• 제목/요약/키워드: Pot size

검색결과 134건 처리시간 0.028초

어린 대문어(Octopus dofleini) 보호를 위한 통발의 탈출장치 적용에 대한 실험적 고찰 (An experimental study on the application of escape device in a net pot for protecting of small giant octopus (Octopus dofleini))

  • 김성훈
    • 수산해양기술연구
    • /
    • 제58권3호
    • /
    • pp.193-198
    • /
    • 2022
  • In this study, for the purpose of reducing the catch of small giant octopus in a net pot, an escape experiment of octopus was performed on five types of escape rings of different sizes. As a result of the experiment, the smallest giant octopus with a weight of 406 g was found to escape from an escape ring with a diameter of 30 mm or larger, and 592 g octopus, a weight similar to the octopus of the current minimum landing weight (600 g), escaped from an escape ring with a diameter of larger than 40 mm. An individual weight with 406 g becomes 39 mm when converted from a diameter of 25 mm circular escape vent; that is, the circumference to the inner diameter of the mesh. It can be inferred that the converted mesh size of 39 mm cannot escape. Logistic regression analysis was performed using a generalized linear model (GLM) to investigate the correlation between the ratio of escape ring size/Mantle diameter (R/MD) and the escape rate. As a result, it was found that there was a significant correlation between the R/MD ratio and the escape rate and that the higher the R/MD ratio, the greater the escape rate. As a result of logistic regression analysis, the R/MD value was denoted 0.520 with the 50% escape rate. In addition, it can be estimated to be about 50 mm when converted to the mesh size. Therefore, in this study, the diameter of the escape ring and the size of the escape possible of the octopus were experimentally considered. It was found that there was a significant correlation.

POT 방법을 이용한 이변량 빈도해석 적정 표본크기 연구 (Study on Optimal Sample Size for Bivariate Frequency Anlaysis using POT)

  • 주경원;김한빈;남우성;허준행
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2015년도 학술발표회
    • /
    • pp.38-38
    • /
    • 2015
  • 최근 다변량 확률모형을 이용한 빈도해석이 여러 수문분야에 걸쳐 연구되고 있다. 기존 일변량 빈도해석에 비해 변수활용에 대한 자유도와 물리적 현상을 정확하게 표현할 수 있다는 장점이 있으나, 표본자료의 부족, 매개변수 추정 및 적합도 검정 등의 어려움으로 실제 분야에 사용되기 어려운 점이 있다. 본 연구에서는 copula 모형에 대하여 Cramer-von Mises(CVM) 적합도 검정 시 표본자료의 적정 크기를 결정하기 위하여 Peaks-Over-Threshold(POT) 방법을 이용하였다. 서울지점의 기상청 시강우 자료를 이용하여 빈도해석을 수행하였으며, Gumbel copula 모형에 대하여 매개변수 추정은 maximum pseudolikelihood method(MPL) 방법을 이용하였다. 50년의 기록 자료에 대하여 표본크기를 50개부터 2500개까지 조절하여 CVM 통계값과 p-value를 기준으로 적정 표본크기를 산정하였다.

  • PDF

인천시 초등학교 급식에서 자주 제공되는 음식의 기호도와 섭취량에 따른 1 인 적정량 설정을 위한 기초 연구 - 2 . 인천시 초등학교 급식에서 자주 제공되는 음식 섭취량의 실태 조사 (Preliminary Study on the Establishment of Proper Portion Using Consumed Size and Food Preference of Frequently Served Meals in the Elementary School Lunch Program in Inchon - 2 . A Study on the Consumption Size of Frequently Served Meals in the Eleme)

  • 이윤주;장경자
    • 대한영양사협회학술지
    • /
    • 제4권2호
    • /
    • pp.132-144
    • /
    • 1998
  • The purpose of this study is setting proper portion by consumed size of food and food preference and then reducing plate wasts in school lunch. The survey was conducted from Oct. 21 to Nov. 22, 1996 through the practical measurement and questionnaires. The subjects were 43 students of 1 elementary school. The results of this survey was as follows : 1. Average consumption size of cooked rice was 115g. Average consumption size of one course dishes was 209g. The soup & pot stewes showed lower consumption rate than the other kind of foods. Average consumption size of fresh & boiled salad was 23.4g Average consumption size of stir fries was 55g. Average consumption size of steams & stewes was 42g. Most grill & fried foods showed high consumption rate compared to most of the other foods. Average consumption size of kimchies was 10.6g. The most of given desserts except apple were all consumed. 2. There was significant correlation between food preference and consumption rate for total food items. 3. Response of satisfaction about serving size of most of given foods except fresh & boiled salads, soup & pot stewes and kimchies were "moderate". 4. Visual estimation was greater than physical estimation for most of given foods. Proper portion of foods per person by results were setted as follows :

