• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.7
• /
• pp.1071-1076
• /
• 2016

The feasibility of incorporating aronia powder (AP) as a value-added food ingredient into convenient food products was investigated using cookie as a model system. AP was incorporated into cookies at amounts of 0, 1, 2, 3, and 4% (w/w) based on total weight of wheat flour. The pH level of cookie dough decreased significantly with increasing levels of AP (P<0.05), whereas moisture content and density were not directly affected by levels of AP incorporation. The spread ratio increased significantly upon addition of AP; however, it was not significantly affected by level of AP incorporation. The loss rate of cookies decreased significantly with increasing levels of AP (P<0.05). In terms of color, lightness and yellowness decreased while redness increased significantly (P<0.05) with increasing levels of AP. Use of AP significantly decreased hardness of cookies (P<0.05), but no significant differences were found between control and 1% sample, 1% and 2% sample, 2% and 3% sample, and 3% and 4% sample (P>0.05). 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis-3-ethylbenzthiazoline-6-sulphonic acid (ABTS) radical scavenging activities were significantly elevated by AP addition, and they increased significantly as AP concentration increased in the formulation (P<0.05). Correlation analysis indicated that acceptances of color and chewiness were negatively correlated well with the level of AP incorporation, density and moisture content of cookie dough, and cookie redness, whereas they were positively correlated with pH of cookie dough, loss rate, and hardness (P<0.01 or P<0.05). Finally, consumer acceptance test indicated that the highest levels of AP incorporation (4%) had an adverse effect on general consumer preferences. In contrast, cookies with moderate levels of AP (2%) are recommended based on overall scores to take advantage of the antioxidant properties of AP without sacrificing consumer acceptability.

• Journal of Life Science
• /
• v.23 no.3
• /
• pp.432-442
• /
• 2013

In this study, we examined the biological activity and synergistic effects of an extract powder of 1% and 3%, each fresh (FGP) and black garlic (BGP) in streptozotocin-induced diabetic rats. Blood glucose content was significantly lower in FGP and BGP groups than control group. Glycosylated Hb was significantly higher in streptozotocin induced diabetic control group than normal group, but significantly lower in FGP and BGP groups. Total cholesterol content of the FGP and BGP groups were lower than control group, but not shown the significant difference between garlic fed groups. HDL-cholesterol concentrations of the FGP and BGP fed groups were significantly higher than control group, except of 1% BGP group. LDL and VLDL-cholesterol contents were significantly lower in 3% FGP group, and the same tendency atherogenic index and cardiac risk factor. GOT, GPT, and ${\gamma}$-GTP activity of serum were lower in FGP and BGP fed groups than control group. Glycogen contents in liver significantly higher than control group, and has not significantly difference between normal group. TBARS content was no significantly difference in the liver and serum, but in the kidney, 3% FPG and BGP fed groups were significantly lower than other experimental group. DPPH radical scavenging activity of liver has not significant difference among experimental groups, but activity was higher garlic extract powder fed groups in serum and kidney. These results indicate that dietary supplements of fresh and black garlic extract powder was contributed to lower of blood glucose, loss prevention of glycogen in liver and improve of lipid metabolism.

• Resources Recycling
• /
• v.31 no.4
• /
• pp.56-65
• /
• 2022

Copper is one of the non-ferrous metals used in the electrical/electronic manufacturing industries due to its superior properties particularly the high conductivity and less resistivity. The effluent generated from the surface finishing process of these industries contains higher copper content which gets discharged in to water bodies directly or indirectly. This causes severe environmental pollution and also results in loss of an important valuable metal. To overcome this issue, continuous R & D activities are going on across the globe in adsorption area with the purpose of finding an efficient, low cost and ecofriendly adsorbent. In view of the above, present investigation was made to compare the performance of a plant root (Datura root powder) as a bio-adsorbent to that of the synthetic one (Tulsion T-42) for copper adsorption from such effluent. Experiments were carried out in batch studies to optimize parameters such as adsorbent dose, contact time, pH, feed concentration, etc. Results of the batch experiments indicate that 0.2 g of Datura root powder and 0.1 g of Tulsion T-42 showed 95% copper adsorption from an initial feed/solution of 100 ppm Cu at pH 4 in contact time of 15 and 30 min, respectively. Adsorption data for both the adsorbents were fitted well to the Freundlich isotherm. Experimental results were also validated with the kinetic model, which showed that the adsorption of copper followed pseudo-second order rate expression for the both adsorbents. Overall result demonstrates that the bio-adsorbent tested has a potential applicability for metal recovery from the waste solutions/effluents of metal finishing units. In view of the requirements of commercial viability and minimal environmental damage there from, Datura root powder being an effective material for metal uptake, may prove to be a feasible adsorbent for copper recovery after the necessary scale-up studies.

