• Journal of Applied Biological Chemistry
• /
• v.57 no.3
• /
• pp.219-225
• /
• 2014

Azadirachta indica extract (AIE) has been regarded as a promising source of environment-friendly organic materials owing to their low mammalian toxicity. However, quite a bit of research has been reported that AIE may cause clastogens in human lymphocytes. Therefore, this study was conducted to evaluate the antimutagenic and genotoxicity of two samples of AIE. Antimutagenic test was experimented by using bacterial reverse mutation test. In the bacterial reverse mutation test, five strains Salmonella Typhimurim of two samples of AIE in order to evaluate its mutagenic potential. Bacterial reverse mutation test was also performed on positive control and negative control groups in the presence of the metabolic activation system (S-9 mix) and metabolic non-activation system. In the chromosome aberration test, Chinese hamster lung cells were exposed to AIE for 6 or 24 h with BPS, or for 6 h with S-9 mix. Negative and positive control groups were experimented for chromosome aberration test. As a result, the number of mutated colonies induced by 4-NQO were reduced by AIE treatment in all strains, indicating that AIE may have antimutagenic effects. Bacterial reverse mutation and chromosomal aberration were not shown at all concentration of AIE, regardless of activation of the metabolic system. we concluded that two AIE samples used in this study have no genotoxic effects to human, according to the genotoxicity battery system suggested by ICH (International Conference on Harmonization).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.7
• /
• pp.1038-1048
• /
• 2010

The purpose of this study was to investigate some heavy metals (Pb, Cd, Cr, Cu, Hg) in 52 commercial herbal pills used as general processed food, to identify weekly heavy metal intakes from herbal pills and to evaluate their potential health risks. The samples were digested with a microwave and determinations of heavy metal residues were carried out by inductively coupled plasma mass spectrometry (ICP-MS) and mercury analyzer. The mean values of heavy metal contents for herbal pills used as general processed food were Pb 0.421 (0.032~1.630), Cd 0.157 (0.011~0.515), Cr 1.033 (0.112~9.933), Cu 6.923 (1.333~16.755), Hg 0.010 (0.001~0.088) mg/kg. Lead contents of herba and cadmium of algae, herba were high (ANOVA-test, p<0.05). Levels of cadmium concentrations exceeding WHO reference values (0.3 mg/kg) were observed in 10 samples (4 species). The significant correlation was observed between Pb and Cd (r=0.633, p<0.01). The weekly intakes of Pb, Cd, Cr, Cu, Hg from herbal pills were 1.112 (0.072~5.088), 1.614 (0.029~9.257), 3.000 (0.252~23.690), 0.182 (0.008~1.235), 0.220 (0.000~0.420)%, respectively, as compared with the Provisional Tolerable Weekly Intake (PTWI) established by Joint FAO/WHO Expert Committee for food safety evaluation. Our data suggest regulations limiting heavy metals in herbal pills used as general processed food.

• Food Science and Preservation
• /
• v.16 no.6
• /
• pp.900-907
• /
• 2009

Chiffon cakes were prepared using various concentrations of aloe gel to develop functional baking procedures. The quality characteristics of chiffon cakes prepared after addition of 20%, 40%, or 60% (w/w) aloe gel, substituting for the same levels of wheat flour, were investigated. No significant weight difference between cakes was observed. The height of cakes containing aloe gel was significantly greater than that of control cakes. The baking loss rate (BLR) of aloe gel decreased as the amount of gel increased, and cakes prepared using 60% (w/w) aloe gel had the lowest BLR. Moisture contents of cakes prepared using aloe gel were higher than that of control cakes. Cakes with 60% (w/w) aloe gel had the highest moisture content. The pore size of cakes with 60% (w/w) aloe gel was the smallest of all groups. Crumb color became whiter as the proportion of aloe gel increased. Lightness (L value) of control cake was lower than that of cake containing aloe gel. Redness (a value) of aloe chiffon cakes increased as the proportion of aloe gel rose. Yellowness (b value) of cakes with 40% (w/w) aloe gel was significantly higher than that of the control group. Other cakes showed no difference in b value compared with control cake. Hardness in all cakes prepared with aloe gel was significantly lower than that of the control group. Adhesiveness of control cake was significantly lower than that of other cakes. No significant between-group difference in springiness was observed. The cohesiveness of cakes with 40% (w/w) aloe gel was significantly lower than that of the control group and that of cakes with 20% (w/w) aloe gel. The gumminess and chewiness of control cakes were significantly higher than those of other cakes. The yellowness of cake with 60% (w/w) aloe gel was significantly lower than that of the other groups. Pore size decreased after the addition of aloe gel. There was no significant difference in appearance among cakes thus, all cakes were acceptable to potential consumers. Although no perceptible difference in aloe odor was evident, cakes with 60% (w/w) aloe gel scored significantly lower in flavor acceptance compared with other cakes. No significant between-cake difference in taste acceptance, perceived moisture level, or texture acceptability was observed. Cakes with 40% and 60% (both w/w) aloe gel were of significantly higher density than other cakes. Overall, the acceptability of cakes with 60% (w/w) aloe gel was lower than that of other cakes. Ultimately, the results indicated that quality can be enhanced by adding less than 40% (w/w) aloe gel to chiffon cakes as a substitute for wheat flour.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.2
• /
• pp.119-128
• /
• 2013

