• Carbon letters
• /
• v.15 no.3
• /
• pp.171-179
• /
• 2014

An attempt was made to investigate the effect of the preparation temperature on the electrocapacitive performance of polypyrrole (PPY)/graphene oxide (GO) nanocomposites (PNCs). For this purpose, a series of PNCs were prepared at various temperatures by the cetyltrimethylammonium bromide-assisted dilute-solution polymerization of pyrrole in presence of GO (wt%) ranging from 1.0 to 4.0 with ferric chloride as an oxidant. The formation of the PNCs was ascertained through Fourier-transform infrared spectrometry, X-ray diffraction spectra, scanning electron microscopy and simultaneous thermogravimetric-differential scanning calorimetry. The electrocapacitive performance of the electrodes derived from sulphonated polysulphone-bound PNCs was evaluated through cyclic voltammetry with reference to Ag/AgCl at a scan rate (V/s) ranging from 0.2 and 0.001 in potassium hydroxide (1.0 M). The incorporation of GO into the PPY matrix at a reduced temperature has a pronounced effect on the electrocapacitive performance of PNCs. Under identical scan rates (0.001 V/s), PNCs prepared at $10{\pm}1^{\circ}C$ render improved specific conductivity (526.33 F/g) and power density (731.19 W/Kg) values compared to those prepared at $30{\pm}1^{\circ}C$ (217.69 F/g, 279.43 W/Kg). PNCs prepared at $10{\pm}1^{\circ}C$ rendered a capacitive retention rate of ~96% during the first 500 cycles. This indicates the excellent cyclic stability of the PNCs prepared at reduced temperatures for supercapacitor applications.

• Journal of the Korean Chemical Society
• /
• v.21 no.4
• /
• pp.227-234
• /
• 1977

The reaction of phenylhydrazine with bromine in sulfuric acid solution has been studied kinetically. The pseudo-second-order rate constant is approximately inversely proportional to hydrogen-ion concentration when the concentration of sulfuric acid is lower than 1M. arom the study of the effect of potassium bromide concentration on the rate constant, it is concluded that both neutral bromine and tribromide ion participate in the reaction, the rate constants in 0.01M $H_2SO_4$ being $5{\times}10^5M^{-1},sec^{-1}\;and\;0. 7{\times}10^5M^{-1},sec^{-1}$, respectively at $20^{\circ}C$. The pseudo-second-order rate constant of 2.4-dinitrophenylhydrazine-bromine reaction is independent of hydrogen ion concentration. From the KBr addition experiment, the rate constants for $Br_2\;and\;Br_3^-$ were obtained as $1.2{\times}10^5M^{-1},sec^{-1}\;and\;2.0{\times}10^4M^{-1},sec^{-1}$, respectively.

• Korean Journal of Microbiology
• /
• v.44 no.2
• /
• pp.116-121
• /
• 2008

In my search of microbial source of novel enzymes, a marine actinomycetes, A1460, producing haloperoxidase was isolated from macroalgae from south sea, Korea and studied for physiological and biochemical properties. The haloperoxidation reaction was followed by the bromination of phenol red in the presence of hydrogen peroxide and potassium bromide. The haloperoxidase was partially purified from the cell extract with $35\sim75%$ ammonium sulfate precipitation, High-Q anion exchange chromatography, gel filtration chromatography, hydroxyapetite chromatography and hydrophobic interaction chromatography to a yield of 42% and purification fold of 70. This enzyme showed relatively high heat stability without losing 50% of activity after 1 hr incubation at $60^{\circ}C$. The highest activity was found at $45^{\circ}C$, and the optimal pH was about pH 7, but higher stability was observed at pH 8. Azide and cyanide ion showed strong inhibition at less than 1 $\mu M$ level suggesting that the enzyme was Fe ion dependent haloperoxidase.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.3
• /
• pp.333-342
• /
• 2006

