• Journal of Powder Materials
• /
• v.27 no.6
• /
• pp.477-483
• /
• 2020

Metal-organic frameworks (MOFs) are of significant interest because of their high porosity, which facilitates their utilization in gas storage and catalysis. To enhance their current properties in these applications, it is necessary to elucidate the interactions between molecules in a confined environment that differ from those in bulk conditions. Herein, we study the confined molecular interaction by investigating the solvent-dependent photophysical properties of two different-sized molecules inside MOF-5. Ruthenium tris-bipyridine (Rubpy) and coumarin 153 (C153) are encapsulated in MOF-5. Rubpy with MOF-5 (Rubpy@MOF) is prepared by building MOF-5 around it, resulting in limited space for solvent molecules in the pores. The smaller C153 is encapsulated in the preformed MOF-5 (C153@MOF) by simply soaking the MOF in a concentrated C153 solution. C153@MOF permits more space for solvent molecules in the pore. Their characteristic absorption and emission spectra are examined to elucidate the confined molecular interactions. Rubpy@MOF and C153@MOF exhibit different spectral shifts compared to the guest molecules under bulk conditions. This discrepancy is attributed to the different micro-environments inside the pores, derived from confined host-guest interactions in the interplay of solvent molecules.

• Korean Journal of Materials Research
• /
• v.33 no.7
• /
• pp.279-284
• /
• 2023

One-dimensional MgO nanostructures with various morphologies were synthesized by a thermal evaporation method. The synthesis process was carried out in air at atmospheric pressure, which made the process very simple. A mixed powder of magnesium and active carbon was used as the source powder. The morphologies of the MgO nanostructures were changed by varying the growth temperature. When the growth temperature was 700 ℃, untapered nanowires with smooth surfaces were grown. As the temperature increased to 850 ℃, 1,000 ℃ and 1,100 ℃, tapered nanobelts, tapered nanowires and then knotted nanowires were sequentially observed. X-ray diffraction analysis revealed that the MgO nanostructures had a cubic crystallographic structure. Energy dispersive X-ray analysis showed that the nanostructures were composed of Mg and O elements, indicating high purity MgO nanostructures. Fourier transform infrared spectra peaks showed the characteristic absorption of MgO. No catalyst particles were observed at the tips of the one-dimensional nanostructures, which suggested that the one-dimensional nanostructures were grown in a vapor-solid growth mechanism.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.4
• /
• pp.193-203
• /
• 2011

The purpose of this study, looking to which the recycled fine aggregates from waste concrete have a lot of problems as a material for structure purpose, is applying the recycled fine aggregate to Self-Compacting Concrete(In the reminder of this paper, it often referred to as SCC) by using the characteristic which the powder containing the recycled fine aggregates can increase strength and liquidity. In this study, that is, the recycled fine aggregate powder is appropriate for developing high strength(over 40 MPa) and liquidity(JSCE 2 grade), the characteristic of the SCC and it was increased the ratio of mixing the recycled fine aggregates emerging from waste concrete and the normal fine aggregates by 25%, making differential in total 5 levels and applied to SCC. After all, this study was reviewed the physical properties of the fresh concrete, analyzed the mechanical properties and durability of the hardening concrete and tried to ensure the possibility of utilizing the recycled fine aggregates as a material for SCC. As a result, this study reached a conclusion that among the 5-level replacement ratios of the physical, mechanical analysis and the durability characteristics, the normal fine aggregates could be applied up to a replacement ratio of 50% more than the recycled fine aggregates and resulted in a deterioration in performance the replacement ratio larger than 50%. It is judged that the applicability of the real structures should be followed up in order to check the possibility of applying the recycled fine aggregates to real life.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.1
• /
• pp.176-181
• /
• 2009

In this work, a new type of DSCs based on nanoporous FTO structure is being developed for research aimed at low-cost high-efficiency solar cell application. The nanoporous FTO materials have been prepared through the sol-gel combustion method followed by thermal treatment at $450{\sim}850[^{\circ}C]$. The properties of the nanoporous FTO materials were investigated by IR spectra, BET and TEM analyses, and the photovoltaic performance of the prepared DSCs were examined. It can be seen from the result that the nanoporous FTO exhibited good transparent conductive properties, well suited for DSCs application.