  • PDF

단체급식소에서 제공되는 음식의 적정분량 설정에 관한 연구(II) - 산업체급식소와 대학기숙사 급식소를 대상으로 - (A Study on the Actual Condition for Portion Control of Meal Served by Food Service Operation)

  • 김혜영;김춘매;고성희
    • 한국식생활문화학회지
    • /
    • 제12권1호
    • /
    • pp.79-86
    • /
    • 1997
  • Well-balanced meal is very important in its quantity and quality. Especially on the quantity field it becomes difficult for a foodservice operation to decide proper portion for individuals uniformly. These study was focused to setting up a proper portion by each food service operation. The results obtained were: 1. Individual consumption size from dormitory food service of college: cooked rice 282 g, soups 161 g, pot stewes 162 g, stir fries 53 g, stews 32 g, kimchies 47 g, fresh and boiled salads 43 g, one course dishies 477 g, pan broiles 44 g, meunieres 124 g. Individual consumption size from industry foodservice (white collar worker): cooked rices 228 g, soups 205 g, pot stewes 251 g, stir fries 20 g, stewes 76 g, kimchies 57 g, fresh and boiled salads 36 g, one course dishies 423 g, pan broiles 63 g, meunieres 38 g. 2. Proper portion of meal based on a statistical data is as follows: at college foodservice - cooked rices $280{\sim}290$ g, soups $155{\sim}170$ g, pot stewes 170 g, stir fries 60 g, stewes 35 g, kimchies $40{\sim}60$ g, fresh and boiled salads 50 g, one course dishies 480 g, pan broiles 50 g, meunieres 130 g and at industry foodservice (white collar worker) - cooked rices $220{\sim}250$ g, soups 210 g, pot stewes 250 g, stir fries 20 g, stewes 80 g, kimchies 60 g, fresh and boiled salads 40 g, one course dishies 430 g, pan broiles 70 g, meunieres 40 g.

  • PDF

산업체 급식의 1인 적정섭취량 (A Study on the Development of Properly Portioned Meal Sizes in the Industry Foodservice)

  • 조희숙
    • 한국식품영양학회지
    • /
    • 제12권1호
    • /
    • pp.26-32
    • /
    • 1999
  • The purpose of this study is to set up a appropriate portion by consumed size of food in industry food-service operation. The results were summarized as follows: 51.7% of the subjects were 30 to 39 years old 83.3% of them had highschool education. They represented that taste of food intake. Individual consumption sizes for physical workers in the industry foodservice were cooked rices 238g soups 212g pot stewes 230g stir fries 40g stewes 60g fresh and boiled salad 42g kimchies 51g one course dishies 406g grills 51g meunieres 47g. Properly portioned meal sizes for physical workers based on a statistical data showed cooked rices 240∼270g soups 270g pot stewes 310g stir fries 60g stewes 75g fresh and boiled salads 76g kimchies 67g one course dishies 470g grills 80g and meunieres 50g in the foodservice industry.

  • PDF

붕장어의 어체재원과 어구강목과의 관계 ( 2 ) (Relationship between the Body Dimension of Sea Eel , Astroconger Myriaster and the Mesh Size of Fishing Gear ( 2 ))

  • 장충식;박병수;이명규
    • 수산해양기술연구
    • /
    • 제28권4호
    • /
    • pp.380-384
    • /
    • 1992
  • 통발 구멍의 직경을 4단계로 만들어 1988년 10월중에 남부해역에서 부산수산대학 실습선 402호와 403호로 조업을 하여 어획한 붕장어 Astroconger Myriaster의 전장을 측정하여 붕장어에 대한 장(1987)의 어체제원간 관계식의 타당성과 플라스틱 통발 구멍의 적정직경을 알아본 결과를 요약하면 다음과 같다. 1. 어체제원간의 관계식 D=0.07L-0.59은, 통발구멍의 직경 D값에 대한 전장 L 값 이상으로의 어획율이 P1, P2, P3와 P4 각각 97.4, 94.9, 100.0, 96.0%로 매우 타당성이 있다. 2. 붕장어 플라스틱 통발 구멍의 적정직경은 적어도 1.5cm 이상은 되어야 한다.

