• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 1999년도 춘계 학술논문발표회 논문집
• /
• pp.207-214
• /
• 1999

카세트식 이동식부탄연소기의 사고는 과열에 의한 화재뿐만 아니라 접합용기의 파열에 따른 피해가 더 큰 위험성을 내포하고 있다. 접합용기의 파열원인은 화재에 의한 파열과 접합용기 장착 불량에 의한 가스누출로 화염에 의한 파열, 그리고 과대 조리기구를 사용하여 조리기구 및 화염에서 발생되는 열이 접합용기에 전달되어 온도상승에 따른 파열로 구분된다. 현재 카세트식 이동식부탄연소기의 조리기구 크기에 따라 과열에 따른 정확한 검증이 부족하며, 사용자에게 사용장소와 조리기구외 크기만 권고하고 있어 이에 대한 자료가 필요하다. (중략)

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2007년도 학술대회 1부
• /
• pp.887-890
• /
• 2007

디제잉을 하려면 필수적으로, 턴테이블, 믹서, 스피커와 같은 장비들이 필요하다. 하지만 이러한 장비들은 그 크기가 크고 많은 연결선으로 연결되기 때문에 휴대가 용이하지 않아, 일반인들이 가지고 다니면서 디제잉을 즐기고 음악을 믹싱하기에 적합하지 않다. 많은 사람들이 디제잉과 믹싱을 배우고, 또 언제 어디에서나 쉽게 즐길 수 있게 하기 위해서는 보다 작고, 휴대하기 편하면서도 설치의 번거로움이 없는 새로운 인터페이스를 개발할 필요성이 있다. 이 논문에서는 사람들이 언제 어디에서나 쉽게 디제잉과 믹싱을 즐길 수 있도록 해주는 휴대용 무선 믹싱콘솔 장치를 제안한다.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2005년도 춘계 학술발표대회 논문집
• /
• pp.36-37
• /
• 2005

• 센서학회지
• /
• 제12권3호
• /
• pp.121-127
• /
• 2003

본 논문에서는 포터블 뇌파 바이오피드백시스템을 위한 전치증폭부 및 디지털 신호처리부의 하드웨어 구현에 대한 연구를 수행하였다. 뇌파의 특성을 고려하여 외부 잡음을 제거할 수 있는 뇌파 획득용 전치증폭부를 구현하였다. 측정된 뇌파에는 안전도, 근전도, 심전도 등의 신호들이 포함되어 있으며 이들은 뇌파 분석에 방해가 된다. 따라서 이러한 신호들을 제거하기 위하여 적응여파기 알고리즘을 수행하고 전치증폭부를 실시간으로 구동하는 디지털신호처리부를 구현하였다. 시뮬레이션 파형과 실제 뇌파를 적용한 실험결과를 통하여 개발된 시스템의 성능을 확인 할 수 있었으며 휴대형 뇌파바이오피드백 시스템에 적용 가능함을 확인하였다.

• 한국물환경학회지
• /
• 제27권5호
• /
• pp.634-645
• /
• 2011

A newly developed rainwater harvesting (RWH) system reliability model is evaluated for roof area of buildings in Haeundae District of Busan. RWH system is used to supply water for toilet flushing, back garden irrigation, and air cooling. This model is portable because it is based on a non-parametric precipitation generation algorithm using a markov chain. Precipitation occurrence is simulated using transition probabilities derived for each day of the year based on the historical probability of wet and dry day state changes. Precipitation amounts are selected from a matrix of historical values within a moving 30 day window that is centered on the target day. Then, the reliability of RWH system is determined for catchment area and tank volume ranges using synthetic precipitation data. As a result, the synthetic rainfall data well reproduced the characteristics of precipitation in Busan. Also the reliabilities of RWH system for each of demands were computed to high values. Furthermore, for study area using the RWH system, reduction efficiencies for rooftop runoff inputs to the sewer system and potable water demand are evaluated for 23%, 53%, respectively.

• 한국국방경영분석학회지
• /
• 제11권1호
• /
• pp.87-110
• /
• 1985

This paper presents optimum policy of water supply distribution of the Osaka Prefecural Waterworks System located in the midwest of Japanese Islands. Owing to the ever increasing demand for water, the Osaka Prefectural Government endeavors to expand potable and industrial water distribution system to satisfy the growing water demand of the constituents under its jurisdiction. In this regard, the paper discusses a problem of establishing an efficient and effective water distribution system. The criteria to be considered are stability of water level at the reservoirs, stability of flow in the network, and the water treatment and distribution cost. These objective functions may be combined to form a multiple objective optimization problem or may be used independently and formulated into single objective optimization problems.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.473-476
• /
• 2002

Micro turbine that is a component of micro power system refers to turbines on the scale of centimeters which can transmit power on the order of tens of Watts. Such devices can be used as propulsion or power generation devices for various potable and micro devices. An interdisciplinary team at Seoul National University has designed, fabricated and tested such a device, and this paper describes test results.

• 한국환경보건학회지
• /
• 제17권2호
• /
• pp.27-34
• /
• 1991

This study was carried out to investigate the use habit of drinking water. The survey data were collected from 1,282 of students and 175 of officers from September 1990 to June 1991 in Pusan city and the South of Kyung sang-do. The use rate of tap water among respondents was 33.5%, and the reasons that the others avoid using tap water were having the risk of heavy metals contamination and unsanitary. The 80% of respondents have drunk spring water or bottled water within two or three years. The keeping method of them were 53% in the refrigerator, and 33% in the indoor. The use rate of water vessels what were equipped in mineral springs was 85%. It's advisable that the picking of mineral water be cautious within two or three days after rain. The holding rate of water purifier in respondents was about 20%, and it was purchased within one or two years and the reliance degree of that in users was below 50%.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권1호
• /
• pp.46-51
• /
• 2007

Environmental contamination creates shortages of potable water. In such situations, the leakage of water due to breakage or aging of rubber valve seats is a serious problem. Rubber is apt to break when it is placed between two materials that contact each other. One way to avoid water leakage due to rubber damage and breakdown is to replace the rubber with metal, which is currently taking place in water distribution systems. In tribology, a severe form of wear is characterized by local macroscopic material transfer or removal, or by problems with sliding protrusions when two solid surfaces experience relative sliding under load. One of the major problems when metal slides is the occurrence of galling. Experimentally, various conditions influence incipient galling, such as hardness, surface roughness, temperature, load, velocity, and the external environment. This study sought to verify the galling tendencies of metal according to its hardness, surface roughness, load, and sliding velocity, and determine the quantitative effect of each factor on the galling tendencies.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.836-839
• /
• 2004

Qualitative elevation of products is very important Part. A business racking us brains to find for qualitative elevation of products. Recently, measurement accuracy of a non-contact 3D scanner has been rapidly improving. As a result, the number application cases of non-contact 3D scanners are increasing. A non-contact 3D scanner is capable of measuring a curved surface rapidly and has high resolution. It is more affordable and potable than the CMMs, It is therefore expected to be applied more frequently in more diverse industries. Automating the measuring process using a non-contact 3D scanner and developing a technology, which allows a user to measure easily, will eventually improve the quality of products. As their inspection and analysis processes improve.