Since the early 2000s, demand for coastal dredging projects have been significantly increased, and the dredged sediments have showed the continuing marked increases through the multiple projects with other coastal development and constructions. As significant or potential degradation of marine environment has been mounting, we checked the current situation of marine environmental impact assessment through marine water and sediment qualities in relation with dredging projects of the sea area utilization consultation statements submitted in 2011. While analysis percentages of the general items were usually higher, harmful components such as metals revealed wide variation of analysis percentages. In the event of analysis of metals, the pre-treatment process (full digestion) and analysis method were not properly implemented in accordance with the guidelines for preparation of consultation statements. Although not specified in the guidelines, verification procedures (tests of recovery efficiency and detection limit) to secure the reliability were almost ignored. As a result, most of developers did conduct poor marine environmental impact assessment on coastal dredging and related projects. We suggested that the responsible government authority should establish new detailed guidelines on the sea area utilization consultation for more strict evaluation and diagnosis of marine environment and distinctly request the developer to obey the guidelines by complementing the system of the sea area utilization consultation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.154-155
• /
• 2012

The promise of nano-crystalites (nc) as a technological material, for applications including display backplane, and solar cells, may ultimately depend on tailoring their behavior through doping and crystallinity. Impurities can strongly modify electronic and optical properties of bulk and nc semiconductors. Highly doped dopant also effect structural properties (both grain size, crystal fraction) of nc-Si thin film. As discussed in several literatures, P atoms or radicals have the tendency to reside on the surface of nc. The P-radical segregation on the nano-grain surfaces that called self-purification may reduce the possibility of new nucleation because of the five-coordination of P. In addition, the P doping levels of ${\sim}2{\times}10^{21}\;at/cm^3$ is the solubility limitation of P in Si; the solubility of nc thin film should be smaller. Therefore, the non-activated P tends to segregate on the grain boundaries and the surface of nc. These mechanisms could prevent new nucleation on the existing grain surface. Therefore, most researches shown that highly doped nc-thin film by using conventional PECVD deposition system tended to have low crystallinity, where the formation energy of nucleation should be higher than the nc surface in the intrinsic materials. If the deposition technology that can make highly doped and simultaneously highly crystallized nc at low temperature, it can lead processes of next generation flexible devices. Recently, we are developing a novel CVD technology with a neutral particle beam (NPB) source, named as neutral beam assisted CVD (NBaCVD), which controls the energy of incident neutral particles in the range of 1~300eV in order to enhance the atomic activation and crystalline of thin films at low temperatures. During the formation of the nc-/pm-Si thin films by the NBaCVD with various process conditions, NPB energy directly controlled by the reflector bias and effectively increased crystal fraction (~80%) by uniformly distributed nc grains with 3~10 nm size. In the case of phosphorous doped Si thin films, the doping efficiency also increased as increasing the reflector bias (i.e. increasing NPB energy). At 330V of reflector bias, activation energy of the doped nc-Si thin film reduced as low as 0.001 eV. This means dopants are fully occupied as substitutional site, even though the Si thin film has nano-sized grain structure. And activated dopant concentration is recorded as high as up to 1020 #/$cm^3$ at very low process temperature (＜ $80^{\circ}C$) process without any post annealing. Theoretical solubility for the higher dopant concentration in Si thin film for order of 1020 #/$cm^3$ can be done only high temperature process or post annealing over $650^{\circ}C$. In general, as decreasing the grain size, the dopant binding energy increases as ratio of 1 of diameter of grain and the dopant hardly be activated. The highly doped nc-Si thin film by low-temperature NBaCVD process had smaller average grain size under 10 nm (measured by GIWAXS, GISAXS and TEM analysis), but achieved very higher activation of phosphorous dopant; NB energy sufficiently transports its energy to doping and crystallization even though without supplying additional thermal energy. TEM image shows that incubation layer does not formed between nc-Si film and SiO2 under later and highly crystallized nc-Si film is constructed with uniformly distributed nano-grains in polymorphous tissues. The nucleation should be start at the first layer on the SiO2 later, but it hardly growth to be cone-shaped micro-size grains. The nc-grain evenly embedded pm-Si thin film can be formatted by competition of the nucleation and the crystal growing, which depend on the NPB energies. In the evaluation of the light soaking degradation of photoconductivity, while conventional intrinsic and n-type doped a-Si thin films appeared typical degradation of photoconductivity, all of the nc-Si thin films processed by the NBaCVD show only a few % of degradation of it. From FTIR and RAMAN spectra, the energetic hydrogen NB atoms passivate nano-grain boundaries during the NBaCVD process because of the high diffusivity and chemical potential of hydrogen atoms.