  • PDF

Uniconazole 농도가 분화용 감국의 생육 및 개화에 미치는 영향 (Effects of Uniconazole Treatment on the Growth and Floweringof Potted Chrysanthemum indicum L.)

  • 정성숙;정현환;김기선
    • 원예과학기술지
    • /
    • 제18권1호
    • /
    • pp.28-32
    • /
    • 2000
  • 본 연구는 uniconazole 농도가 감국의 생육 및 개화에 미치는 영향을 구명하여 가장 효과적인 방법을 찾음으로써 양질의 분화용 감국 생산을 위한 기초자료를 얻고자 실시되었다. 삽목 발근묘를 정식 후 2주째 적심하고 uniconazole을 농도별로 토양관주하였으며, 같은 농도(0.05mg a.i./pot)를 1회, 2회, 3회로 나누어 관주하고 동시에 단일처리와 적심처리를 행하여 감국의 생육 및 개화반응을 살펴본 결과, uniconazole을 0.05, 0.10, 0.15mg a.i./pot로 증가시킴에 따라 초장은 41.6, 52.5, 58.5%로 감소되었다. 측지수는 0.05 mg a.i./pot 처리구에서 가장 많이 증가되었으며 초장(22.6cm)도 18cm 화분에 적합하였다. 그러나, 높은 농도(0.10, 0.15mg a.i./pot)는 초장(17.0, 14.8cm)이 지나치게 짧아서 적합하지 않았다. 단일처리와 적심처리를 수행하는 경우에는 가시적인 화아발생시까지의 기간을 단축시켰지만, uniconazole 처리에 의해서는 적심과 단일처리시의 효과를 5~9일까지 지연시켰다. 화아수는 0.05mg a.i./pot에서 가장 많은 경향을 보였으나 꽃직경은 uniconazole 처리시에 감소하는 경향을 보여 꽃이 작고 많은 형태가 되었다. 또한 0.05mg a.i./pot를 1회에 처리한 경우에 화아발생시까지의 기간이 비교적 짧았으며, 화아수도 증가하였다. 따라서 정식후 2주째 적심과 단일처리 후 uniconazole 0.05mg a.i./pot를 1회 토양관주함으로써 화분과 균형을 이루는 초장을 얻을 수 있으며, compact type의 분화를 생산할 수 있을 것으로 판단되었다.

  • PDF

표면 알킬기를 갖는 실리콘 나노입자의 One-Pot 용액환원 합성 (One-Pot Synthesis of Alkyl-Terminated Silicon Nanoparticles by Solution Reduction)

  • 윤태균;조미경;선양국;이정규
    • Korean Chemical Engineering Research
    • /
    • 제49권5호
    • /
    • pp.577-581
    • /
    • 2011
  • 가시광 영역에서 강한 광루미네선스(photoluminescence, PL) 특성이 있는 실리콘 나노입자는, 생물학적 형광 이미징, RGB(red, green, blue) 디스플레이, 포토닉스, 광전소자 등의 응용소재로 개발될 수 있어 많은 연구가 수행되고 있다. 실리콘 나노입자의 광학적 및 물리화학적 특성을 이용한 실용적인 응용 및 개발을 위해서는 그 특성의 조절이 용이한 제조법 개발이 필수적이다. 본 연구에서는 Na(naphthalide)를 환원제로 사용한 용액환원법을 이용하여 한 단계로 입자표면이 알킬기로 안정화된 평균 <10 nm 크기의 실리콘 나노입자를 합성할 수 있는 방안을 시도하였다. 이를 위하여 실리콘 전구체로 알킬기를 포함하고 있는 (Octyl)$SiCl_3$ 단독 또는 (Octyl)$SiCl_3$$SiCl_4$의 혼합물을 사용하여 Si-Cl 결합의 환원을 통한 입자의 형성과 동시에 반응물에 포함된 Octyl 기에 의한 표면 안정화를 한번에 달성할 수 있었다. 합성한 실리콘 입자의 TEM/EDS, FTIR 분석결과 입자의 크기는 <10 nm이며, 표면이 알킬기로 덮여있어 소수성 용제인 헥산에 쉽게 용해되었으며 입자표면은 소량의 산화된 Si-O-Si 그룹을 포함하고 있었다. UV-vis 및 PL 분석결과 표면 알킬기를 포함하는 실리콘 나노입자의 전형적인 광 특성을 보여 간단한 반응단계를 통하여 표면이 Octyl기로 덮인 실리콘 나노입자를 합성할 수 있음을 보였다. 본 연구에서 시도한 합성법을 응용할 경우, 향 후 실리콘 나노입자의 표면에 다양한 기능기를 one-pot으로 도입할 수 있을 것으로 기대된다.