• Food Science and Preservation
• /
• v.22 no.2
• /
• pp.204-210
• /
• 2015

This study investigated the quality characteristics of sponge cake by introduction of buckwheat powder (BP). Cake batter was prepared by substituting wheat flour with an equivalent amount of BP based on weight. Sponge cakes were prepared with different amounts of BP (0, 10, 20, and 30%, respectively). Their physicochemical and sensory properties were tested. The specific gravity was not affected by the addition of BP (10~30%) (p<0.05). The lightness (L value) and yellowness (b value) of the crumb significantly decreased with the increase in the BP contents (p<0.05), whereas the redness (a value) increased (p<0.05). As the increase in the amount of BP addition, the hardness, cake volume (mL), baking loss rate (%), and specific volume (mL/g) significantly decreased (p<0.05). On the contrary, the cake weight increased. In the sensory evaluation, no significant differences in terms of color, taste, texture, flavor, and overall acceptance were observed among the different amout of BP addition (0~20%) (p<0.05). Overall, the sponge cake prepared with the addition of 20% BP was recommended to use due to its advantages in functional property.

• Clean Technology
• /
• v.12 no.2
• /
• pp.53-61
• /
• 2006

A PGSS (Particles from Gas Saturated Solutions) process designed to generate nano-particles using supercritical fluids has been conducted for the fabrication of Poly(lactide-co-glycolide) (PLGA) microparticles that encapsulate a protein drug. It is demonstrated that the polymer and the dry powder of a protein can be mixed under supercritical carbon dioxide conditions and that the protein component retains its biological activity. In this experiment, the mixture of polymer which is plasticized and dry powder protein was sprayed to form solid polymer that encapsulate the protein. It is found that supercritical fluid process give fine tuning of particle size and particle size distribution by simple manipulations of the process parameters. Porous particles were formed with irregular shape. Protein encapsulated in the polymer was found to have enzymatic activity without significant loss of its initial value.

• Journal of the Korean Ceramic Society
• /
• v.41 no.12 s.271
• /
• pp.929-932
• /
• 2004

It is known that small amount of MgO in excess is often added to develop pure perovskite single phase of PMN-based composite, however, extra MgO precipitates in grains and inhibits densification of PMN. In this study PMN-PT-BT (PBT) powder was prepared by a conventional mixed oxide method using $(MgCO_3)_4{\cdot}Mg(OH)_2{\cdot}5H_{2}O$ instead of MgO. The precursor was heated at $500^{\circ}C/1h$ and its surface was modified with MgO sol. This effect was investigated in the aspects of sintering and dielectric properties. Small amount of added MgO sol ($0.5{\sim}1.0wt\%$) enhanced sintering substantially below $1000^{\circ}C$. The PBT with $0.5wt\%$ MgO sol sintered at $900^{\circ}C/2h$ had density of $7.62\;g/cm^3$, room temperature dielectric constant of 14800, loss of dielectric constant of $1.1\%$, which were comparable to those of the PBT sintered at $1000^{\circ}C/2h$. It was noticeable that the extra MgO precipitated mostly on triple points and grain boundaries and resulted in inhibition of grain growth.

