• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4431-4440
• /
• 2022

An advanced nuclear reactor based on molten salts including a molten salt reactor and pyroprocessing needs a sensitive monitoring system suitable for operation in harsh environments with limited access. Multi-element detection is challenging with the conventional technologies that are compatible with the in-situ operation; hence laser-induced breakdown spectroscopy (LIBS) has been investigated as a potential alternative. However, limited precision is a chronic problem with LIBS. We increased the precision of LIBS under high temperature by protecting optics using a gas protective layer and correcting for shotto-shot variance and lens-to-sample distance using a laser-induced acoustic signal. This study investigates cerium as a surrogate for uranium and corrosion products for simulating corrosive environments in LiCl-KCl. While the un-corrected limit of detection (LOD) range is 425-513 ppm, the acoustic-corrected LOD range is 360-397 ppm. The typical cerium concentrations in pyroprocessing are about two orders of magnitude higher than the LOD found in this study. A LIBS monitoring system that adopts these methods could have a significant impact on the ability to monitor and provide early detection of the transient behavior of salt composition in advanced molten salt-based nuclear reactors.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.8
• /
• pp.117-127
• /
• 2007

Slope stability analysis is a geotechnical engineering problem characterized by many sources of uncertainty. Some of them are connected to the uncertainties of soil properties involved in the analysis. In this paper, a numerical procedure for integrating commercial finite difference method into probabilistic analysis of slope stability is presented. Since the limit-state function cannot be expressed in an explicit form, the ANN-based response surface method is adopted to approximate the limit-state function and the first-, second-order reliability method and the Monte Carlo simulation technique are used to calculate the probability of failure. Probabilistic stability assessments for a hypothetical two-layer slope and the Sugar Creek embankment were performed to verify the application potential to the slope stability problems. The examples show the successful implementation and the possibility of the extension of the proposed procedure to the variety of geotechnical engineering problems.

• Korean Educational Research Journal
• /
• v.43 no.1
• /
• pp.183-213
• /
• 2022

The purpose of this study is to examine the implications of Deleuze and Guattari's Machinism and Pedagogy of Assemblages. A slow, empirical process offered by Deleuze and Guattari is possible only if they experience a repetition of the duration in time. The identity of this world, a combination of potential and reality, is expressed as a machine. The identity of the 'machine' is the generation. The identity of the information society that exists everywhere in the cloud and unconsciously collects big data is also the information society. The information society is at risk of leaning toward a society in which individual desires are managed prior to the manifestation of a self-reliance a machine consisting of unmarked and mechanical arrangements. Social science based on the theory of layout shares the characteristics of repetition patterns, coexistence of linguistic and materiality, attention to boundary and negation to total whole. The pedagogy of layout, in which the collective pattern is structurally deformed in time, conforms to the original problem consciousness of Deleuze and Guattari, slow and empirical education. In addition, the work of examining the materiality and expression of the education-machine will contribute to the establishment of a new learning theory, an educational theory in the era of trans-human.

• Korea Trade Review
• /
• v.42 no.3
• /
• pp.75-99
• /
• 2017

Quantitatively, there are no problem regarding new doctoral degree holders in the field of international trade, but the quality of the degrees does not meet the level of academic potential expected by recruiters. The purpose of this study is to identify current problems of doctoral education to cultivate future generations of scholars in international trade, and to suggest some alternatives to improve doctoral programs through surveys and focused group Results of this studies show that the major issues are a lack of full-time applicants and a demand for doctoral degree holders, and poor coursework. For doctoral education programs to successfully cultivate next generation academicians in the field of international trade, it is imperative for graduate schools to recruit distinguished full-time students. For this purpose, graduate schools must offer sufficient financial support packages as well as provide their students with good coursework and rigorous procedures on defending their dissertation. In addition, some graduate schools that mainly admit part-time students need to focus more on the quality of their doctoral degrees. Finally, preferential treatment of recruitment procedures might be helpful in expanding employment opportunities for new doctoral degree holders in international trade.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.4
• /
• pp.361-371
• /
• 2009

