• Journal of Soil and Groundwater Environment
• /
• v.12 no.3
• /
• pp.29-35
• /
• 2007

Titanium was oxidized with oxygen plasma and calcinated with rapid thermal annealing for degradation of humic acid dissolved in water. Titania photocatalytic plate was produced by titanium surface oxidized with oxygen plasma by Plasma Enhanced Chemical Vapor Deposition (PECVD). RF-power and deposition condition is controlled under 100 W, 150 W, 300 W and 500 W. Treatment time was controlled by 5 min and 10 min. The film properties were evaluated by the X-ray Photoelectron Spectroscopy (XPS) and X-Ray Diffraction (XRD). From the experimental results, we found the optimal condition of titania film which exhibited good performance. Moreover photocatalytic capacity was about twice better than thermal spray titania film, and also as good as titania powder.

• Journal of the Korean Ceramic Society
• /
• v.51 no.5
• /
• pp.466-471
• /
• 2014

Hydrous zirconia particles were prepared from $ZrOCl_2$ aqueous solution using an electro-dialysis [ED] process. For the preparation of $(Zr,Y)(OH)_4$ precipitates, 3 mol% $YCl_3$ was added into $ZrOCl_2$ aqueous solution. During the hydrolysis of 0.5 mol/L $(Zr,Y)OCl_2$ solution at $90^{\circ}C$ a slurry solution was obtained. The ED process was used for the removal of chlorine from the slurry solution. Two kinds of slurry solution were sampled at the beginning and end of the ED process. The morphology of hydrous zirconia particles in the solution was observed using an inverted optical microscope and an FE-SEM. The hydrous zirconia particles were nano-crystalline, and easily coagulated with drying. Yttrium stabilized zirconia [YSZ] powder could be obtained by the calcination of $(Zr,Y)(OH)_4$ precipitates prepared from a $(Zr,Y)OCl_2$ solution by the ED process. The coagulated dry powders were shaped and sintered at $1500^{\circ}C$ for 2 h. The sintered body showed a dense microstructure with uniform grain morphology.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.935-940
• /
• 2001

This study search for absorbing sound and exhaust-gas which aims to manufacture continuous void by using clay and foam, the surface of materials is covered with $TiO_{2}$ powder as heat treatment. According to the results of the experiment, the increase of thickness of manufactured sound absorbing materials caused the increase of absorption rate in the range of low and middle sound and thus it can be an important factor of improving absorption rate. Sound absorbing materials could satisfy 70% of the average of sound absorption ratio in 7cm thickness. Also, the manufactured sound absorbing materials is covered with $TiO_{2}$ showed an excellency in the clarification of exhaust-gas under ultraviolet rays treatment when 70% of removal rate and about 10% of generation rate of $NO_{2}$ is settled by the flow of 2 $\ell$/min NO gas. Especially, manufactured sound absorbing materials could improve compressive strength of continuos porous concrete. in the case of 7% bubble addition, when the substitution rate of coagulator was 30% and 20%, compressive strength was 45kgf/$cm^{2}$ and 65kgf/$cm^{2}$ respectively. As the substitution rate of coagulator reducing, compressive strength increased after preforming burnt clay.

• Journal of Environmental Science International
• /
• v.13 no.2
• /
• pp.161-165
• /
• 2004

This study has been conducted to develop a new recycling technology of sewage sludge using a carbonization process. The carbonizing yield, the calorific value and EC(electric conductivity) of carbonized sewage sludge had a tendency to be decreased with increase of the carbonizing temperature and time, but pH and the C/N were increased with increase the carbonizing temperature and time. The whole pore volume of carbonized sludge processed in the carbonizing furnace was /g, which was smaller than that in the electric furnace. But, the rates of mesopore and macropore were found to account for 100% therein. Rate of color and organic materials removal for dyeing wastewater were determined 70~97%, 78~83% on cotton yarn, 88~96%, 69~80% on wool wastewater and 77~89%, 77~87% on towel compared with powder activated carbon. Effect of carbonized sludge on chrysanthemum growth was investigated. Plant height and number of leaves was better mixture of carbonized sludge than comparison.

• Biomedical Science Letters
• /
• v.16 no.1
• /
• pp.33-38
• /
• 2010

Culinary herbs and spices have received much attention since they contain high concentrations of bioactive ingredients for antioxidant and anti-inflammatory activities. Protection effect of the herb and spice against acute alcohol consumption has been investigated using zebrafish as a vertebrate model. During 30 days bathed in water containing 1% Et-OH and the designated herb or spice, the survival rate of the Et-OH group was decreased sharply (up to 20% at 10 days). The cinnamon-fed group showed the highest and longer survival rate up to 80% up to for 30 days under the presence of Et-OH, while clove-fed group showed 40% survival rate for 25 days. Et-OH group serum exhibited the weakest antioxidant ability from ferric ion removal ability (FRA) assay; FRA ability was increased in the cinnamon-fed group up to 414%, while the clove and laurel group increased 256% and 309%, respectively. Histologic observation and Oil-red O staining showed hepatic tissue damage was severe in the Et-OH group. The cinnamon- or clove-fed group showed much ameliorated hepatic tissue morphology with minimized steatosis. The cinnamon- or clove-fed group showed lower serum GOT and GPT levels than the Et-OH group. Among hepatic tissue extract, the clove-fed group exhibited the lowest level of GOT and GPT. These results suggest that consumption of cinnamon and clove might be beneficial to attenuate progress of acute fatty liver change by alcohol consumption.

