• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2597-2599
• /
• 2001

This paper has developed the power line interphone system with the amplitude modulation technique. We described the Amplitude modulation and demodulation circuit and the line coupler for the implementation of the power line interphone. and suggested the experimental result for the signal attenuation, demodulated signal, spectrum.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.374-381
• /
• 2010

Typical power electronic converters employ only pulse width modulation (PWM) to generate specific switching patterns. In this paper, a novel control strategy combining both pulse-width and amplitude modulation strategies (PWAM) has been proposed for power converters. The Pulse Amplitude Modulation (PAM), used in communication systems, has been applied to power electronic converters. This increases the degrees of freedom in eliminating or mitigating harmonics when compared to the conventional PWM strategies. The role of PAM in the novel PWAM strategy is based on the control of the converter's dc sources values. Software implementation of the conventional PWM and the PWAM control strategies has been applied to a five-level inverter for mitigating selective harmonics. Results show the superiority of the proposed strategy from the THD point of view along with a reduction in the inverter power dissipation.

• 한국산학기술학회논문지
• /
• 제12권1호
• /
• pp.493-499
• /
• 2011

기존의 직교변조 (Orthogonal Modulation)는 그 효용성에 비해 대역폭 효율이 지나치게 떨어져 이를 개선하기 위한 다중부호 트랜스직교변조 (MCTO: Multi-Code Trans-Orthogonal Modulation)가 제안되었다. 그러나 MCTO 변조는 송신신호의 진폭이 일정하게 유지되지 않아 RF (Radio Frequency) 단에 포함되어 있는 전력 증폭기 (Power Amplifier)의 부담이 커지게 되는 문제점이 있다. 따라서 본 논문에서는 다중부호 신호를 정진폭으로 부호화하는 방식을 이용한 정진폭 다중부호 트랜스직교변조 (CAMCTO: Constant-Amplitude Multi-Code Trans-Orthogonal Modulation)를 제안한다. 또한 제안된 CAMCTO 변조의 성능을 실험을 통해 제시하고 기존의 직교변조 및 MCTO 변조와 비교한다. 실험 결과에 의하면 제안된 CAMCTO 변조는 기존의 직교변조에 비해 대역폭 효율은 매우 증가하며 MCTO 변조에 비해 RF의 부담을 매우 경감시킬 수 있음을 알 수 있다.

• 한국안광학회지
• /
• 제12권4호
• /
• pp.107-110
• /
• 2007

농촌지역 50대~80대 남녀 137명을 대상으로 자동 안굴절력계에 의한 원용 교정도수 측정, Trial frame와 Trial lens set을 사용한 근용 도수 측정, 최대조절력의 1/2과 2/3를 사용하였을 때의 유효조절력 산정 등을 통하여 조절력을 분석해 보았다. 그 결과 50대에서는 1.84~2.46D, 60대에서는 1.55~2.06D, 70대에서는 1.43~1.90D, 80대에서는 1.22~1.62D로 조사되어 기존에 알려진 나이에 따른 조절력에 비해 다소 높게 나타났다.

• ETRI Journal
• /
• 제33권5호
• /
• pp.679-688
• /
• 2011

A new discrete-amplitude pulse width modulation (DAPWM) scheme for a high-efficiency linear power amplifier is proposed. A radio frequency (RF) input signal is divided into an envelope and a phase modulated carrier. The low-frequency envelope is modulated so that it can be represented by a pulse whose area is proportional to its amplitude. The modulated pulse has at least two different pulse amplitude levels in order that the duty ratios of the pulse are kept large for small input. Then, an RF pulse train is generated by mixing the modulated envelope with the phase modulated carrier. The RF pulse train is amplified by a switching-mode power amplifier, and the original RF input signal is restored by a band pass filter. Because duty ratios of the RF pulse train are kept large in spite of a small input envelope, the DAPWM technique can reduce loss from harmonic components. Furthermore, it reduces filtering efforts required to suppress harmonic components. Simulations show that the overall efficiency of the pulsed power amplifier with DAPWM is about 60.3% for a mobile WiMax signal. This is approximately a 73% increase compared to a pulsed power amplifier with PWM.