Statement of problem. Although many studies have been carried out to investigate the correlation between the degree of conversion and the flexural strength of composite resins, there is minimal information in the literature attempting to compare degree of conversion, flexural strength and their correlation between restorative composite resins and flowable composite resins. Purpose. The purposes of this study were to measure the degree of conversion and flexural strength of composite resins with different rheological behavior and to correlate the two properties. Materials and methods. Four restorative (Vit-1-escence, Z-250, Tetric ceram, Esthet-X) and four flowable (Aeliteflo, Admiraflow, Permaflo, Revolution) light-curing composite resins were investigated. The degree of conversion(DC) was analyzed with Fourier transfer infra-red spectroscopy(FTIR) spectrum by a potassium bromide(KBr) pellet transmission method. The spectrum of the unpolymerized specimen had been measured before the specimen was irradiated for 60s with a visible light curing unit. The Poiymerized specimen was scanned for its in spectrum. The flexural strength(FS) was measured with 3-point bending test according to ISO 4049 after storage in water at $37^{\circ}C$ for 24 hours. The data were statistically analyzed by an independent sample t-test and one-way ANOVA at the significance level of 0.05. The dependence of flexural strength on the degree of conversion was also analyzed by regression analysis. Results. Mean DC and FS values ranged from 43% to 61% and from 84.7MPa to 156.7MPa respectively. DC values of the flowable composite resins were significantly higher than those of restorative composite resins (P < 0.05). The FS values of restorative composite resins were greater than those of flowable composite resins. No statistically significant correlation was observed between the DC and the FS tested in any of the composites. The dependence of FS on DC in restorative or flowable composite resins was not significant. Conclusion. It can be concluded that radical polymerization of the organic matrix is not a major factor in determining flexural strength of the commercially available composite resins.

• 보존과학연구
• /
• s.14
• /
• pp.94-108
• /
• 1993

The cultural properties of cloth are of animal orgin (silk), or of vegetable orgin(cotton, hemp, ramie). As clothes are of an orginic material, they were subjected to damage by chemical, phisigical or biological factors, viz, moulds insects, lights, humidity and temperature changes, etc. And these factors promote that clothes generally result from various types of deterioration. In 1992, We were performed the conservation treatments for total 9 pieces of cloth, such as 3 pieces of General PAK SHIN-RYONG(Important Folklore Material No.110) 3 pieces of Madam Jung(Important Folklore Material No.115) and 1 piece of King Se-jo(Important Folklore Material No.219). The procedure of the conservation treatment for clothes describe the following below. 1) The washing and dry-cleaning to remove the contaminated substances from cloth was used 0.2% stearyl potassium soap solution and the mixture solution compound of n-Hexane, C6H14. and n-Decane, C10H22. And after the washing and dry-cleaning, the dry of clothes was carried out in a warm condition. These steps were repeated in 2 times over for each cloth. 2) The repair of clothes was attached the similar textiles to stronger fabric linings by needlework.3) The reprodution was made for cloth of King Se-jo to equalize the type, color, quality and skill of materials. 4) After these above procedures, all clothes fumigated to prevent the biodeterioration by using the mixed gas of methyl bromide and ethylene oxide as insecticide and fungicide. 5) Finally for the purpose to keep in a safety long-term condition, the treated clothes sealed with Biaxially Oriented Polyvinylacohol Film(BO-PVA film) and Helium, purity 99.999%, filled up in sealed BO-PVA film bag.

• Korean Chemical Engineering Research
• /
• v.49 no.3
• /
• pp.330-337
• /
• 2011

In this research, the preparation processes for making a series of $\omega$-mercapto alkylamine 1 and $\omega$-mercapto alkanoic acid 2 useful for studying of the self-assembled monolayer(SAM) are described. The preparation methods of the first goal materials, $\omega$-mercapto alkylamines 1 were carried out as follows: First, $\omega$-phthalimide alkanol 3 was synthesized from commercially available potassium phthalimide derivatives and $\omega$-bromoalkanol in DMF at $80{^{\circ}C}$ via substitution reaction. After refluxing $\omega$-phthalimide alkanol 3 with hydrazine hydrate in ethanol followed by treating with c-HCl, $\omega$-aminoalkanol 4 was obtained in 76-98% yield, accompanied with side-product 5. Bromination of hydroxyl moiety of $\omega$-aminoalkanol 4 using aqueous hydrobromic acid furnished $\omega$-bromoamine 6 in 34-97% yields. Substitution reaction 6 with thiourea in 95% ethanol gave $\omega$-aminoalkanthiuronium 7, which was treated with aqueous strong base and aqueous strong sulfuric acid gave desired products, $\omega$-mercapto alkylamines 1 through overall 5 steps. The second target material, $\omega$-mercapto alkanoic acid 2 was prepared via 2 steps. $\omega$-bromo alkanoic acid was reacted with thiourea to give $\omega$-thiourea alkanoic acid 7 in 69-85%, which was treated with aqueous strong base and strong acid to furnish $\omega$-mercapto alkanoic acid 2 in 50-98%. The fabricated long-chain alkylthiol(LCAT) can be used as linkers to immobilize protein, enzyme and various kinds of biomolecules on the surface of metallic materials(Au, Pt, Ti) by SAM, and can be useful chemical tools for the application study on the surface modification of metallic materials.