• Korean Journal of Materials Research
• /
• v.21 no.1
• /
• pp.8-14
• /
• 2011

To improve the chemical stability of metal, the ceramic coatings on metallic materials have attracted interest from many researchers due to the chemical inertness of ceramic materials. To endure strong acids, SiOC coating on metal substrate was carried out by dip coating method using 20wt% polyphenylcarbosilane solution; SiC powder was added to the solution at 10wt% and 15wt% to improve the mechanical properties and to prevent cracks of the film. Thermal oxidation as a curing step was carried out at $200^{\circ}C$ for crosslinking of the polyphenylcarbosilane, and the coating samples were pyrolysized at $800^{\circ}C$ under argon to convert the polyphenylcarbosilane to SiOC film. The thicknesses of the SiOC coating films were $2.36{\mu}m$ and $3.16{\mu}m$. The quantities of each element were measured as $SiO_{1.07}C_{6.33}$ by EPMA, and it can be confirmed that the SiOC film from polyphenylcarbosilane was formed in a manner that was carbon rich. The hardness of the SiOC film was found to be 3.2Gpa through nanoindentor measurement. No defect including cracks appeared in the SiOC film. The weight loss of the SiOC coated stainless steel was within 2% after soaking in 10% HCl solution at $80^{\circ}C$ for one week. From these results, SiOC coating shows good potential for application to protect against severe chemical corrosion of stainless steel.

• Food Science and Preservation
• /
• v.18 no.1
• /
• pp.33-38
• /
• 2011

We investigated the quality characteristics of cookies prepared after addition of various concentrations of used coffee grounds (0%, 1%, 3%, and 5%, all w/w) as a substitute for flour. As coffee grounds concentration rose, decrease in the pH of cookie dough was evident. In terms the water-holding capacity of dough, cookies prepared 3% (w/w) coffee grounds yielded the highest value. With an increase in coffee grounds concentration, the color a value rose, but the L and b values fell. The gelatinization temperature became higher, but both peak viscosity and 15 min-height values declined. The spread and loss ratios decreased but the leavening rate rose significantly with elevation of coffee grounds concentration. The hardness of cookies rose but slightly, as coffee grounds concentration rose. Upon sensory evaluation of all of appearance, flavor, and overall preference, cookies prepared with addition of used coffee grounds were superior to those without grounds, whereas those prepared using 1%-3%(w/w) coffee grounds showed the highest overall acceptability. Thus cookies made using coffee grounds can be economically competitive. In addition, the ingredients of coffee powder and used coffee grounds were shown to be very similar, except that coffee grounds contain 15-fold less caffeine than dose coffee powder. As health concerns are popular today, the use of coffee grounds to manufacture processed food may be acceptable.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.70-77
• /
• 2010

This study is to investigate experimentally the influence of mixing factors, such as a mortar mix proportion of non-cement mortar, flow, and W/B, on quality characteristics of blast furnace slag powder mortar incorporating dry type recycled fine aggregates. In the characteristics of fresh mortar, the W/B increased according to the increase in the flow due to the increase in water contents, but air contents decreased due to loss of air contrary to the increase in the W/B. In the case of hardened mortar, the compressive strength showed a decrease due to the highly determined W/B inversely according to the increase in the flow through the entire age in which the compressive strength increased proportionally according to the increase in the B/W. Also, the increasing rate of such compressive strength increased more largely due to the latent hydraulic property of the BS according to the passage of the age. The flexural strength at the age of 28 days according to the increase in the B/W represented a similar level in strength values without any increases. The flexural strength for the compressive strength was distributed as a range of 1/2 ~ 1/3 and that showed a higher range than that of conventional concretes.

• Journal of Dairy Science and Biotechnology
• /
• v.33 no.1
• /
• pp.75-82
• /
• 2015

Chitosan provides beneficial effects such as decrease in cholesterol, weight loss, and antioxidative effects. The manufacture of Maribo cheese containing powdered chitosan (CP) or nanopowdered chitosan (NCP) is not yet established. Thus, this study was conducted to determine the effect of CP and NCP on Maribo cheese's physicochemical properties. The curd was added with 0.2 and 0.5% of CP and NCP, respectively, after the second whey drainage. The pH changed and the lactic acid bacterial population decreased in all treatments. Additionally, WSN and TBA gradually increased during the ripening of cheese. The TP of control cheese was higher than that of another group. On the basis of the obtained results, consumer preference test on overall acceptability of 0.2% NCP was good-41%, great good 13%. It was concluded that the quality of Maribo cheese was not affected by adding chitosan. Furthermore, 0.2% NCP was preferred during cheese ripening and observed the possibility of functional cheese than another group.