• 한국전기전자재료학회논문지
• /
• 제29권7호
• /
• pp.424-428
• /
• 2016

In this paper, the power burden of High-TC superconducting (HTSC) module comprising the flux-lock type superconducting fault current limiter (SFCL) with two triggering currents during the fault period was analyzed. The short-circuit tests for the simulated power system with the SFCL in the different fault positions, which were expected to affect the amplitude of the fault current, were carried out. Through the comparative analysis on the power burden of the HTSC modules, the proposed flux-lock type SFCL was confirmed to be effective to divide into two power burdens according to the amplitude of the fault currents.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제12권2호
• /
• pp.162-166
• /
• 2012

The instantaneous amplitude (IA) based on the higher order differential energy operator is proposed. And its general form for arbitrary order is also proposed. The various definitions of the IA and the instantaneous frequency (IF) estimators are considered. The IA and IF estimators based on the energy operators need less computational cost than the conventional IF and IA estimators exploiting the Hilbert transform. The IF and IA estimators are compared in terms of the frequency and amplitude tracking accuracy of the AM-FM signals. For noiseless case, the IA and IF estimators based on the Teager-Kaiser energy operator show better tracking performance than the IF and IA estimators based on the higher energy operators. However, under noisy condition, the IF and IA estimator based on the higher order energy operators with the order 3 and 4 show better tracking than the Teager-Kaiser energy based estimators. The IF and IA estimators are applied to signals in the various power anomalies to show their usefulness as the disturbance detectors.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1407-1414
• /
• 2016

Unlike existing pulse-width modulation (PWM) techniques, such as sinusoidal PWM and random PWM, the wavelet PWM (WPWM) technique based on a Harr wavelet function can achieve a high fundamental component for the output voltage, low total harmonic distortion, and simple digital implementation. However, the original WPWM method lacks output voltage control. Thus, the practical application of the WPWM technique is limited. This study proposes an improved WPWM technique that can regulate output voltage amplitude with the addition of a parameter. The relationship between the additional parameter and the output voltage amplitude is analyzed in detail. Experimental results verify that the improved WPWM exhibits output voltage control in addition to all the merits of the WPWM technique.

• Journal of Power Electronics
• /
• 제9권5호
• /
• pp.748-756
• /
• 2009

This paper presents a compensation algorithm for position error due to an amplitude imbalance between resolver output signals. Resolvers are typically used to obtain absolute position information for motor drive systems in severe environments. Position error is caused by an amplitude imbalance of the resolver output signals. As a result, the d- and q-axis currents of synchronous reference frame have periodic ripples in the stator fundamental frequency in permanent magnet synchronous motor (PMSM) drive systems. Therefore, this paper proposes a compensation algorithm to reduce the position error generated by the amplitude imbalance. The proposed method does not require any additional hardware, and reduces computation time with a simple integral operation according to rotor position. In addition, the position error can be directly compensated for by the estimated position error. The effectiveness of the proposed compensation algorithm is verified through several simulations and experiments.

• 전력전자학회논문지
• /
• 제19권4호
• /
• pp.320-326
• /
• 2014

In this paper, the new smart dimming algorithm which is mixed with PWM and PAM control method is proposed for reducing the power consumption of LED TV Backlight. The proposed technique is using the curve characteristics of LED forward voltage and current which is proportionally changing LED forward voltage as changing LED forward current. Therefore, each PWM and PAM control method has different LED forward voltage and current in the same brightness condition. The PWM control method adjusts the brightness of LED TV Backlight by only varying the duty ratio of PWM and constantly sustaining the amplitude of LED forward current and voltage. So, the level of LED forward current and voltage in the PWM control method is relatively high and constant regardless of duty ratio of PWM. On the other hand, the PAM control method adjusts the brightness of LED TV Backlight by directly varying the level of LED forward current. So, the level of LED forward current and voltage in the PAM control method is lowered according to the brightness level. For the above-mentioned reason, the PAM control method has the advantage of reducing the total power consumption of LED TV Backlight at the brightness condition of below 100%, compared with PWM control method. By implementing this characteristic to LED driver circuit with control algorithm in MCU, the power consumption of LED TV Backlight can expect to be reduced. The effectiveness of the proposed method, new smart dimming algorithm, CPWAM(=Conditional Pulse Width Amplitude Modulation), has been verified by experimental results.