• Analytical Science and Technology
• /
• v.35 no.3
• /
• pp.136-142
• /
• 2022

According to media reports, the carcasses of euthanized abandoned dogs were processed at high temperature and pressure to make powder, and then used as feed materials (meat and bone meal), raising the possibility of residuals in the feed of the anesthetic ketamine and dexmedetomidine used for euthanasia. Therefore, a simultaneous analysis method using QuEChERS combined with high-performance liquid chromatography coupled with electrospray ionization tandem mass spectrometry was developed for rapid residue analysis. The method developed in this study exhibited linearity of 0.999 and higher. Selectivity was evaluated by analyzing blank and spiked samples at the limit of quantification. The MRM chromatograms of blank samples were compared with those of spiked samples with the analyte, and there were no interferences at the respective retention times of ketamine and dexmedetomidine. The detection and quantitation limits of the instrument were 0.6 ㎍/L and 2 ㎍/L, respectively. The limit of quantitation for the method was 10 ㎍/kg. The results of the recovery test on meat and bone meal, meat meal, and pet food showed ketamine in the range of 80.48-98.63 % with less than 5.00 % RSD, and dexmedetomidine in the range of 72.75-93.00 % with less than 4.83 % RSD. As a result of collecting and analyzing six feeds, such as meat and bone meal, prepared at the time the raw material was distributed, 10.8 ㎍/kg of ketamine was detected in one sample of meat and bone meal, while dexmedetomidine was found to have a concentration below the limit of quantitation. It was confirmed that the detected sample was distributed before the safety issue was known, and thereafter, all the meat and bone meal made with the carcasses of euthanized abandoned dogs was recalled and completely discarded. To ensure the safety of the meat and bone meal, 32 samples of the meat and bone meal as well as compound feed were collected, and additional residue investigations were conducted for ketamine and dexmedetomidine. As a result of the analysis, no component was detected. However, through this investigation, it was confirmed that some animal drugs, such as anesthetics, can remain without decomposition even at high temperature and pressure; therefore, there is a need for further investigation of other potentially hazardous substances not controlled in the feed.

• Korean journal of applied entomology
• /
• v.61 no.1
• /
• pp.221-227
• /
• 2022

In accordance with Article 6 of the 「Insect Industry Promotion and Support Act」, the National Institute of Agricultural Sciences conducted a fact-finding investigation in the insect industry for related workers in 2020. Most commonly, insect industry workers were involved in production (98.5%), the male ratio was high (80.4%), while those in their 50s comprised 36.4% of the workers. As for the uses of industrial insects, 66.5% was for food and medicine, 12.7% for feed, and 20.7% as pets. The most commonly produced industrial insect species by use were the white-spotted flower chafer (69.6%), Protaetia brevitarsis seulensis (Kolbe), for food and medicine; crickets (31.2%) for feed; and the rhinoceros beetle (45.6%), Allomyrina dichotoma (Linnaeus), as pets. Powder was the most common product form at 68.5%, and live insects constituted 40.9%. Insect farms with an annual income accounted for 77.3%, of which 65.4% had annual sales of less than 20 million won. Market acquisition was rated by most insect industry workers (84.0%) as the primary challenge. In conclusion, although the number of people employed in the insect industry is increasing annually, the number of young insect farmers (20s to 40s) is decreasing. The production of industrial insects was limited to a few species, and more than half of insect farms have very low incomes. Furthermore, insect farms have the greatest difficulty in market acquisition, necessitating the development of utilization technology to promote the consumption of industrial insects.