• Korean Journal of Environmental Biology
• /
• v.35 no.2
• /
• pp.116-122
• /
• 2017

Basic dyes such as malachite green and methylene blue have been used as disinfectants to control water fungal infections since the 1930s. However, after succeeding reports of carcinogenicity and bioaccumulation of the dye, their use was forbidden in lieu of public health. This study undertook to evaluate the therapeutic effect of sulfur solution processed by effective microorganisms (EM-PSS) against Saprolegnia parasitica infection, and its safety in fish. In vitro antifungal evaluation of EM-PSS inhibited the growth of S. parasitica mycelia at concentrations of 50 ppm or higher. The acute toxicity test of EM-PSS to the mud fish (Misgurnus mizolepis) measured a no effect concentration (NOEC) at 100 ppm, the lowest effect concentration (LOEC) at 125 ppm, and the half-lethal concentration ($LC_{50}$) at 125 ppm in juvenile and 250 ppm in the immature stage. In addition, the ecotoxicity test of EM-PSS using Daphnia magna inhibited swimming of D. magna at concentrations of 100 ppm or less. Lastly, the EM-PSS prevented infection of S. parasitica to mud fish, at concentrations of 50 ppm. Furthermore, at 100 ppm concentration, the EM-PSS showed no acute toxicity on mud fish, nor any eco-toxic effects on D. magnano. Therefore, we conclude that carcinogenic disinfectants such as malachite green and methylene blue could be replaced by EM-PSS to remove S. parasitica in mud fish farming, and might be a potential eco-friendly disinfectant in aquaculture.

• Economic and Environmental Geology
• /
• v.49 no.6
• /
• pp.469-477
• /
• 2016

To evaluate the $CO_2$ storage capacity for the reservoir rock, the laboratory scale technique to measure the amount of $scCO_2$, replacing pore water of the reservior rock after the $CO_2$ injection was developed in this study. Laboratory experiments were performed to measure the $scCO_2$ displacement efficiency of the conglomerate and the sandstone in Janggi basin, which are classified as available $CO_2$ storage rocks in Korea. The high pressurized stainless steel cell containing two different walls was designed and undisturbed rock cores acquired from the deep drilling site around Janggi basin were used for the experiments. From the lab experiments, the average $scCO_2$ displacement efficiency of the conglomerate and the sandstone in Janggi basin was measured at 31.2% and 14.4%, respectively, which can be used to evaluate the feasibility of the Janggi basin as a $scCO_2$ storage site in Korea. Assuming that the effective radius of the $CO_2$ storage formations is 250 m and the average thickness of the conglomerate and the sandstone formation under 800 m in depth is 50 m each (from data of the drilling profile and the geophysical survey), the $scCO_2$ storage capacity of the reservoir rocks around the probable $scCO_2$ injection site in Janggi basin was calculated at 264,592 metric ton, demonstrating that the conglomerate and the sandstone formations in Janggi basin have a great potential for use as a pilot scale test site for the $CO_2$ storage in Korea.

• The korean journal of orthodontics
• /
• v.29 no.2 s.73
• /
• pp.183-195
• /
• 1999

Growth and development evaluation of patients with growth potential is of great importance for orthodontic treatment planning. Timing of orthodontic intervention greatly depends on one's developmental status, thus if there is a difference in skeletal maturation among malocclusion types different treatment timing should be applied. The objective of this study was to evaluate and compare skeletal maturation among different malocclusion types. The samples used in this study was 38 Class I, 36 Class II and 33 ClassIII females aging from 8 to 10 years. Handwrist X-rays were taken with 6 month interval till 12-13 years of age. The results were as follows. 1. There was no skeletal maturity difference among different malocclusion types. 2. The hamular process of hamate was observed at $9.16{\pm}0.72$ years, pisiform bone at $9.13{\pm}0.71$ years and the ulnar sesamoid at $10.34{\pm}0.84$ years. 3. The timing of epiphyseal capping on the third finger was $10.96{\pm}0.80$ years for distal phalanx and $11.27{\pm}0.87$ years for middle phalanx, $11.12{\pm}0.85$ years for proximal phalanx of the first finger, $11.21{\pm}0.82$ years for radius and $11.62{\pm}0.85$ years for middle phalanx of the fifth finger. 4. The appearance of pisiform bone showed high correlation with appearance of hamular process of hamate(r=0.91) and ulnar sesamoid bone appearance showed high correlation with advanced ossification of hamular process(r=0.86). Timing of epiphyseal capping among different parts showed high correlation(r=0.80-0.90). 5. The shape of middle phalanx of the fifth finger showed the highest variability ($20.6\%$).

