• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.972-982
• /
• 2017

The Park's vector of stator current is a popular technique for the detection of induction motor faults. While the detection of the faulty condition using the Park's vector technique is easy, the classification of different types of faults is intricate. This problem is overcome by the Multiple Park's Vector (MPV) approach proposed in this paper. In this technique, the characteristic fault frequency component (CFFC) of stator winding faults, rotor winding faults, unbalanced voltage and bearing faults are extracted from three phase stator currents. Due to constructional asymmetry, under the healthy condition these characteristic fault frequency components are unbalanced. In order to balanced them, a correction factor is added to the characteristic fault frequency components of three phase stator currents. Therefore, the Park's vector pattern under the healthy condition is circular in shape. This pattern is considered as a reference pattern under the healthy condition. According to the fault condition, the amplitude and phase of characteristic faults frequency components changes. Thus, the pattern of the Park's vector changes. By monitoring the variation in multiple Park's vector patterns, the type of fault and its severity level is identified. In the proposed technique, the diagnosis of faults is immune to the effects of unbalanced voltage and multiple faults. This technique is verified on a 7.5 hp three phase wound rotor induction motor (WRIM). The experimental analysis is verified by simulation results.

• 전력전자학회논문지
• /
• 제24권1호
• /
• pp.1-8
• /
• 2019

In this study, a maximum power point tracking (MPPT) algorithm based on the perturb and observe (P&O) method with variable step size is proposed to improve the dynamic response characteristic of MPPT, using the existing P&O method. The proposed algorithm, which we verified by simulation and experiment, can track the maximum power point (MPP) through duty control and consisted of three operation modes, namely, constant voltage mode, fast mode, and variable step mode. When the insolation is constant, the voltage variation of the operating point at the MPP is reduced through the step size reduction of the duty in the variable step mode. Consequently, the vibration of the operating point is reduced, and the power generation efficiency is increased. When the insolation changes, the duty and the photovoltaic (PV) voltage are kept constant through the constant voltage mode. The operating point then rapidly tracks the new MPP through the fast-mode operation at the end of the insolation change. When the MPP is reached, the operation is changed to the variable step mode to reduce the duty step size and track the MPP. The validity of the proposed algorithm is verified by simulation and experiment of a PV system composed of a PV panel and a boost converter.

• 한국태양에너지학회 논문집
• /
• 제36권5호
• /
• pp.63-71
• /
• 2016

Installed PV module in field is affected by shading caused by various field environmental factors. Bypass diodes are installed in PV module for preventing a power loss and degradation of PV module by shading. But, Bypass diode is easily damaged by surge voltage and has often initial a defect. This paper propose the electric characteristic variation and the power prediction of PV module with damaged bypass diode. Firstly, the resistance for normal bypass diode and damaged bypass diode of resistance was measured by changing the current. When the current increases, the resistance of normal bypass diode is almost constant but the resistance of damaged bypass diode increases. Next, To estimate power of PV module by damaged bypass diode, the equation for the current is derived using solar cell equivalent circuit. Finally, the derived equation was simulated by using MatLab tools, was verified by comparing experimental data.

• 한국전자통신학회논문지
• /
• 제15권2호
• /
• pp.211-218
• /
• 2020

실내 환경에서 송수신기의 위치 변화에 따른 전파 전달 특성을 시뮬레이션을 통하여 예측하고, 경로손실 측정을 통하여 얻어진 결과를 예측결과와 비교하고 분석하였다. 경로손실 측정 환경으로는 대회의실을 선택하였으며, 또한 실내 장식물 및 비품이 없는 전시실을 선택하여 두 환경의 전파 전달 특성을 비교하였다. 각 실내 환경에서 송신기의 위치는 전방 벽면 중앙과 측면 벽면 중앙에 위치하는 두 가지 경우를 선택하였고, 수신기의 위치는 실내 공간의 중심선과 측면 벽을 따라 움직이며 수신 전력을 측정하였다. 각각의 송수신기 위치변화에 대하여 3GHz와 6GHz의 수신 전력을 측정하고 시뮬레이션 예측 결과와 비교하였다. 송신기의 위치 및 주파수 대역 변화에 따라 각 수신점에서 수신 전력의 변화를 분석하였다.