• Journal of the Korean Institute of Gas
• /
• v.18 no.3
• /
• pp.31-37
• /
• 2014

The aim of this work is to provide new experimental data on the pyrolysis characteristics and the minimum ignition energy (MIE) by using the same high-density polyethylene (HDPE) powder in domestic HDPE dust explosion accident. To evaluate the explosion sensitivity of HDPE, thermo-gravimetric analysis (TGA), differential scanning calorimeter (DSC) and MIE apparatus (MIKE-3, K$\ddot{u}$hner) was conducted. The measurements showed the volume median diameter of $61.6{\mu}m$ but the particle number density of 98 % in the range $0.4{\sim}4{\mu}m$. The ignition temperature from the results of TGA and DSC in HDPE dust layers was observed in the range of $380{\sim}490^{\circ}C$. MIE was measured under 1 mJ in the HDPE dust concentration of $1200{\sim}1800g/m^3$, it was found that the ratio of particle number density in the range $0.4{\sim}4{\mu}m$ was very high (98%).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.1
• /
• pp.51-56
• /
• 2012

In the present study, we investigated the effect of mechanical alloying (MA) on the formation of amorphous VCo system through solid state reaction during ball milling. Two types of powder samples, ${\sigma}$-VCo intermetallic compound and $V_{50}Co_{50}$ powder mixture, were applied as a starting materials. With increasing milling time, a structural characteristics into the amorphous state is distinctly observed from the structural factor and radial distribution by X-ray diffraction. Amorphization has been observed in all two types of samples after the milling for 120 hrs. DSC spectrum of $V_{50}Co_{50}$ powder sample milled for 60 hrs indicates a sharp exothermic peak from the crystallization at $600^{\circ}C$. The structure factor, S(Q) and radial distribution function, RDF(r), observed by X-ray diffraction gradually change into a structure characteristic of an amorphous state with increasing MA time.

• Journal of the Korean Institute of Oriental Medical Informatics
• /
• v.18 no.1
• /
• pp.64-77
• /
• 2012

Donguibogam, Korea's cultural heritage and traditional Oriental medicine book listed in the World Heritage three years ago, is indeed great in its importance and value. Korea's posterity has sought treatment methods through the medical book and their researches on that book have continued. However, it is rare to make the concrete analysis on the medicines for prescriptions recorded in the book. In this study, we reviewed "Ears" in the Section "Bodily Appearance" among the five chapters of Donguibogam, and analyzed the 55 types of prescriptions for ear diseases, the medical characteristics, tastes, prime classification of medical herbs, and acupunctural effects, and the dosage forms depending on prescriptions. For insect-entering ear diseases and 20 kinds of a single-medicine prescription also, the treatments are presented in the book, but we presented the texts only and excluded them in the analysis. We also excluded overlapping prescriptions and adding and reducing prescriptions of the 55 prescriptions, and thus classified the left 42 proscriptions by dosage form. As a result: 1. With respect to medical characteristics, the medicine with warm characteristics reached 9 types(40.9%), the highest rate, followed by the medicine with cold characteristics 8 types (36.4%). 2. Concerning medical tastes, the medicine with bitter taste included 12 types (54.5%), the medicine with sour taste 10 types (45.5%), and the medicine with sweet taste 7 types (31.8%). It was unusual that of the 22 medicines used for multipurpose, no medicine with the taste was found. 3. For the acupunctural effects, the medicine with acupuncture effects for spleen medirian reached 12 types in total (54.5%). On the contrary, the medicine with the effects for pericardium meridian reached only one (4.5%) among the total of 22 medicines. 4. In the dosage form of 42 prescriptions, powder medicine was 15 types (35.7%), and decoction medicine was 14 (33.3%). Powder, dedoction, and pill medicines accounted for 90.4% of the total medicine type. It was found that in particular, for ear diseases powder medicine was used more frequently than decoction medicine.