• Environmental Engineering Research
• /
• v.22 no.4
• /
• pp.401-406
• /
• 2017

Ammonia, $NH_3$, is a key chemical widely used in chemical industries and a toxic pollutant that impacts human health. Thus, there is a need for the development of effective adsorbents with high uptake capacities to adsorb $NH_3$. An adsorbent with a high surface area and a small pore size is generally preferred in order to have a high capacity for the removal of $NH_3$. The use inorganic nanoporous materials as gas adsorbents has increased substantially and emerged as an alternative to zeolite and activated carbon. Herein, mesoporous alumina (MA) was prepared and used as an $NH_3$ adsorbent. MA showed good pore properties such as a uniform pore size and interlinked pore system, when compared to commercial adsorbents (activated carbon, zeolite, and silica powder). MA has free hydroxyl groups, serving as useful adsorption sites for $NH_3$. In an adsorption isotherm test, MA exhibited 4.7-6.5 times higher uptake capacities for $NH_3$ than commercial adsorbents. Although the larger surface areas of adsorbents are important features of ideal adsorbents, a regular and interlinked adsorbent pore system was found to be a more crucial factor to adsorb $NH_3$.

• Journal of Korean Society on Water Environment
• /
• v.25 no.5
• /
• pp.750-757
• /
• 2009

The ammonium ion exchange characteristics of natural zeolite were investigated to remove ${NH_4}^+-N$. The effect of water temperature, particle size and competitive cation on the exchange capacity was examined. Ammonium ion exchange capacity tended to decrease when the temperature increased from $25^{\circ}C$ to $40^{\circ}C$. Exchange capacity was increased according to the particle size of natural zeolite comes to be small. Batch isotherm experiments were conducted for measuring ammonium ion exchange capacity. The ion exchange capacity was well described either by the Langmuir isotherm model or by the Freundlich isotherm model. The ammonium ion exchange capacity ($q_m$) of zeolite carrier can be calculated $11.744mg-{NH_4}^+/g$-carrier. The ion exchange capacity of manufactured zeolite carrier was showed a similar tendency as ion exchange capacity of powder-sized natural zeolite. Therefore, zeolite carrier can be used for increasing of nitrogen removal efficiency in the wastewater treatment plants.

• KSBB Journal
• /
• v.22 no.5
• /
• pp.336-340
• /
• 2007

Supercritical carbon dioxide was used to remove coffee odors. The odor removal efficiency was tested with coffee drink prepared by the espresso extraction method. Five typical odors in coffee were analyzed with GC and these odors in deodorized coffee were compared to those in control. Supercritical carbon dioxide extraction conditions were optimized as 350 bar and 70$^{\circ}C$ because the solvating power of supercritical fluid is depend on the density which is determined by temperature and pressure. A modified head space method was applied to collect coffee odors in coffee drink prepared by the espresso extraction method. Odors generated in coffee drink made with deodorized coffee powder were reduced by 73% in total mass of typical five coffee odors.

• Journal of the Korean Ceramic Society
• /
• v.48 no.1
• /
• pp.6-13
• /
• 2011

In this study, we used activated carbon (AC) and charcoal (CH) as carbon sources with $TiO_2$ powder to prepare spherical carbons containing titania (SCCT) by using phenolic resin (PR) as a bonding agent. The physicochemical characteristics of the SCCT samples were examined by BET, XRD, SEM, EDX, iodine adsorption and compressive strength. The photocatalytic activity was evaluated by measuring the removal efficiency of three kinds of organic dyes: methylene blue (MB), methyl orange (MO) and rhodamine B (Rh.B) under a UV/SCCT system. In addition, evaluation of chemical oxygen demand (COD) of piggery waste was done at regular intervals and gave a good idea about the mineralization of wastewater.

• Journal of Forest and Environmental Science
• /
• v.32 no.2
• /
• pp.103-112
• /
• 2016

To compare seed components of plus trees, seed powder ground after seedcoat removal was analyzed for two oak species, i. e., Quercus monglica (white oak) and Quercus variabilis (red oak), which are typical oak trees in Korea but have different fruiting characteristics. Thus we aimed at analyzing and comparing many ingredients including minerals, sugars, etc. Two species were similar to each other in the content of water, crude ash, crude protein and carbohydrates, but crude lipid content in Q. variabilis was 2.5 times higher than that in Q. mongolica. Crude proteins of Clone 124 was 1.5 times higher than that of Clone 75 in Q. mongolica. Crude lipid content showed the highest value in Clone 0511 of Q. variabilis, and more phosphate and iron was found in Q. monglica than in Q. variabilis. Glucose showed 85.4% and 88.3% on average of the total monosacchrides in two species, and galactose and arabinose were also found. In the content of phosphate, iron, and crude lipid, differences were found between two species and among clones of two species.