• Journal of Food Hygiene and Safety
• /
• v.37 no.4
• /
• pp.216-224
• /
• 2022

This study was aimed at validating the analysis methods for deacetylasperulosidic acid (DAA), total sugar, galacturonic acid, glucose, and galactose, which are the indicator components of fermented Morinda citrifolia polysaccharide extract (Vitalbos). We modified the previously reported methods for validating the analytical methods. The specificity, linearity, precision, accuracy, limit of detection (LOD), and limit of quantification (LOQ) were measured using phenol-sulfuric acid method and high-performance liquid chromatography (HPLC). The retention time and spectrum of the standard solution of Vitalbos coincided, confirming the specificity. The calibration curve correlation coefficient (R²), of five indicator components, ranged from 0.9995-0.9998, indicating excellent linearity of 0.99 or more. The intra-day and inter-day precision range of the assay was 0.14-3.01%, indicating a precision of less than 5%. The recovery rate was in the range of 95.13-105.59%, presenting excellent accuracy. The LOD ranged from 0.39 to 0.84 ㎍/mL and the LOQ ranged from 1.18 to 2.55 ㎍/mL. Therefore, the analytical method was validated for DAA, total sugar, galacturonic acid, glucose, and galactose, in Vitalbos. The indicator component content in Vitalbos was determined using a validated method. The contents of DAA, total sugar, galacturonic acid, glucose, and galactose were 2.31±0.06, 475.92±5.95, 72.83±1.05, 71.63±2.44, and 67.30±2.31 mg/g of dry weight, respectively. These results suggest that the developed analytical method is efficient and could contribute to the quality control of Vitalbos, as a healthy functional food material.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.1
• /
• pp.27-33
• /
• 2023

Several domestically consumed sweetpotato derivatives, such as sweetpotato starch for processing raw materials, frozen and refrigerated paste, and powder are dependent on imports. This study was conducted to examine the suitability of sweetpotato cultivars of twelve varieties (powdery-type and viscous type) cultivated in paddy fields, for use in starch, chips, dried products, and beverages. The two-year average yield results of the four cultivars suitable for starch (in order of highest to lowest yield) was as follows: Gogeonmi (4,018 kg/10a); Daeyumi (3,615 kg/10a); Jinhongmi (3,426 kg/10a); Singeonmi (2,837 kg/10a). The starch content was 20.2%, 18.2%, 21.2%, and 20.6% in Daeyumi, Gogeonmi, Singeonmi, and Jinghongmi, respectively. The total amount of starch was higher in Daeyumi (730 kg/10a) and Gogeonmi (731 kg/10a) than that in Singeonmi and Jinghongmi. The yield of Pungwonmi and Shinjami were 4,443 and 3,602 kg/10a, respectively. Powdery-type sweetpotatoes (Daeyumi and Gogeonmi) showed the low decay rates of all cultivars (0.8 and 0%, respectively). The yield of the storage root formation and storage root swelling stages by water-logging treatment decreased by 16.5% and 15.4% for Pungwonmi, and by 17.2% and 10.0% for Shinjami. Drainage management of paddy fields is necessary to reduce the damage caused by water-logging. Our results suggest that cultivation of sweetpotato varieties suitable for processing raw materials in paddy fields will enable stable yields of sweetpotato with a high starch content.

• Conservation Science in Museum
• /
• v.29
• /
• pp.1-32
• /
• 2023

The Paintings of a 60^th Wedding Anniversary Ceremony Created by an Unknown Painter (Deoksu 6375), housed by the National Museum of Korea, is a five-panel painting book depicting scenes from a wedding ceremony. Hoehonrye is a type of repeated wedding ceremony to commemorate a couple's 60th wedding anniversary with congratulations from the community. The paintings of the book record five scenes from the wedding: jeoninrye, a ceremony where the groom brings a wooden wild goose to the bride's house; gyoberye, the groom and the bride bowing to each other; heosurye, pouring liquor to toast to the couple's longevity; jeopbin, offering tea to guests; and a banquet to celebrates the couple's 60th wedding anniversary. The book describes figures, buildings and a variety of items in detail with delicate brushstrokes. The techniques were examined using microscopy, infrared, and X-ray irradiation and hyperspectral imaging analysis. The invisible parts were examined to identify the rough sketch and distinguish pigments and dyes used for each color. The components of the pigments were determined by X-ray fluorescence analysis, while the dyes were identified by UV-vis spectrometry. Microscope observation revealed that the fabric used for the paintings was raw silk thread with almost no fiber twist, and plain silk fabric. Hyperspectral imaging analysis, X-ray fluorescence analysis, and UV-vis spectrometry confirmed that the white pigment was white lead and the black was chinese ink. The red pigments were using red clay, cinnabar, and a mixture of cinnabar and minium. Brown was made using red clay and organic dyes, and yellow using gamboge. Green was identified as indigo, malachite, chrome green, barium sulfide, and blue as azurite, smalt, and indigo. The purple dye was estimated as a mixture of indigo and cochineal, and gold parts were used gold powder. Hyperspectral images were distinguished parts damaged and conservation treatment area.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.50-59
• /
• 2023

