• The Korean Journal of Mycology
• /
• v.30 no.1
• /
• pp.18-22
• /
• 2002

This study was carried to investigate efficient pot diameter and substrate weight in pot cultivation of Pleurotus ostreatus. Cultivating substrate was pine sawdust+beet pulp+cotten seed flour (50 : 30 : 20, v/v). Ranges of pot diameter and substrate weight were $10{\sim}20\;cm\;and\;600{\sim}2,500\;g/pot$, respectively. Smaller pot diameter resulted in longer pot length according to increasing substrate weight, so mycelial growth period and total cultivation period was retarded. Wider pot diameter resulted in a little lower biological efficiency in the same substrate weight. Heavier substrate weight was brought higher yield but lower biological efficiency. Average yield according to pot diameter was decreased at wider than 14 cm during second flush. And average biological efficiency according to substrate weight was lower than 100% at heavier than 1,200 g/pot during second flush. So suitable pot diameter and substrate weight in pot cultivation of Pleurotus ostreatus were estimated $10{\sim}14\;cm\;and\;800{\sim}1,200\;g$, respectively.

• Journal of the Korean Society of Safety
• /
• v.39 no.1
• /
• pp.1-8
• /
• 2024

Commercial gas stoves feed primary air to the burner and burn the fuel-air mixture in a partially premixed combustion. This mechanism produces carbon monoxide during combustion. In this study, design parameters of a commercial gas stove were optimized by considering the carbon monoxide emission. Gas consumption rate, carbon monoxide emission, and water boiling temperature as a heating performance were determined. Carbon monoxide emission was measured using a Korean Industrial Standards standard collector. Water boiling temperature was measured by first soaking the pot in water for approximately 10 min and then heating the pot filled with water. A thermocouple was installed inside the pot. Carbon monoxide increased as the nozzle diameter was increased and the burner-pot height was decreased. This result was due to the insufficient mixing between the fuel and air. Heating performance was enhanced when the nozzle diameter was increased and the burner-pot height was decreased. However, the heating performance deteriorated when the nozzle diameter was 1.8 mm and the burner-pot height was reduced to 50 mm. This phenomenon was due to the formation of a flame on the side of the pot. A merit factor was defined to find the optimal design parameters to satisfy gas consumption rate, carbon monoxide emission, and heating performance. Optimal design values were established to be a nozzle diameter of 1.5 mm and a burner-pot height of 60 mm.

• Korean Journal of Plant Resources
• /
• v.19 no.4
• /
• pp.521-523
• /
• 2006

This experiment was carried out to find out proper pot size and bottom irrigation interval for the flowerpot cultivation of Cyrtomium falcatum, 3 different pot sizes (5, 7, 10cm in diameter) and 3 irrigation interval (1 day, 3 days, 5 days) were treated by completely randomized design with 3 replications. Growth characteristics of Cyrtomium falcatum were investigated every 30 days after planting. The pot size of 7 to 10cm in diameter and the irrigation interval of 5 days appeared to be appropriate for Cyrtomium falcatum cultivation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.4
• /
• pp.380-384
• /
• 1992

The authors carried out an experimental fishing of Sea eel(Astroconger Myriaster) Pots to find the accuracy of the relationship formula between body dimensions and the optimum diameter of pot hole. The diameter of pot hole was used by an experimental fishing were 0.7, 0.9, 1.0, 1.5, 2.0cm. the number of pot were 271, 278, 283, 296 respectively. An experimental fishing was performed during October, 1988 in the southern Sea of Korea. The results obtained can be summarized as follows; 1. The relationship formula between body dimensions was very accurate. 2. Optimum diameter of pot hole must be made 1.5cm at least.

• Journal of Bio-Environment Control
• /
• v.6 no.2
• /
• pp.92-96
• /
• 1997

This study was carried out to clarify the effects of number of branches per pot on the growth and yield in long term bag-culture of sweet pepper. Two plants were grown in pot with four, six, and eight branches. The results are summarized as the followings : 1. Plant height, stem diameter, leaf dry weight, root dry weight, and stem dry weight did not significantly differ among treatments, while the number of leaves and leaf area were the greatest In the treatment with eight branches per pot. 2. Although fruit length was not influenced by the number of branches per pot, fruit diameter and fruit weight were greater with four branches per pot. The yield of the four branches was 124.5ton/ha, which was not significantly different from the yield of the eight branches, 113.4ton/ha. Considering the average fruit weight, fruit quality, and labor saving, four branches per pot appears to be appropriate. 3. Although the yield of eight branches per pot during the first five months was higher, however, four branches per pot should be recommended for the long term bag- culture of sweet pepper because the yield of the four branches from April, which is the middle stage of growth to the final harvest was higher than the yields of the others.