• Toxicological Research
• /
• v.4 no.1
• /
• pp.55-84
• /
• 1988

This study was carried out to investigate the teratological potential of azinphos-methyl in the rat fetuses and to establish the nature of the effects on organogenesis and intrauterine development. The Sprague-Dawley female rats (180-210g) without previous litter were used in this study. Azinphos-methyl dosages of 0.094mg/kg, 0.4mg/kg, 1.5mg/kg were selected based on the acute intragastric $LD_{50}$ of 15mg/kg in the rat. Azinphos-methyl in water (Treatment Group), non-treatment control (Negative Control), water control (Sham Control), were administered by oral route and aqueous solution of acetyl salicylic acid (Positive Control) was administered by gavage at rate of 10 ml/kg of body weight from day 6 through 15. The results obtained were summarized as follows. 1. Decreased body weight of dams was observed in animals treated with aspirin and azinphos-methyl 1.5 mg/kg from day 7 through 14. (P<0.01) 2. There was an apparent decrement in the absolute liver weight in the azinphos-methyl 1.5 mg/kg treated group (P<0.05). However, the absolute and relative kidney weight in aspirin group (P<0.05, P<0.01) and the absolute and relative ovary weight in aspirin, azinphos-methyl treatment groups (P<0.01, P<0.05) were increased. 3. Decreased protein contents of dam's liver was observed in the aspirin and high dose azinphos-methyl treated group of animals (P<0.01). 4. The number of male-female ratio per dam increased in azinphos-methyl 1.5 mg/kg group but there was an apparent decrement in the body weight of fetuses in aspirin and high dose azinphos-methyl group (P<0.01, P<0.05). Total immature and resorbed fetuses were increased in aspirin group and the number of dead fetuses were also increased in azinphos-methyl 1.5mg/kg treated group of animals. (P<0.01, P<0.05). 5. In soft tissue defects, diaphragmatic hernia in diaphragm, anophthalmia, enlarged olfactory bulb, hydrocephalus, absence of third and lateral ventricle in skull, hydronephrosis in kidney, atrophy of left ventricle wall, enlarged apex in heart were observed. Especially, defects of diaphragm, heart and eye ball showed peak incidences in the high dose azinphosmethyl and aspirin group. (P<0.01). 6. Variations in the ossification patterns of skull, sternebrae, tail, forelimbs and hindlimbs showed peak incidences in the aspirin and high dose azinphos-methyl group. (P<0.01). 7. In the developmental indices of offspring, the mortality of aspirin and azinphos-methyl 1.5mg/kg treated group was higher than that of negative control. And, there was an apparent decrement in the body weight of fetuses (P<0.01) and considerable differences were obtained in pivoting, development of fur, auditory function, vision, quadrupled muscle development and testes descent in aspirin and azinphos-methyl 1.5mg/kg group. (P<0.01).

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.3
• /
• pp.317-324
• /
• 2007

Fluorescence measurements of dissolved organic matter(DOM) have the superior advantages over other analysis tools for applying to water quality management. A preliminary study was conducted to test the feasibility of applying synchronous fluorescence measurements for tracing and monitoring pollution sources in a small stream located in an upstream area of the Sooyoung watershed in Busan. The water quality of the small stream is affected by leachate from sawdust pile and discharge of untreated sewage. The sampling sites included an upstream site, two pipes discharging untreated sewage, leachate from sawdust, and a downstream site. Of the five field samples, the leachate was distinguished from the other samples by a high peak at a lower wavelength range and a blunt peak at 350nm, suggesting that synchronous fluorescence can be used as a discrimination tool for monitoring the pollution. The efficacy of various indices derived from the spectral features to discriminate the pollution source was tested for well-defined mixture of the sawdust leachate and the upstream stream by comparing (1)the difference between measured values and those predicted based on mass balance and the characteristics of the two samples and (2)the linear correlations between index values and mass ratios of the sample mixtures. Of various discrimination indices selected, fluorescence intensities at 276 nm$({\Delta}\lambda=30nm)$and 347 nm$({\Delta}\lambda=60nm)$ were suggested as promising potential discrimination indices for the sawdust pollution source. Despite the limited number of samples and the study area, this study illustrates the evaluation process that should be followed to develop rapid, low-cost discrimination indices to monitor pollution sources based on end member mixing analyses.