• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(1)
• /
• pp.464-470
• /
• 1997

Severe accident analysis has been performed for the Wolsung nuclear power plants in Korea to investigate severe accident phenomena of CANDU-600 reactors as a part of Level II PSA study. The accident sequence analyzed in this paper is loss of active heat sinks(LOAH) which is caused by loss of off-site power, diesel generators, and DC power. ISAAC (Integrated Severe Accident Analysis Code)computer code developed by KAERI (Korea Atomic Energy Research Institute) was used in this analysis. This paper describes the important thermal-hydraulics and source term behaviors in the primary system and inside containment, and the failure mechanism of calandria vessel and containment. In addition, some insights for accident management program(AMP) are also given.

• Korean Chemical Engineering Research
• /
• 제50권1호
• /
• pp.128-134
• /
• 2012

석탄화력 발전소의 연소 배가스를 시간당 1,000 $Nm^3$을 처리할 수 있는 이산화탄소 분리용 pilot plant를 설치하여 화학흡수제인 mono-ethanolamine(MEA)과 2-amino-2-methyl-1-propanol(AMP)를 이용해서 운전특성을 연소 배가스 유량과, 흡수용액 순환유량을 주 실험변수로 분석하였다. MEA 20 wt%를 기준으로 연소 배가스 유량이 100 $m^3/hr$ 감소할수록 이산화탄소 제거율이 평균 6.7% 증가하였으며 흡수용액 순환유량이 1,000 kg/hr 증가에 따라 이산화탄소 제거율은 약 2.8% 상승하였고 $110^{\circ}C$ 재가열기 온도에서 90% 이상의 이산화탄소 제거효율을 나타냈다. MEA가 AMP보다 높은 제거효율을 보였고 MEA(20 wt%) 실험에서 이산화탄소의 제거율이 75.5%인 ASPEN plus의 모사 결과보다 10% 높은 85.5%로 나타났다.

• 조명전기설비학회논문지
• /
• 제28권4호
• /
• pp.21-28
• /
• 2014

Daily use characteristics of apparent power supplied to distribution transformer can be separated into two different time zone of waking hours and sleeping hours. In sleeping hours, using amount of power is decreasing. The actual curve of power seemed to be quite similar to this kind of separation. Inserting a condenser into a circuit in each different time zone led to maximize power factor of the transformer. The compensating condenser's on/off time is controlled by hysteresis circuit utilizing op amp and power factor of the transformer was improved from 0.945 to 0.999. As a result, the average of current reduction was 2.53A per hour of transformer.

• 조명전기설비학회논문지
• /
• 제20권9호
• /
• pp.24-31
• /
• 2006

This study developed a human robot mast arm, which has a structure similar to the human arm, with the objective of taking over human works. The robot arm was structured to reproduce human actions using three axes on each of the shoulder and the wrist based on mechanics, and the actuator of each axis adopted an ordinary DC motor. The servo system of the actuator is a one body type employing an amp for electric power, and it was designed to be small and lightweight for easy installation. We examined the posture control characteristics of the developed robot mast arm in order to test its interlocking, continuous motions and reliability.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권1호
• /
• pp.75-87
• /
• 2012

A design paradigm using sequential geometric programming is presented to accurately design CMOS op amps with BSIM3. It is based on new adaptive modeling of transistor parameters through the operating point simulation. This has low modeling cost as well as great simplicity and high accuracy. The short-channel dc, high-frequency small-signal, and short-channel noise models are used to characterize the physical behavior of submicron devices. For low-power and low-voltage design, this paradigm is extended to op amps operating in the subthreshold region. Since the biasing and modeling errors are less than 0.25%, the characteristics of the op amps well match simulation results. In addition, small dependency of design results on initial values indicates that a designed op amp may be close to the global optimum. Finally, the design paradigm is illustrated by optimizing CMOS op amps with accurate transfer function.

• 전기전자학회논문지
• /
• 제11권1호통권20호
• /
• pp.38-45
• /
• 2007

A new 8-bit single-slope ADC using analog RAMP generator with digitally controllable dynamic range has been proposed and simulated for column level or per-pixel CMOS image sensor application. The conversion gain of ADC can he controlled easily by using frequency divider with digitally controllable diviber ratio, coarse/fine RAMP with class-AB op-amp, resistor strings, decoder, comparator, and etc. The chip area and power consumption can be decreased by simplified analog circuits and passive components. Proposed frequency divider has been implemented and verified with 0.65um, 2-poly, 2-metal standard CMOS process. And the functional verification has been simulated and accomplished in a 0.35$\mu$m standard CMOS process.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.457-458
• /
• 2008

This paper presents an output common mode current compensation method to achieve both constant Gm and constant gain. A conventional rail-to-rail CMOS op-amp with constant Gm was designed by using complementary differential input stage and current compensation skills. But it doesn't operate constant gain, because of output resistance variation. With $0.18{\mu}m$ CMOS process, the simulation results show that the differential gain variation can achieve less than 1.3dB. And a 60dB gain, a 13.5MHz unity gain-frequency, and 1mW power consumption, when operating at 1.8V and 10pF load.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.313-316
• /
• 2002

A SRM inverter has very low switching frequency. This results in reducing the burden for a high-speed of the gate-amp interface circuit. and the linearity of optocoupler is used to protect the intanteneous peak current for the stable operation In this paper, series resistor is used to equal the current sharing of each switching device and a linear gate-amp is proposed to protect the intanteneous peak current which occurs in transient state.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.3210-3212
• /
• 2000

We designed and manufactured 300MHz NMR RF Transceiver. NMR system is composed of NMR Spectrometer, Superconductive Magnet and Pulse Programmer, GUI. NMR RF Transceiver is composed of transmitter, receiver, frequency synthesizer. T/R switch, main power amp., RF coil. To phase modulation, transmitter is composed of mixer, splitter and combiner et al. To weak signal detection, receiver is composed of pre-amp., filter, mixer et al. Each module is manufactured PCB. And installed NMR system to detect chemical component of specimen. In result, we can get the information of specimen.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2000년도 추계종합학술대회논문집
• /
• pp.237-240
• /
• 2000

본 논문에서는 ISM(Industrial Scientific Medical) 대역 424MHz부터 429MHz까지의 범위에서 동작하는 열차 후부 감시제어 시스템용 RF 전력증폭기를 설계 및 제작하였다. 424MHz대역에서의 2W급 대전력 증폭기의 설계방법으로는 Double Stub Tuner구조를 이용하여 최적 부하 임피던스를 추출하는 방법을 제시하였고, 초고주파 시뮬레이터인 Serenade8.0을 사용하여 Drive_amp와 LPF를 설계하였다. 제작된 Drive_amp와 LPF의 성능 및 특성은 시뮬레이션 한 결과와 거의 일치하였으며, 대전력 증폭기의 측정결과로는 추출하고자 하는 출력 레벨인 33㏈m을 얻을 누 있었고, 원신호의 Hamonic 주파수 성분과는 40.34㏈c의 결과를 보임으로써 안정된 전력증폭기를 구현하였다.