• Korean journal of food and cookery science
• /
• v.24 no.6
• /
• pp.849-855
• /
• 2008

DPPH radical scavenging activities were 66.80% by hot water extract and 41.86% by 80% methanol extract. Inhibitions of angiotensin I-converting enzyme (ACE) were 91.09% by hot water extract and 75.20% by 80% methanol extract. In this study, Sulgidduk samples were prepared with 1, 3, 5, and 7% concentrated sweet pumpkin powder (CSPP), and a control were examined for quality characteristics such as moisture content, water activity, color, textural characteristics, and sensory qualities, in order to determine the optimal ratio of CSPP in the formulation. The samples containing CSPP exhibited significantly higher moisture content than the control group. Water activity was not significantly different among the Sulgidduk samples. For the color, the control group presented significantly higher lightness as compared to the samples containing CSPP. The samples containing 1 and 3% CSPP had significantly higher greenness than the samples containing 5 and 7% CSPP. Yellowness increased as the level of CSPP content increased. In terms of textural characteristics, hardness, gumminess, and chewiness were highest at the 1% substitution level, while lowest at the 3% level. The CSPP samples presented significantly higher adhesiveness, springiness, and cohesiveness than the control group. In the consumer acceptance and characteristic intensity rating test, the control group showed significantly higher color and flavor as compared to the CSPP samples. Pumpkin flavor, delicious taste, and off-flavor increased with increasing amounts of CSPP. Softness, overall acceptability, and gumminess were not significantly different among the various samples tested. Sweetness was highest at the 5% substitution level, while lowest at the 1% level. In conclusion, the results indicate that substituting $3{\sim}5%$ CSPP to Sulgidduk is optimal, providing good DPPH radical scavenging activity and inhibition of ACE as well as reasonably high overall acceptability.

• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.185-190
• /
• 2016

Background: In order to measure neutron energy spectra, the conventional Bonner Sphere Spectrometers (BSS) are widely used. In this spectrometer, several measurements with different size Bonner spheres are required. Operators should, therefore, place these spheres in several times to a measurement point where radiation dose might be relatively high. In order to reduce this effort, novel neutron energy spectrometer using an onion-like single Bonner sphere was proposed in our group. This Bonner sphere has multiple sensitive spherical shell layers in the single sphere. In this spectrometer, a band-shaped thermal neutron detection medium, which consists of a LiF-ZnS mixed powder scintillator sheet and a wavelength-shifting (WLS) fiber readout, was looped to each sphere at equal angular intervals. Amount of LiF neutron converter is reduced near polar region, where the band-shaped detectors are concentrated, in order to uniform the directional sensitivity. The LiF-ZnS mixed powder has an advantage of extremely high light yield. However, since it is opaque, scintillation photons cannot be collect uniformly. This type of detector shows no characteristic shape in the pulse height spectrum. Subsequently, it is difficult to set the pulse height discrimination level. This issue causes sensitivity fluctuation due to gain instability of photodetectors and/or electric modules. Materials and Methods: In order to solve this problem, we propose to replace the LiF-ZnS mixed powder into a flexible and Transparent RUbber SheeT type $LiCaAlF_6$ (TRUST LiCAF) scintillator. TRUST LiCAF scintillator can show a peak shape corresponding to neutron absorption events in the pulse height spectrum. Results and Discussion: We fabricated the prototype detector with five sensitive layers using TRUST LiCAF scintillator and conducted basic experiments to evaluate the directional uniformity of the sensitivity. Conclusion: The fabricated detector shows excellent directional uniformity of the neutron sensitivity.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.2
• /
• pp.23-30
• /
• 2008

UHPC has high performance, high strength and excellent mechanical properties. Moreover UHPC(Ultra High Performance Cementitious Composite) has advantage to reduce cross section under the same load compared with other kinds of concrete. But silica fume which is imported from foreign country has a abundant portion in UHPC mixture in comparison with normal concrete. This is one of the main reason to raise the construction cost. Superior mechanical properties of UHPC due to the optimum filling composition can be changed by replacing the very fine ingredient. The purpose of this research is to grasp the characteristic of UHPC which silica fume and silica flour is replaced with limestone powder. This experiment can be divided into three classes according to the kinds of replacement. The compressive strength and flow of all types were measured and microstructure and hydration phenomena for comparing RPC were analyzed by SEM, XRD, NMR method. As a result, the replacement can be considered to be effective by for the decrease of the UHPC structure construction cost and improvement of the fresh UHPC.