The amount of dust generated during the dissolution of scrap in an electric arc furnace is approximately 1.5% of the scrap metal input, and it is primarily collected in a bag filter. Electric arc furnace dust primarily consists of zinc and ion. The processing of zinc starts with its conversion into pellet form by the addition of a carbon-based reducing agent(coke, anthracite) and limestone (C/S control). These pellets then undergo reduction, volatilization, and re-oxidation in rotary kiln or RHF reactor to recover crude zinc oxide (60%w/w). Next, iron is discharged from the electric arc furnace dust as a solid called Fe clinker (secondary by-product of the Fe-base). Several methods are then used to treat the Fe clinker, which vary depending on the country, including landfilling and recycling (e.g., subbase course material, aggregate for concrete, Fe-source for cement manufacturing). However, landfilling has several drawbacks, including environmental pollution due to leaching, high landfill costs, and wastage of iron resources. To improve Fe recovery in the clinker, we pulverized it into optimal -sized particles and employed specific gravity and magnetic force selection methods to isolate this metal. A carbon-based reducing agent and a binding material were added to the separated coarse powder (>10㎛) to prepare briquette clinker. A small amount (1-3%w/w) of the briquette clinker was charged with the scrap in an electric arc furnace to evaluate its feasibility as an additives (carbonaceous material, heat-generating material, and Fe source).

• Clean Technology
• /
• v.29 no.2
• /
• pp.126-134
• /
• 2023

Direct catalytic decomposition is a promising method for controlling the emission of nitrous oxide (N₂O) from the semiconductor and display industries. In this study, a γ-Al₂O₃ catalyst was developed to reduce N₂O emissions by a catalytic decomposition reaction. The γ-Al₂O₃ catalyst was prepared by an extrusion method using boehmite powder, and a N₂O decomposition test was performed using a catalyst reactor that was approximately 25.4 mm (1 in) in diameter packed with approximately 5 mm of catalysts. The N₂O decomposition tests were carried out with approximately 1% N₂O at 550 to 750 ℃, an ambient pressure, and a GHSV=1800-2000 h^-1. To confirm the N₂O decomposition properties and the effect of O₂ and steam on the N₂O decomposition, nitrogen, air, and air and steam were used as atmospheric gases. The catalytic decomposition tests showed that the 1% N₂O had almost completely disappeared at 700 ℃ in an N₂ atmosphere. However, air and steam decreased the conversion rate drastically. The long term stability test carried out under an N₂ atmosphere at 700 ℃ for 350 h showed that the N₂O conversion rate remained very stable, confirming no catalytic activity changes. From the results of the N₂O decomposition tests and long-term stability test, it is expected that the prepared γ-Al₂O₃ catalyst can be used to reduce N₂O emissions from several industries including the semiconductor, display, and nitric acid manufacturing industry.

• Journal of the Korean Society of Food Culture
• /
• v.21 no.3
• /
• pp.297-302
• /
• 2006

