss for an induction motor at each manufacturing process is carried out in this paper. Iron loss in the stator core of induction motor changes after each manufacturing process due to the mechanical stress, which can cause the deterioration of the magnetic performances. This paper proposes a new iron loss measuring system of the stator core in an induction motor, which can be applied to the case when the distribution of magnetic flux density is not uniform along the magnetic flux path. In the system, the iron loss is calculated based on the induced voltage of the B-search coil and exciting current.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.361-365
• /
• 2004

This paper describes the various characteristics of voltage sags which can affect the functions of three-phase induction motors that are mostly used in the power distribution systems. These assorted characteristics include motor speed losses, voltage recovery, motor reacceleration, and transient characteristics. An experimental study on the induction motor behaviors was also carried out to confirm these impacts. In addition sequential voltage sags with short durations were considered and investigated. The results show that the occurrence of the second voltage sag after the first one may affects the induction motor adversely.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.811-813
• /
• 1996

High impedance fault can not be easily detected by conventional method. But if it would not be detected and cleared quickly, it can result in fires, and electric shock. In this paper, neural network, which has learning capability, is used for high impedance fault detector. The potential of the neural network approach is demonstrated by simulation using KEPCO's measured data. The instantaneous values and frequency spectrum of current are respectively used as the inputs of neural networks. Also, the methods using combined data to exploit the advantage of each data are proposed. In this paper, back-propagation network(BPN) is used for high impedance fault detector and can use for high speed relay because it detects faults within 1 cycle.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.26-28
• /
• 2004

The primary role of ZnO arresters is to protect transmission and distribution equipments against lightning surges. The extremely nonlinear V-I characteristics of the ZnO arrester obviates the need for isolation gaps and consequently it is continuously connected to line voltage. For this reason, ZnO arresters are degraded with time in actual power systems. In this work, the characteristics of the luminous events caused between the ZnO block and electrodes according to the electrode area were investigated. As a result, the luminous events were effected by electrode area and the longer electrode areas were increased, the more luminous events were decreased. Also the reduction of luminous events was fumed up to the degraded ZnO arrester block.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.103-105
• /
• 2003

본 논문에서는 분산전원을 포함하는 배전계통을 위한 3상 조류계산 프로그램에 대하여 소개한다. 이 프로그램은 배전계통의 방사상 구조를 가정하여 개발된 것이 아니므로 어떠한 구조로 구성된 배전계통이라도 모두 사용이 가능하며, 불평형 부하 및 불평형 선로를 포함하는 계통에 대해서도 해를 구할 수 있도록 고안되었다. Voltage regulator는 각 상별로 tap을 조정할 수 있는 3상 변압기로 모델링하였으며, 분산전원은 계통 내 다양한 위치에 배치하여 수렴특성을 확인하였다. 3상 불평형 부하와 단상 및 2상 선로를 포함하는 20모선 시험 계통을 구성하여 수행한 사례연구에서 조류계산 프로그램은 가혹한 중부하 환경에서도 훌륭한 수렴특성을 보여 주었다.