배광성용기 사용이 생태녹화용 자작나무 유묘 생장에 미치는 영향 (Effects of a Negative-Phototropism Pot on the Seedling Growth of Betula platyphylla var. japonica for the Ecological Revegetation)

  • 강병연;김재환
    • Ecology and Resilient Infrastructure
    • /
    • 제6권4호
    • /
    • pp.295-303
    • /
    • 2019
  • 본 연구에서는 생태녹화용 유묘 생산에 적합한 재배용기를 선별하기 위하여 다양한 재배용기가 자작나무 유묘에 미치는 영향을 조사하였다. 실험에 사용한 용기는 일반용기, 일반용기 내부에 융기선 5 mm와 10 mm 설치, 일반용기 표면에 세로 절개홈 있는 배광성용기, 배광성용기 내부에 융기선 5 mm와 10 mm를 설치한 용기이었다. 재배용기에 따른 유묘생장 특성은 다음과 같다. 실험결과 온실 재배에서는 관수, 온도 등 관리도가 높아 수고, 가지수, 근원경 생장의 유의차가 없었으나, 뿌리생장은 유의차를 보이며 배광성용기에서 우수했다. 일반용기는 뿌리가 나선형의 비정상으로 자란 반면 배광성용기는 뿌리가 수직으로 자랐다. 노지이식 후 재배용기 처리에 따라 유의차를 보이며, 수고, 가지수, 근원경, 뿌리생장 모두 배광성용기에서 자란 유묘가 가장 우수한 것으로 나타났다. 배광성용기에서 자란 유묘의 경우 뿌리가 수직으로 생장해 노지 이식 후 뿌리활착 및 생장이 우수했으며, 용기내부에 설치한 융기선은 5 mm이내가 적정한 것으로 나타났다. 따라서 배광성용기를 사용한 생태녹화용 자작나무 유묘에서 수고, 가지수, 근원경 및 뿌리생장에 큰 효과를 보여 배광성용기가 유묘생산에 적합한 것으로 판단되었다.

극한치이론을 이용한 VAR 추정치의 유용성과 한계 - 우리나라 주식시장을 중심으로 - (Usefulness and Limitations of Extreme Value Theory VAR model : The Korean Stock Market)

  • 김규형;이준행
    • 재무관리연구
    • /
    • 제22권1호
    • /
    • pp.119-146
    • /
    • 2005
  • 본 연구는 극한치 이론을 적용하여 국내 주식시장에 대한 VAR값을 구하고 이의 유용성을 살펴보았다. 극한치모형으로는 블록최대값모형과 POT 모형을 이용하였고 백테스트를 통하여 이들 모형의 적정성을 알아보았다. 극한치모형 중 블록최대값 모형은 신뢰수준의 변화에 따라 VAR 추정치의 변동이 매우 큰 것으로 나타났으며, 블록의 크기를 어떻게 선택하는가에 따라 모수의 추정치가 크게 달라져 VAR값의 안정성이 떨어지는 것으로 나타났다. 이는 국내 주식시장에 대해 VAR 측정시 블록최대값 모형을 사용하는 것은 적절치 않음을 시사하는 것이다. 반면 POT모형은 임계치의 선택에 따라서 VAR 값이 달라지기는 하나 상대적으로 안정적인 모습을 보이며, 또한 백테스트 결과 97.5% 이상의 신뢰수준에서 VAR값이 델타 VAR에 비하여 우수한 성과를 보이는 것으로 나타났다. 특히 POT모형은 신뢰수준이 높아질수록 그 우월성이 높은 것으로 나타나, 주로 99% 이상의 높은 신뢰수준의 VAR값을 이용하는 경우에 위험의 관리수단으로 유용한 모형임을 시사하고 있다. 또한 극한치모형은 수익률의 왼쪽 꼬리와 오른쪽 꼬리를 분리하여 추정하고 이를 VAR의 계산에 이용하기 때문에, 수익률분포가 비대칭적 특징을 보이는 우리나라 주식시장의 VAR 측정시 적절한 방법임을 확인할 수 있었다.

  • PDF