Resistivity tomography is very effective geophysical method to find out the resistivity distribution and its change in time around a tunnel. Thus, the resistivity tomogram can provide helpful information which is necessary for the effective maintenance of the tunnel. However, an air filled tunnel severely distorts tomography data, especially when the current or potential electrode is placed near the tunnel. Moreover, the distortion can often lead to misinterpretation of tomography monitoring data. To solve these problem, we developed a resistivity modeling and time-lapse inversion program which include a tunnel. In this study, using the developed program we assured that the inversion including a tunnel gives much more accurate image around a tunnel, compared with the conventional tomogram where the tunnel is not included. We also confirmed that the time-lapse inversion of resistivity monitoring data defines well resistivity changed areas around a tunnel in time.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.1
• /
• pp.23-31
• /
• 2023

Research and interest in sustainable printing are increasing in the packaging printing industry. Currently, predicting the amount of ink required for each work is based on the experience and intuition of field workers. Suppose the amount of ink produced is more than necessary. In this case, the rest of the ink cannot be reused and is discarded, adversely affecting the company's productivity and environment. Nowadays, machine learning models can be used to figure out this problem. This study compares the ink usage prediction machine learning models. A simple linear regression model, Multiple Regression Analysis, cannot reflect the nonlinear relationship between the variables required for packaging printing, so there is a limit to accurately predicting the amount of ink needed. This study has established various prediction models which are based on CART (Classification and Regression Tree), such as Decision Tree, Random Forest, Gradient Boosting Machine, and XGBoost. The accuracy of the models is determined by the K-fold cross-validation. Error metrics such as root mean squared error, mean absolute error, and R-squared are employed to evaluate estimation models' correctness. Among these models, XGBoost model has the highest prediction accuracy and can reduce 2134 (g) of wasted ink for each work. Thus, this study motivates machine learning's potential to help advance productivity and protect the environment.

• Steel and Composite Structures
• /
• v.45 no.2
• /
• pp.175-191
• /
• 2022

A review of previous studies shows that although there is a considerable difference between buckling loads of structures under follower and non-follower lateral loads, only the buckling load of FGM elliptical cylindrical shell under non-follower lateral load was investigated in the literature. This study is the first to obtain the buckling load of elliptical FGM cylindrical shells under follower lateral load and also make a comparison between buckling loads of elliptical FGM cylindrical shells under follower and non-follower lateral loads. Moreover, this research is the first one to derive the load potential function of elliptical cylindrical shell. In this regard, the FGM cylindrical elliptical shell was modeled using the semi-analytical finite strip method and based on the First Shear Deformation Theory (FSDT). The shell is discretized by strip elements aligned in the longitudinal direction. The Lagrangian and harmonic shape functions were considered in the circumference and longitudinal directions, respectively. The buckling pressure of the shell under follower and non-follower lateral loads was obtained from eigenvalue problem. The results obtained from the model were compared with those presented in the literature to evaluate the validity of the model. A comparison index was defined to compare the buckling loads of the shell under follower and non-follower lateral load. A parametric study was carried out to investigate the effects of material properties and shell geometry characteristics on the comparison index. For the elliptical cylindrical shells with length-to-radius ratio greater than 16 and major-to-minor axis ratio greater than 0.6, the comparison index reaches to more than 20 percent which is significant. Moreover, the maximum difference is about 30 percent in some cases. The results obtained from the parametric study indicate that the buckling load of long elliptical cylindrical shell under non-follower load is not reliable.