• Ecology and Resilient Infrastructure
• /
• v.6 no.4
• /
• pp.295-303
• /
• 2019

This study investigated the effects of various cultivation pots on Betula platyphylla var. japonica seedlings in order to select suitable pots for the production of healthy seedlings for the ecological revegetation. We used six types of the pots natural pot, natural pot with inside 5 mm width root turning bump, natural pot with inside 10 mm width root turning bump, negative-phototropism pot, negative-phototropism pot with inside 5 mm width root turning bump, and negative-phototropism pot with inside 10 mm width root turning bump. As greenhouse cultivation provided a high level of control of irrigation and temperature, the seedlings did not show any significant differences in plant height, number of branches, and diameter at root collar, but showed a significant difference in root growth among the different types of pots. The root growth was best in the negative-phototropism pot. In the negative-phototropism, the roots grew in a vertical shape, while they grew abnormally in a spiral shape in the natural pots. In outdoor cultivation, the growth of seedlings showed significant differences according to container types. The seedlings grown in specially manufactured negative-phototropism pots were most excellent in all of the height, number of branches, diameter at root collar and root growth. As for the seedlings grown in the negative-phototropism pots, their roots grew vertically and thus their rooting was well established after they were transplanted outdoor. A size of less than 5 mm ridge installed in the negative-phototropism was found to be appropriate for the seedling growth. These results showed that the negative-phototropism pot would be best suitable for the growth of Betula platyphylla var. japonica seedlings and for the production of seedling for ecological revegetation.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.24 no.2
• /
• pp.5-11
• /
• 2022

Prunus × yedoensis is a representative tree species in residential areas often used as a street tree or park tree, with its popularity due to splendid flowers in the spring. We investigated plant growth, photosynthesis, chlorophyll, and carotenoid concentrations of Prunus yedoensis at 400ml/pot, 1,000ml/pot, and 2,000ml/pot Irrigation treatments. Overall growth indices such as tree height, diameter at root collar (DRC), and total dry weight could be ranked in the decreasing order "2,000ml/pot > 1,000ml/pot > 400ml/pot.". However, 2,000ml/pot featured decreased photosynthesis and total chlorophyll carotenoid contents than 1,000ml/pot treatment after July. And also, The 1,000ml/pot treatment showed relatively high photosynthetic activity and chlorophyll contents. These results suggested that the cultivation of Prunus yedoensis under 1,000ml/pot Irrigation treatment(soil water contents 25~35%) showed the best condition in growth.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.4
• /
• pp.309-315
• /
• 1999

Rice seedling test was conducted to check the loging tolerance at ripening stage through evaluating the root characters. Thirteen Korean and foreign rice cultivars with direct seeding adaptable or high quality characteristics were grown in a cell pot and under submerged paddy. The root characters and pushing resistance of rice hill were determined at seedling and ripening stage, respectively. The diameter of crown root at the 7th and 8th leaf stages was thicker in lodging tolerance cultivars than those of others and showed significant-positive correlation with both pushing resistance and crown root diameter of mature plants. Also, the tensile strength of crown root at the 7th and 8th leaf stage showed highly positive correlation with the tensile strength of crown root of mature plants. The number of crown root at 7th leaf stage was significant-positively correlated with that of mature plant. The diameter of seminal root was not significantly correlated with the diameter of crown root throughout the whole growth stage. These results indicate that the diameter, tensile strength and number of crown root associated with root lodging tolerance can be detected with the seedling at about 7th or 8th leaf stage, and the seedling test using the cell pot is an useful and practical method to select lodging tolerant cultivars or lines of rice based on root characters, especially diameter of crown root.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.3
• /
• pp.193-198
• /
• 2022

In this study, for the purpose of reducing the catch of small giant octopus in a net pot, an escape experiment of octopus was performed on five types of escape rings of different sizes. As a result of the experiment, the smallest giant octopus with a weight of 406 g was found to escape from an escape ring with a diameter of 30 mm or larger, and 592 g octopus, a weight similar to the octopus of the current minimum landing weight (600 g), escaped from an escape ring with a diameter of larger than 40 mm. An individual weight with 406 g becomes 39 mm when converted from a diameter of 25 mm circular escape vent; that is, the circumference to the inner diameter of the mesh. It can be inferred that the converted mesh size of 39 mm cannot escape. Logistic regression analysis was performed using a generalized linear model (GLM) to investigate the correlation between the ratio of escape ring size/Mantle diameter (R/MD) and the escape rate. As a result, it was found that there was a significant correlation between the R/MD ratio and the escape rate and that the higher the R/MD ratio, the greater the escape rate. As a result of logistic regression analysis, the R/MD value was denoted 0.520 with the 50% escape rate. In addition, it can be estimated to be about 50 mm when converted to the mesh size. Therefore, in this study, the diameter of the escape ring and the size of the escape possible of the octopus were experimentally considered. It was found that there was a significant correlation.

• Journal of Bio-Environment Control
• /
• v.19 no.2
• /
• pp.82-87
• /
• 2010

To investigate effects of kind of pot for raising of seedling (single plastic pot, double plastic pot, circular peat pot, square peat pot) and planting method of the pot (3/3, 2/3, and 1/3 by the buried degree of pot height) on watermelon (Citrullus lanatus) growth, this research was conducted under plastic film house. Since planting of seedlings, number, area and photosynthesis rate of leaves, plant height and weight were superior in seedling grown in double plastic pot than those grown in the others. In fruit characteristics harvested at 12 weeks after planting, fruit height, diameter and weight were longer in double plastic pot than in the others, also fruit peel thickness and hilum diameter were thicker and shorter. Initial growth of the plant after planting with seedling grown in double plastic pot was superior in method buried the 2/3 degree of the pot height than the other methods.