• 한국산학기술학회논문지
• /
• 제11권11호
• /
• pp.4537-4542
• /
• 2010

본 논문에서는 차량 내부에서 발생되는 안테나 방사패턴의 변화를 관찰하기 위해 모노폴 안테나를 사용하여 차량 내부에서 안테나의 방사패턴을 측정하였다. 다수의 반사파가 존재하는 좁은 공간에서는 안테나의 특성이 변해 무선 통신 환경에 영향을 끼칠 수 있다. 그러므로 실제 차량 내부에서 제공되는 무선 통신 서비스인 GPS 와 Wibro 동작 주파수 대역에서 안테나 방사패턴에 대한 모의실험과 측정실험을 수행하였다. 모의실험은 광선추적법을 기반으로 하였으며 측정실험은 각 동작 주파수 대역을 중심 주파수로 갖는 두 쌍의 모노폴 안테나를 제작하여 자유공간과 차량 내부에서 주파수에 따라 방사패턴을 측정하였다. 모의실험과 측정실험의 결과를 바탕으로 차량 내부와 자유공간에서의 안테나 방사패턴을 비교하였을 때 안테나의 전방향성 특성을 유지되며, 차량 내부에서 안테나의 수신전력이 자유공간에서의 결과보다 증가하는 것을 확인 할 수 있었다. 또한 주파수가 증가할수록 자유공간과 차량 내부에서의 수신전력 차이가 증가하는 것을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1392-1393
• /
• 2011

This paper proposes fuzzy logic control maximum power point tracking(FLC MPPT) of photovoltaic(PV) pump system using IPMSM. Conventional MPPT controller was unstable by reason of the ripple-current of DC link in three phase inverter. Thus in this paper the control algorithm of IPMSM using $i_q$ current is composed to improve the insecurity of conventional MPPT controller. Proposed algorithm is operated by simulation with variation radiation condition. And analyze the response characteristic of IPMSM. The validity of this paper is proved by analyzed data.

• 한국통신학회논문지
• /
• 제25권6B호
• /
• pp.114-114
• /
• 2000

In this paper, a current comparative frequency automatic tuning circuit for the CMOS bandpass filter are designed with the new architecture. And also, when the designed circuit is compared the typical tuning circuit, it has very simple architecture that is composed of the current comparator and charge pump and operated in 2V power supply. The proposed tuning circuit automatically compensate the difference between the operating current of the integrator and the reference current which is specified. Using CMOS 0.25um parameter, a CMOS bandpass active filter with center frequency(f0= 100MHz) is designed, and according to the transister size the variation of the center frequency is simulated. As the HSPIC simulation results, the tuning operating of the proposed current comparative frequency automatic tuning circuit is verified.

• 전기학회논문지
• /
• 제58권1호
• /
• pp.93-99
• /
• 2009

In this paper, transient voltage response of Polmer Electrolyte Membrane Fuel Cell (PEMFC) stack is analyzed and voltage dynamic characteristic is modeled for optimal design of power conditioning system (PCS). According that the load is changed, the corresponding operating voltage of fuel cell stack is also varied with a certain deep and rising time due to the chemical and mechanical responses. This transient behavior can affect on the operation with respect of PI gain in controller, duty ratio, capacitor of capacitor and so on. So in this paper the detailed theoretical analysis of transient voltage dynamics is explained and the methodology of dynamic modeling is introduced. In addition, the validity and feasibility of the proposed dynamic model is verified by experimental results under various load conditions.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.734-738
• /
• 2002

In this paper, a novel wireless parallel operation algorithm of N+1 redundant UPS system with no control interconnections is presented. The load sharing of multiple UPS modules are controlled by Q-V droop and $P-\delta$ droop algorithm. This algorithm compensates for inverter parameter variation and line impedance imbalances with wireless auto-tuning method. And to increase the reliability of transient characteristic under parallel operation, a virtual injected Impedance is proposed to decrease a circulation current between inverter modules. Simulation results are provided to prove the novel wireless algorithm.

• Transactions on Electrical and Electronic Materials
• /
• 제7권3호
• /
• pp.99-102
• /
• 2006

The electrical characteristics of CMOS inverter with LDMOSFET are studied for high power and digital circuit application by using two dimensional MEDICI simulator. The simulation is done in terms of voltage transfer characteristic and on-off switching properties of CMOS inverter with variation of channel length and channel doping levels. The channel which surrounds a junction-type source in LDMOSFET is considered to be an important parameter to decide a circuit operation of CMOS inverter. The digital logic levels of input voltage show to increase with increase of n-channel length and doping levels while the logic output levels show to the almost constant.