• Geomechanics and Engineering
• /
• v.31 no.3
• /
• pp.237-248
• /
• 2022

Nowadays, more and more subway tunnels were planed and constructed underneath the ground of urban cities to relieve the congested traffic. Potential damage may occur in existing tunnel if the new tunnel is constructed too close. So far, previous studies mainly focused on the tunnel-tunnel interactions with circular shape. The difference between circular and horseshoe shaped tunnel in terms of deformation mechanism is not fully investigated. In this study, three-dimensional numerical parametric studies were carried out to explore the effect of different tunnel shapes on the complicated tunnel-tunnel interaction problem. Parameters considered include volume loss, tunnel stiffness and relative density. It is found that the value of volume loss play the most important role in the multi-tunnel interactions. For a typical condition in this study, the maximum invert settlement and gradient along longitudinal direction of horseshoe shaped tunnel was 50% and 96% larger than those in circular case, respectively. This is because of the larger vertical soil displacement underneath existing tunnel. Due to the discontinuous hoop axial stress in horseshoe shaped tunnel, significant shear stress was mobilized around the axillary angles. This resulted in substantial bending moment at the bottom plate and side walls of horseshoe shaped tunnel. Consequently, vertical elongation and horizontal compression in circular existing tunnel were 45% and 33% smaller than those in horseshoe case (at monitored section X/D = 0), which in latter case was mainly attributed to the bending induced deflection. The radial deformation stiffness of circular tunnel is more sensitive to the Young's modulus compared with horseshoe shaped tunnel. This is because of that circular tunnel resisted the radial deformation mainly by its hoop axial stress while horseshoe shaped tunnel do so mainly by its flexural rigidity. In addition, the reduction of soil stiffness beneath the circular tunnel was larger than that in horseshoe shaped tunnel at each level of relative density, indicating that large portion of tunneling effect were undertaken by the ground itself in circular tunnel case.

• Economic Analysis
• /
• v.17 no.4
• /
• pp.30-51
• /
• 2011

Since the previous studies on the effects of trade liberalization implicitly assume that trade liberalization affects economic performance only in any point in time, they inevitably are static. Static evaluations fail to account for cumulative dynamic effects of trade liberalization that affect continuously economic performance. This paper tries to fill this gap of the previous studies in this field, estimating cumulative effects of trade liberalization on economic performance by employing an dynamic version of empirical model. One of important empirical issue is controlling bias from endogeneity. To resolve this problem, this paper employes system GMM that uses lagged first-differences as instruments for level equations and lagged levels as instruments for first-differences equations. It improves upon cross-section estimators because it controls for the potential bias induced by the omission of industry-specific effects and the endogeneity of all regressors. This study investigates the effects of trade liberalization in Korean manufacturing for the period from 1988 to 2005 and finds that cumulative dynamic effects of trade liberalization are present and bigger than static effects.

• Advances in nano research
• /
• v.15 no.5
• /
• pp.441-449
• /
• 2023

Heavy metals, widely present in the environment, have become significant pollutants due to their excessive use in industries and technology. Their non-degradable nature poses a persistent environmental problem, leading to potential acute or chronic poisoning from prolonged exposure. Recent research has focused on separating heavy metals, particularly from industrial and mining sources. Industries such as metal plating, mining operations, tanning, wood and chipboard production, industrial paint and textile manufacturing, as well as oil refining, are major contributors of heavy metals in water sources. Therefore, removing heavy metals from water is crucial, especially for safe water supply in swimming and water sports. Iron oxide nanoparticles have proven to be highly effective adsorbents for water contaminants, and efforts have been made to enhance their efficiency and absorption capabilities through surface modifications. Nanoparticles synthesized using plant extracts can effectively bind with heavy metal ions by modifying the nanoparticle surface with plant components, thereby increasing the efficiency of heavy metal removal. This study focuses on removing lead from industrial wastewater using environmentally friendly, cost-effective iron nanoparticles synthesized with Genovese basil extract. The synthesis of nanoparticles is confirmed through analysis using Transmission Electron Microscope (TEM) and X-ray diffraction, validating their spherical shape and nanometer-scale dimensions. The method used in this study has a low detection limit of 0.031 ppm for measuring lead concentration, making it suitable for ensuring water safety in swimming and water sports.