This study has examined the physicochemical properties of the Pleurotus eryngii, including their proximate components, amount mineral content, total dietary fiber, total sugar, reducing sugar and free sugar. Additionally, it measured the P. egii ethanol extracts and the total amounts of polyphenol compounds as well as its electron donating ability (EDA) of the substance fraction (SF). The P. eryngii powder's moisture content was 9.0% and each of the other element content such as carbohydrate, crude protein, crude ash and crude fat was found to be 63.06%, 20.70%, 5.20% and 2.0% respectively. Potassium (K) was shown to be the greatest inorganic content and manganese (Mn) was the lowest. Furthermore fructose, galactose, glucose lactose and maltose free sugar content was found in this order. 387 mg% of the total amounts of polyphenol was found in the P. eryngii whole body ethanol extract, 158 mg% in the stipe extract, 593 mg% in the pileus extract and 607 mg% in the substance fraction (SF). Electron donating ability (EDA) was highest at 91.12% in the whole body extract and lowest at 62.90% in the stipe extract. Additionally, the EDA for substance fraction (SF) 0.02%-0.1% was found to be 57.78-77.33%, which was lower than the 0.02%-tocopherol (93.92%) and BHT (96.72%). From these results, it can be assumed that P. eryngii offers superior antioxidative effects with its high content of fiber, inorganic materials and total amounts of polyphenol as well as high electron donating ability (EDA), thereby making it ideal for use in functional foods and industrial materials.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.715-728
• /
• 2023

Tracksite of pterosaurs, birds, and dinosaurs in Chungmugong-dong in Jinju was designated as a natural monument in 2011 and is known as the world's largest in terms of the number and density of pterosaur footprints. This site has been managed by installing protection buildings to conserve in 2018. About 17% of the footprints of pterosaur, theropod, and ornithopod in this site under management in the 2nd protection building are of great academic value, but observation of footprints has difficulties due to continuous physical and chemical damage. In particular, the accumulation of milk-white contaminants is formed by the gypsum and air pollutant complex. Gypsum remains evaporated with a plate or columnar shape in the process of water circulation around the 2nd protection building, and the dust is from through the inflow of the gallery windows. The aqueous solution of gypsum, consisting of calcium from the lower bed and sulfur from grass growth, is catchmented into the groundwater from the area behind the protection building. Pollen and a few minerals other constituents of contaminants, go through the gallery window, which makes it difficult to expel dust. To conserve the fossil-bearing beds from two contaminants of different origins, controlling the water and atmospheric circulation of the 2nd protection building and removing the contaminants continuously is necessary. When cleaning contaminants, the steam cleaning method is sufficiently effective for powder-shaped milk-white contaminants. The fossil-bearing bed consists of dark gray shale with high laser absorption power; the laser cleaning method accompanies physical loss to fossils and sedimentary structures; therefore, avoiding it as much as possible is desirable.

• Journal of Marine Life Science
• /
• v.8 no.2
• /
• pp.166-177
• /
• 2023

The giant freshwater prawn (Macrobrachium rosenbergii) suffers economic losses in aquaculture facilities due to problems such as poor body color and carapace weakness. While this species is farmed on an animal-based diet, in the wild it consumes a detritus diet with a high proportion of plant matter. The plant matter they consume in the wild is not only a source of basic nutrients, but also carotenoids, which are responsible for body color. Korean goldenbell (Forsythia koreana) is a flowering tree widely distributed in Korea, and its leaves contain carotenoids comparable to yellow carrots. In this study, we investigated the effects of feeding Forsythia leaves to M. rosenbergii on their body color and health. The experimental diets were 100% commercial feed (control), CON, 80% commercial feed plus 20% Forsythia leaf powder, FP, and 80% commercial feed plus 20% unprocessed Forsythia leaves, FL, and each diet was fed to juvenile prawn with an average weight of 1.1 ± 0.2 g for 10 weeks. In terms of body color, the CON prawn were consistently clear ivory in color, while the FP and FL prawn changed from blue to dark brown as the days of rearing progressed. Survival and growth were not significantly different between CON and FP or FL. Histological comparison of the hepatopancreas revealed that the vacuole size of B cells, the constituent cells of the hepatopancreatic tubule, was significantly larger in FP and FL compared to CON. The vacuoles of B cells are responsible for the absorption and digestion of nutrients, suggesting that the supply of Forsythia leaves may have had a positive effect on the health of the M. rosenbergii. The above results show that the use of Forsythia leaves in the aquaculture of M. rosenbergii can be expected to improve body color and health without inhibiting growth.